···
Log in / Register

Is the owner's ID card required for vehicle inspection?

4 Answers
DeAthena
08/26/25 5:38am

Annual inspection, commonly referred to as annual review, is also known as vehicle inspection or motor vehicle inspection. The original owner's ID card is not required for the vehicle inspection; someone else can conduct the inspection on behalf of the owner by bringing their own ID card. However, the vehicle must be driven to the inspection site, and the vehicle registration certificate must be brought along with the valid compulsory traffic insurance policy for that year. Below is relevant information about the annual inspection: 1. Scheduled time for annual inspection: For passenger cars and blue license plate minivans, the first six years after new vehicle registration require an inspection every two years; after six years, it becomes an annual inspection; after fifteen years, it becomes biannual. For trucks, after registration, an annual inspection is required; after ten years, it becomes biannual. 2. Consequences of not undergoing annual inspection: If a vehicle is found by traffic police on the road without an annual inspection, the owner may be fined or the vehicle may be impounded. Additionally, in insurance contracts, vehicles that have not undergone timely annual inspections are considered unqualified, and no claims will be paid in the event of an accident.

Was this review help?
3
3
Share
DiSarah
09/08/25 7:54am

Last year, I drove to the vehicle inspection station myself and brought all the necessary documents, including the original ID card. The staff must verify the vehicle owner's identity; if you don't bring it, they might refuse the inspection, making the trip pointless. The entire process requires the owner to be present for verification so that the inspection record is valid. I also brought the vehicle registration certificate and a copy of the compulsory insurance policy to avoid unnecessary back-and-forth. It's advisable for owners to prepare a small folder for documents beforehand and arrive early on the inspection day to avoid long queues. If you forget something, you’ll have to go back home to get it or reschedule. Additionally, if the car is borrowed or registered under someone else’s name, the owner must accompany you to provide proof. In short, an ID card is essential—don’t overlook this detail, as it ensures everything proceeds legally and smoothly.

Was this review help?
14
5
Share
Expand All
Espírito Santo
10/22/25 8:01am

From my experience in handling vehicle affairs, it is absolutely necessary to bring the original ID card of the vehicle owner during the inspection. This is a core step in the inspection process to verify the match between the owner's identity and vehicle ownership. If the owner cannot go in person and entrusts a friend to handle it, in addition to the authorization letter, a copy of your ID card and the original ID of the agent must also be provided. Rules vary slightly in different regions, but the basic requirements are the same. By the way, it's also important to check if the car lights and brakes are functioning properly, otherwise, even with all the documents, the inspection may not pass. I recommend that owners organize a checklist of all required documents a week before the inspection to avoid forgetting anything. The whole process may seem simple, but the ID card is the cornerstone—without it, there may be delays or even rejection of the inspection.

Was this review help?
9
5
Share
Expand All
BarrettMarie
12/05/25 8:25am

It was my first time getting the car inspected, and I felt a bit nervous. My friend told me I needed to bring my ID card. Turns out, it was indeed mandatory—the staff scanned it to confirm my name and vehicle details. Without it, they might have refused the inspection on the spot or asked me to reschedule. I also brought the vehicle registration certificate and a copy of the insurance policy, and the whole process took about half an hour. As a newbie, here’s an important tip—having all the required documents is key. Going when the inspection station isn’t crowded saves time, and don’t forget to check the location and operating hours in advance. In short, bringing your ID card ensures everything goes smoothly.

Was this review help?
17
1
Share
Expand All
More Forum Discussions

What are the principles for handling emergency situations on highways?

People first, prioritize avoiding people over objects. Precautions for high-speed driving: 1. Slow down and prepare to brake: Due to the high speeds of vehicles on highways, the time for drivers to react and handle problems is extremely short, especially in areas with blind spots. Many accidents occur for this reason. Therefore, when encountering blind spots while driving at high speeds, always remember to slow down and prepare to brake. 2. Occupying the emergency lane: If you illegally occupy the emergency lane on a highway or urban expressway, you will be penalized with 6 demerit points, and in most areas, an additional fine of 200 yuan. If a fire rescue vehicle is obstructed by a normally driving vehicle in the emergency lane while performing a task, it is not just a simple violation but could lead to more severe consequences due to delayed rescue efforts.
7
0
Share

Are the front and rear brake pads of the Chevrolet Cruze the same?

