Is the motor failure rate of the 2021 C260L still high?

1 Answers
RhettFitz
07/29/25 11:28pm
Based on user reviews and complaints, the failure rate is still within an acceptable range. The Mercedes-Benz C260L performs well in terms of power and fuel economy. Below is a related introduction to the Mercedes-Benz C-Class: 1. Exterior: The Mercedes-Benz C-Class is positioned as a mid-size sedan. The new car's overall exterior design comes in two different styles—one with a large emblem, which looks more sporty and stylish, and another with a small emblem, featuring a grille design that leans more toward a business and steady appearance. Based on current sales, more consumers prefer the large-emblem version, as it is the most commonly seen on the streets. 2. Configuration: The Mercedes-Benz C-Class is a mainstream first-tier luxury brand. The new car's interior design exudes a strong sense of luxury, with a noticeable difference compared to the E-Class. The C-Class features a floating central display screen. The latest model, the 2019 Mercedes-Benz C-Class, has discontinued the C200 variant, with the turbocharged version now being the C260.
Was this review help?
9
2
Share
More Forum Discussions

Does the Jetta VS5 tire pressure monitoring need to be turned on?

Jetta VS5 tire pressure monitoring does not need to be turned on, as it is automatically calculated and operated by the computer. As long as the tire pressure is abnormal and exceeds the standard, the tire pressure warning light will automatically illuminate. Taking the 2020 Jetta VS5 as an example, its body dimensions are: 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a trunk capacity of 482 liters. The 2020 Jetta VS5 features a McPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, and a maximum torque of 250 Nm, paired with a 6-speed automatic transmission.
11
0
Share

Can I pick up the car in full payment without being present?

It is not necessary for the buyer to be present when picking up a fully paid car, as there is no specific procedure for car pickup. Therefore, the 4S dealership does not require the user to be present when delivering the new car. When entrusting someone else to pick up the car on your behalf, you need to provide them with your original ID card and all the necessary documents required for the car purchase. Visually inspect the car body paint: Check for any scratches or wear on the paint. Observe under sufficient sunlight to see if there is any color difference in the paint. Open the car door and push or pull it from several angles to let light shine from different directions to check if the sheet metal is even. Check the vehicle identification plate: The car's identification plate is located on the side of the driver's seat door or inside the engine compartment. Pay attention to the manufacturing date of the vehicle; generally, if it exceeds half a year, it can be considered as stock inventory. Check each piece of glass: Also check the production date of each tire to ensure that no replacements have been made after the vehicle left the factory. Check if the tire tread hairs are present and if there are any obvious signs of wear. Inspect the engine compartment: Check if the engine compartment is clean. If the vehicle has been stored for a long time or has been used, there may be noticeable dust or stains in certain areas.
1
1
Share

How to Check if the Battery is Good or Bad?

Check if the battery is good or bad by following these methods: 1. Observe the inspection window—green indicates sufficient charge, black means slightly discharged, and white indicates the battery is dead and needs replacement; 2. Use a battery tester or multimeter to measure the battery voltage. Normally, the no-load voltage should be around 13V, the load voltage should not drop below 12V, and the starting voltage should not be lower than 9.5V; 3. Check if there is noticeable swelling, deformation, or bulging on both sides of the battery; 4. Look for any white or green powdery substances around the battery terminals, which are signs of oxidation. High-quality or new batteries usually do not develop these oxides easily. If they appear, it means the battery's performance is starting to deteriorate.
19
5
Share

What is the reason why the Jaguar XEL sunroof cannot be closed with one touch?

The reasons why the Jaguar XEL sunroof cannot be closed with one touch are: 1. Lack of lubrication in the sunroof track, causing the sunroof seal to stick to the body; 2. Foreign objects in the sunroof slot; 3. Damage to the sunroof motor. The functions of the sunroof are: 1. Releasing toxic gases inside the vehicle; 2. Preventing car exhaust fumes; 3. Reducing the interior temperature; 4. Effectively reducing wind noise; 5. Eliminating fog. Taking the 2020 Jaguar XEL as an example, it belongs to the mid-size car category, with body dimensions of: length 4778mm, width 1850mm, height 1429mm, a wheelbase of 2935mm, a fuel tank capacity of 62 liters, and a curb weight of 1730kg.
10
5
Share

What are the differences between the Lynk & Co 02 Yao Edition and Jin Edition?

The differences between the Lynk & Co 02 Yao Edition and Jin Edition lie in the seat materials: the Yao Edition features genuine leather seats, while the Jin Edition combines genuine leather with suede material. Both the Yao Edition and Jin Edition share the same 5-door, 5-seat SUV body structure, with identical dimensions: length 4448mm, width 1890mm, height 1528mm, and a wheelbase of 2702mm. Both models are equipped with MacPherson independent front suspension and multi-link independent rear suspension. They are powered by a 1.5L turbocharged engine, delivering a maximum horsepower of 180PS, maximum power of 132kW, and maximum torque of 265Nm.
5
3
Share

How to Avoid Shifting from Third Gear to First Gear by Mistake

Before shifting gears, first return the gear lever to neutral, then engage the corresponding gear. Here are some additional tips: 1. When parking normally with an automatic transmission, shift into P (Park). Most automatic transmissions follow the gear sequence "P, R, N, D". You should first shift from P to N (Neutral), then start the engine, release the handbrake, shift into D (Drive), and press the accelerator to drive forward normally. 2. If you start the engine directly and then shift from P through multiple gears to D in one motion, it will frequently cause impact damage to transmission components.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.