Is the Mercedes-Benz C260 domestically produced or imported?

1 Answers
ArielLee
07/29/25 10:29pm
The four-door sedan version of the Mercedes-Benz C260 is domestically produced, while the coupe or station wagon versions are imported. The imported C260 only comes in coupe and station wagon variants, whereas the domestically produced C260 is exclusively available as a four-door sedan. The Mercedes-Benz C is a B-segment sedan under the Mercedes-Benz brand, with both domestic and imported versions using identical powertrain specifications. As one of Mercedes-Benz's younger model series, the C-Class offers a comprehensive lineup equipped with active safety systems, intelligent lighting systems, preventive safety systems, passenger protection systems, and rescue tools, making it exceptionally comfortable, refined, practical, and top-tier in safety.
Was this review help?
1
2
Share
More Forum Discussions

What is the difference between cruise control and ACC adaptive cruise control?

1. Speed adjustment: ACC adaptive cruise control allows the vehicle's cruise control system to adjust speed according to traffic conditions, while traditional cruise control only maintains a constant speed. 2. Intelligence: ACC adaptive cruise is intelligent and can control vehicle speed via sensors. Traditional cruise control is mechanical and requires braking to adjust speed. 3. Availability: ACC adaptive cruise is typically only available in high-end vehicles, such as luxury brands like Mercedes-Benz and BMW; mid-range models usually only feature traditional cruise control.
7
3
Share

What is the displacement of the 2JZ?

2JZ is an engine produced by Toyota with a displacement of 3.0 liters. The specific configurations are as follows: 1. 1JZ and 2JZ are two engine codes developed by Toyota, named 1JZ-GTE VVT-i and 2JZ-GTE respectively. The biggest differences between them are the number of turbos and the displacement. The 1JZ is a single-turbo 2.5-liter engine, while the 2JZ is a twin-turbo 3.0-liter engine. 2. The 2JZ was launched in 1991, weighing 230 kg, featuring an inline 6-cylinder configuration with a 3.0-liter displacement and a compression ratio of 8.5:1. In terms of power, it was further improved compared to the 1JZ, delivering a maximum horsepower of 280 hp and a maximum torque of 433 N·m in stock condition.
2
5
Share

How to Use Mercedes-Benz Keyless Entry?

Mercedes-Benz keyless entry usage: After the system detects the key, the car system will automatically unlock within approximately 1.5 meters, allowing you to open the door and enter the vehicle. You can then directly start the car engine inside. Below is an introduction about Mercedes-Benz cars: 1. Introduction: Mercedes-Benz, a German luxury car brand, is the inventor of the automobile and is considered one of the most successful premium car brands in the world. 2. Brand: In October 2020, Interbrand ranked it eighth in the list of the world's top 100 brands.
13
4
Share

How Often Does the Luzun Need Maintenance?

The new Luzun vehicle requires its first maintenance within 6 months or 5,000 kilometers (whichever comes first), with the first service being free of charge. This includes changing the engine oil, oil filter, and transmission fluid, along with a comprehensive inspection of all vehicle components. Subsequent maintenance should be performed every 5,000 kilometers. Below is an introduction to the Luzun's maintenance schedule: 1. After driving 5,000 kilometers, the engine oil and oil filter need to be replaced; at 10,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter. 2. At 15,000 kilometers, replace the engine oil, oil filter, and cabin air filter; at 25,000 kilometers, replace the engine oil and oil filter. 3. At 20,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter; at 30,000 kilometers, replace the engine oil, oil filter, air filter, cabin air filter, and fuel filter. 4. At 35,000 kilometers, replace the engine oil and oil filter; at 40,000 kilometers, replace the engine oil, oil filter, air filter, fuel filter, brake fluid, and power steering fluid. 5. At 45,000 kilometers, replace the engine oil, oil filter, and cabin air filter; at 50,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter. 6. At 55,000 kilometers, replace the engine oil and oil filter; at 60,000 kilometers, replace the engine oil, oil filter, air filter, cabin air filter, and fuel filter. 7. The fuel filter and air filter should be replaced every 10,000 kilometers, and the cabin air filter should be replaced annually or approximately every 20,000 kilometers.
18
5
Share

What brand is the ltwoo transmission?

ltwoo transmission is a blueprint transmission, produced by Zhuhai Blueprint Controller Technology Co., Ltd. The relevant introduction is as follows: 1. Through continuous independent innovation, Blueprint has developed the AT1, AX, A7, A5, and A3 series of transmissions, with key products including 11-speed, 10-speed, 9-speed, 8-speed, 7-speed, and 6-speed kits. 2. Blueprint is dedicated to the research and production of mountain bike/civilian bicycle kits. Blueprint is gradually expanding its layout in high-end products and road bike products, focusing on Asian ergonomics during development to provide good feel and accuracy at a relatively low price.
19
5
Share

Principle of Silicone Oil Fan Clutch

The working principle of the silicone oil fan clutch is relatively simple. This type of clutch uses silicone oil as the medium. When the temperature is low, the silicone oil does not flow, and the fan clutch disengages. When the temperature is high, the viscosity of the silicone oil causes the fan clutch to engage, allowing the fan to rotate. Below is a related introduction to the silicone oil fan clutch: 1. When the engine load increases and the coolant temperature rises, the temperature of the airflow passing through the radiator core also increases. The high-temperature airflow blows on the bimetallic temperature sensor, causing the bimetallic strip to deform due to heat, which drives the valve plate transmission pin and control valve plate to deflect at an angle. 2. When the temperature of the airflow blowing on the bimetallic temperature sensor drops below 35°C due to reduced engine load or other reasons, the control valve plate closes the oil inlet hole, and silicone oil no longer enters the working chamber. The silicone oil originally in the working chamber continues to return to the oil storage chamber under centrifugal force until it is completely drained. At this point, the clutch is disengaged again, and the fan idles and slips.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.