No, the front and rear brake pads of the Chevrolet Cruze are different. Car brake pads, also known as brake linings, are friction materials fixed to the brake drums or discs that rotate with the wheels. The friction linings and blocks bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. The method for replacing brake pads is as follows: 1. Prepare the new brake pads and remove the wheel where the brake is located. 2. Use a wrench and socket to remove the bolts of the brake caliper, then take out the old brake pads (if there is a brake sensor line, remove it first). 3. Use a piston press pump to push the piston to its limit, then install the new brake pads onto the caliper. After installing the new brake pads in place (also reconnect the brake sensor line if present), tighten the guide bolts to complete the installation.
10
5
Share

What to Prepare for a Test Drive?

Generally, test drivers need to hold a motor vehicle driver's license and have at least one year of driving experience to participate in a test drive. Test driving is an essential step when purchasing a car, so it's necessary to schedule an appointment with the 4S store staff in advance to avoid wasting time if a test drive is not available upon arrival. Introduction to Signing the Test Drive Agreement: It is required to sign a test drive agreement with the customer to clarify the responsibilities during the test drive, especially confirming the compensation issues in case of a traffic accident. Introduction to Checking the Driver's License: The driver's license must be checked and photocopied for record-keeping. Introduction to Filling Out the Information Registration Form: Customers are also required to fill out a test drive customer information registration form for follow-up and feedback purposes.
4
5
Share

How to Open the Hood of a Chevrolet Car?

Method to open the hood of a Chevrolet car: Locate a lever below the left side of the steering wheel with a hood emblem, pull it firmly, then find the release lever under the middle of the front hood and press it to open the hood. Chevrolet is an automobile brand under the General Motors Group, primarily producing SUVs and sedans. Key models under Chevrolet include the Cruze, Malibu XL, Malibu, Orlando, Cruze Hatchback, Cavalier, and Sail 3. Taking the Chevrolet Cruze as an example, it is positioned as a compact car with body dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. In terms of exterior design, the Cruze features the family-style large grille, with angular headlights on the full front end that appear very bold. The strongly lined engine cover and integrated bumper, along with slightly exaggerated design elements, give the Cruze a passionate and youthful appearance.
1
4
Share

Can Boiling Water Remove Urea Crystals?

Boiling water can remove urea crystals. Whether it's urea crystals inside the urea system or in the exhaust pipe, boiling water can be used to dissolve them. First, remove the injector nozzle from the urea system, then soak it in hot water at around 80 degrees Celsius to dissolve the urea crystals blocking the nozzle. It's also important to clean the urea tank regularly, as sediment often accumulates at the bottom, which can affect the smooth operation of the urea injector. If the urea crystallization in the exhaust pipe is not severe, pouring 80-degree Celsius hot water into the pipe can dissolve the crystals. For larger crystal deposits, the rear section of the exhaust pipe may need to be removed for repair. To prevent urea crystallization in the exhaust pipe, measures such as insulating the outer wall of the pipe, increasing the urea injection temperature, and adjusting driving habits can be effective. Urea crystallization in the exhaust pipe is more common in winter due to the significant temperature difference between the inside and outside of the pipe, leading to wet wall phenomena inside the pipe.
2
0
Share

What brand of engine oil does the Atenza use?

Atenza uses Mobil 5W30 engine oil. The '5' indicates resistance to external low temperatures down to -30 degrees Celsius, 'W' stands for winter suitability, and '30' represents the kinematic viscosity standard of 30 at 100 degrees Celsius. Engine oil is the lubricant used in engines, serving functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. The Atenza is a model under FAW Mazda, with body dimensions of 4870mm in length, 1840mm in width, and 1450mm in height, and a wheelbase of 2830mm. In terms of appearance, the Atenza adopts Mazda's KODO design philosophy, featuring a U-shaped front grille paired with LED headlights for a stronger sporty feel. The Atenza utilizes the SKYACTIV chassis technology, equipped with a high-performance MacPherson strut front suspension and a multi-link independent rear suspension, achieving both weight reduction and enhanced rigidity through structural optimization.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.