Is the Power Difference Between 95 and 98 Octane Gasoline Noticeable?

1 Answers
VanEden
07/25/25 1:19am
The power difference between 95 and 98 octane gasoline is not noticeable. 95 and 98 octane gasoline are similar in terms of oil quality, composition, carbon deposit levels, and purity. There is no evidence that using 98 octane gasoline makes a car's performance significantly more powerful. The octane rating of gasoline is represented by its "octane number," and a higher octane number indicates a higher octane rating. Here are the differences between the two: 1. Different octane numbers: 98 octane gasoline has 98% isooctane, while 95 octane gasoline has 95% isooctane. 2. Different additive components: 98 octane gasoline consists of 98% isooctane and 2% n-heptane mixture, whereas 95 octane gasoline consists of 95% isooctane and 3% n-heptane. 3. Different characteristics: The advantages of 98 octane gasoline are "two highs and two lows," meaning higher anti-knock performance and power output, as well as lower harmful substances and exhaust pollution. On the other hand, 95 octane gasoline is mainly used in engines with high compression ratios. Using low-octane gasoline in high-compression engines can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. 4. Different prices: 98 octane gasoline is relatively more expensive than 95 octane gasoline.
Was this review help?
4
5
Share
More Forum Discussions

What are the width indicator lights on a car?

Car width indicator lights are the front and rear position lights installed along the edges of the vehicle's roof. They are primarily used during dusk, overcast days, or in rainy and foggy weather conditions to indicate the vehicle's width and height while driving. This helps other drivers determine relative positions and vehicle dimensions during encounters or overtaking. Typically, these lights are white at the front and red at the rear. A vehicle's lighting system includes several types such as daytime running lights, low beams, high beams, fog lights, turn signals, and reverse lights. The functions of low beams include: 1. In urban areas with street lighting, there's no need for high beams to illuminate distant road surfaces; it's sufficient to clearly see the road conditions ahead. 2. On busy city roads, using high beams during oncoming traffic can cause glare for other drivers and affect pedestrians' visibility.
13
3
Share

What are the maintenance precautions for the Avalon?

Regarding the maintenance precautions for the Avalon, the details are as follows: 1. Maintenance interval: The maintenance interval is 10,000 kilometers, and a vehicle inspection is required for the first 5,000 kilometers of a new car. The manufacturer provides free maintenance for the Avalon for 4 years or 100,000 kilometers, but please note that the manufacturer's offer is limited to basic maintenance. 2. Inspection scope: Replace engine oil and oil filter, clean the air filter; check whether the coolant level of the car is in a normal state. Inspect the car's brakes and whether there are any scratches on the chassis components; check whether the power steering fluid level is normal and whether there is any oil leakage at the oil pipe connections; inspect the aging and tension of the generator, air conditioning, water pump, and belts, etc.
13
3
Share

Where is the internal and external circulation of the 2017 Lavida?

The internal and external circulation of the 2017 Lavida is located next to the air conditioning control panel on the dashboard. The following is an introduction to the car's internal and external circulation: Introduction to external circulation: It uses a fan to draw air from outside the car into the interior, meaning the air passages between the outside and inside of the car are connected. The air blown by the fan comes from outside the car, and even if the fan is not turned on, airflow is still drawn into the car while driving, replenishing fresh air inside the car. Introduction to internal circulation: It closes the airflow passage between the inside and outside of the car. Without the fan, there is no airflow circulation, and when the fan is turned on, the airflow drawn in comes only from inside the car, forming an internal airflow circulation within the vehicle.
12
0
Share

What are the restrictions of Wuling sealed window vans?

Wuling sealed window vans have an obvious exterior restriction - all windows except the first row are completely sealed, hence the name "sealed window van". Essentially a cargo-type microvan, but compared to regular microvans, the sealed window version is longer and uses heavier-duty rear leaf springs than standard microvans to better handle heavy loads. Here's an extended introduction: Window introduction: Car windows are an essential component of the vehicle body, designed to meet requirements for interior lighting, ventilation, and visibility for drivers and passengers. Windows are categorized by installation position: front/rear windshields, side windows, and door windows. The design structure and quality of windows significantly impact driver visibility, passenger comfort, exterior aesthetics, and aerodynamic characteristics. Window structures are typically curved and sealed, with rubber sealing strips connecting the window frame to the glass. These seals provide both sealing and cushioning functions to prevent windshield damage when body forces cause frame deformation.
19
1
Share

Where is the urea nozzle located?

Urea nozzle is located on the exhaust pipe of diesel vehicles. The function of urea nozzle: quantitative injection of urea aqueous solution for exhaust after-treatment, which can reduce the emission of nitrogen oxides. Urea nozzle is a vulnerable part and needs to be cleaned and replaced frequently. Methods for cleaning urea nozzle: 1. Ultrasonic cleaning, using a small ultrasonic cleaning machine; 2. It is recommended to use hot water as cleaning liquid, and immerse the injection end into the liquid; 3. The cleaning time should be more than 15 minutes; 4. Perform functional test to drive the nozzle while cleaning it with ultrasonic, the cleaning effect will be better. In addition to mastering the correct method of cleaning urea nozzle, it is also important to remember not to use inferior urea solution. Because when the purity of urea solution is not enough, and there are impurities such as particles, heavy metal ions, and minerals, it will cause nozzle blockage failure and bring unnecessary economic losses.
9
1
Share

What Causes Sudden Stalling at Low Speeds?

Reasons for sudden stalling at low speeds: 1. Throttle sticking or deformation due to external force can easily cause stalling; 2. Open circuit, short circuit, or burn-out aging of the stepper motor can lead to low-speed stalling; 3. Fuel system issues, such as insufficient fuel pressure or fuel pump failure, may also result in stalling; 4. Clogged fuel injectors, which lead to poor fuel atomization and abnormal engine operation, can cause stalling; 5. Igniter burn-out, due to ignition voltage reaching tens of thousands of volts and oil accumulation at the ignition coil end, can cause abnormal ignition and stalling. If stalling occurs during deceleration or braking, you can increase braking force while paying attention to the surrounding situation. If possible, change lanes to bypass obstacles ahead. Since there is no power steering at this time, steering will feel heavier.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.