···
Log in / Register

How to reset the maintenance light on a Haval H2?

4Answers
StLydia
09/06/2025, 03:10:00 AM

Here are the steps to reset the maintenance light on a Haval H2: 1. Press the one-touch start button to power on the vehicle, then press the MODE button on the left side of the multifunction steering wheel. 2. Next, press the SET button on the right side of the multifunction steering wheel and the OK button on the left side of the steering wheel. 3. Finally, observe the vehicle dashboard, and you will notice that the maintenance reminder light has been reset. Additional information: The Haval H2 is a compact SUV launched by Haval, a sub-brand of Great Wall Motors. With body dimensions of 4330/1815/1700mm, it closely approaches the size of a compact SUV. The Haval H2 is the first domestic model to adopt a mix-and-match design concept.

Was this review help?
102
Share
DianaRose
09/18/2025, 02:50:37 AM

I previously performed the maintenance light reset for my Haval H2 myself. Before starting, remember to turn on the vehicle but don't press the accelerator. Locate the small cylindrical button on the right side of the instrument panel in the driver's seat—the one used to toggle the odometer. Press and hold it for about ten seconds without releasing; you'll see the wrench icon on the instrument panel start flashing. At this point, release the button, turn off the ignition, and restart the vehicle to find the maintenance light has disappeared. However, note that the procedure may vary slightly for different model years of the H2. For example, my neighbor's 2018 model requires using the menu button on the steering wheel. If you can't manage it, just take it to a repair shop and let the technician handle it with a computer—avoid tampering with the wiring yourself.

Was this review help?
10
Share
Expand All
HaileyMarie
11/01/2025, 03:17:19 AM

As someone who frequently works with Haval models, I've found that resetting the maintenance light hinges on locating the correct physical buttons. First, shift to P gear with the engine running. The difference between older and newer models lies in: For pre-2015 H2 models, use the rotary knob on the right side of the instrument cluster - turn it clockwise to the end and hold for 20 seconds. For newer models, use the selector button on the left side of the steering wheel - press rapidly three times to enter engineering mode. I recommend checking the warning light section in the maintenance manual before operating, as some owners accidentally press the tire pressure monitoring button and end up locking the system. After resetting, don't forget to update the maintenance cycle records, such as recalculating the engine oil life.

Was this review help?
18
Share
Expand All
VanKhloe
12/15/2025, 02:25:20 AM

Recently helped my cousin reset the maintenance reminder light on her Haval H2. The process was quite simple: First, turn off the engine but keep the electrical system on. Locate the black stalk behind the steering wheel and toggle it until the maintenance menu appears on the instrument cluster. For newer models, find the gear-shaped button in the control area on the left side of the steering wheel. Press and hold for over 5 seconds until the confirmation prompt appears on the screen before releasing. Note that keeping your foot on the brake pedal during the operation is safer. The whole process takes less than a minute. Even a novice like my cousin could do it successfully, so there's no need to be nervous.

Was this review help?
16
Share
Expand All
More Q&A

What are the symptoms of a broken lower control arm?

Symptoms of a broken lower control arm are as follows: 1. When the lower control arm is damaged, the vehicle's tires will exhibit abnormal wobbling during driving, leading to irregular tire wear, increased noise compared to normal conditions, and unstable driving. 2. Damage to the lower control arm causes dynamic stability imbalance in the vehicle, and severe cases of lower control arm breakage can result in loss of control over driving and steering. The replacement method for a broken lower control arm is as follows: 3. Lift the vehicle, remove both ends of the triangular arm, and select two iron sleeves of corresponding sizes to fit the rubber bushings. 4. Remove the screws, install new lower control arm rubber bushings coated with detergent for lubrication, and then reassemble in reverse order. 5. The replacement of the lower control arm rubber bushings should not be done carelessly. It requires professional adherence to parameter specifications, with a specific sequence of steps that must not be altered.
120
Share

How to Use the Air Conditioning in a Nissan Sylphy?

Here are the specific steps to use the air conditioning in a Nissan Sylphy: 1. The control panel is located on the center console. Press the AUTO button to activate the automatic mode, where the system will automatically adjust the rear area temperature, blower speed, and air circulation distribution. 2. The OFF button is used to turn off the air conditioning system. 3. The A/C cooling switch is used to turn the air conditioning cooling on or off. Press the A/C switch to activate the cooling function. Below is an introduction to the air conditioning system: 1. The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the cabin. 2. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety. The air conditioning system has become one of the indicators of a car's functionality. 3. The car air conditioning refrigeration system consists of a compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. 4. During operation, the refrigerant circulates in different states within the closed system.
103
Share

How to Solve the Loose and Noisy Brake Caliper?

Solutions for loose and noisy brake caliper: Check the brake caliper. If the piston ring of the brake caliper is stuck, the brake caliper needs to be replaced; if the metal piece fixing the brake pad of the brake caliper is deformed, replace this metal piece. The brake caliper is an indispensable part of the braking system, mainly functioning to push the brake pad, which then rubs against the brake drum to reduce speed or bring the vehicle to a stop. After pressing the brake pedal, the master cylinder generates thrust to push hydraulic fluid to the caliper, and the piston inside the caliper moves under hydraulic pressure to push the brake pad. The hydraulic brake system consists of the master cylinder and the brake fluid reservoir, connected to the brake pedal at one end and the brake fluid pipe at the other. The master cylinder contains brake fluid and has an oil outlet and an oil inlet.
120
Share

What are the differences between the new Audi Q3 Elegance and Sport models?

The differences between the new Audi Q3 Elegance and Sport models: 1. Different side body design: The Elegance model lacks the RS badge on the front fender, while the Sport model features a small RS badge on the front fender. 2. Different body colors: The Elegance model has black lower skirts, while the Sport model's lower skirts match the body color. 3. Different colors and shapes of the lower bumper: The Elegance model combines black with silver-gray, while the Sport model's bumper matches the body color. The new Audi Q3 has a body length, width, and height of 4484mm, 1856mm, and 1616mm respectively, with a wheelbase of 2680mm. The increased wheelbase enhances the rear seating space, improving passenger comfort. Viewed from the side, the new Audi Q3's front and rear headlights exhibit a symmetrical design, with the waistline connecting them to create a sense of harmony and muscularity. The wheel arch decorations also enhance the vehicle's off-road style appearance.
102
Share

What Causes the Noise in the Steering Gear Rack and Pinion?

Noise in the steering gear rack and pinion may be caused by lack of lubrication, steering gear failure, insufficient tire pressure, and other reasons. Lack of Lubrication: If there is a lack of lubrication in the screws inside the steering wheel, it is necessary to remove the steering wheel cover and add lubricating oil inside. This should lubricate the tracks and shafts, resolving the issue. Steering Gear Failure: The steering gear may also malfunction. Normally, if the steering is turned too sharply during operation, it places a greater load on the steering gear, leading to severe wear and resulting noise. It is recommended to inspect and replace the faulty components. Insufficient Tire Pressure: Uneven tire pressure in the left front or right front tire can cause the front of the car to deviate, leading to unbalanced car bearings and misaligned steering gear, which in turn causes noise and deviation.
113
Share

How many cylinders does the Hyundai Elantra have?

The Hyundai Elantra is equipped with a four-cylinder engine, offering two engine options: a 1.6L and a 1.4T. The main focus is on the 1.6L naturally aspirated engine, which features direct fuel injection technology, delivering a maximum power of 95.3 kW and a maximum torque of 157 Nm. It is paired with either a 6-speed manual or a 6-speed automatic transmission. The Hyundai Elantra has body dimensions of 4610mm in length, 1800mm in width, and 1450mm in height, with a wheelbase of 2700mm. In terms of features, the Elantra comes with an electric sunroof and a rearview camera, while higher trim levels also include front parking sensors. The Elantra offers three wheel designs, with sizes ranging from 16 inches to 17 inches, and tire specifications of 205/55R16 and 225/45R17.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.