Is the Mazda6 Ruiyi produced by Changan Mazda or FAW Mazda?

1 Answers
LaAbigail
07/29/25 8:39pm
The Mazda6 Ruiyi is produced by FAW Mazda. The Ruiyi is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. The 2.0-liter naturally aspirated engine has a maximum power of 108 kW, a maximum torque of 184 Nm, a maximum power speed of 6,500 rpm, and a maximum torque speed of 4,000 rpm. The 2.5-liter naturally aspirated engine has a maximum power of 124 kW, a maximum torque of 226 Nm, a maximum power speed of 6,000 rpm, and a maximum torque speed of 4,000 rpm. Both engines are equipped with multi-point electronic fuel injection technology, use aluminum alloy cylinder heads and blocks, and are paired with a 5-speed automatic transmission.
Was this review help?
9
2
Share
More Forum Discussions

Can You Buy a Car in Stock at a 4S Store?

4S stores have cars in stock that can be purchased, but it is not recommended to pick up the car on the same day. The reasons are as follows: 1. Tight pickup time: Since 4S stores usually start receiving customers after 9 or 10 in the morning, and customers generally arrive at the 4S store relatively late, the time available to complete the purchase and pickup on the same day becomes very limited. This can easily lead to negligence in processes such as vehicle inspection and paperwork, and sometimes carelessness may result in serious consequences. 2. Car insurance not yet effective: Due to the effective period of car insurance, generally, the insurance purchased on the same day only takes effect at midnight the next day. Therefore, if a customer picks up the car on the same day of purchase and the vehicle is involved in a scratch or accident, all losses will have to be borne by the customer themselves.
11
2
Share

Where to Obtain the Vehicle Inspection Exemption Label?

Vehicle inspection exemption labels can be applied for at the local vehicle management office without any fees. The vehicle owner must personally bring relevant documents, including the vehicle's driving license (original and copy), the ID card of the vehicle owner, the compulsory traffic insurance policy, and the tax payment or tax exemption certificate for vehicle and vessel tax. Here are the relevant details: 1. Definition of Vehicle Inspection Exemption: Vehicle inspection exemption means that for vehicles meeting the exemption conditions within 6 years, the on-site inspection process is waived. Owners only need to apply for the inspection label every two years and affix it to the vehicle as required. 2. Types of Vehicles Not Eligible for Inspection Exemption: ① Vehicles involved in accidents during this period, i.e., new vehicles involved in fatal accidents within 6 years, are not eligible for the exemption policy. ② Vans (referring to vehicles with 7 or more seats). ③ Vehicles that have not been registered for a long time after purchase are not eligible for exemption. For vehicles that have not been registered for more than 4 years since the date of manufacture, the original inspection rules apply, and they are not eligible for the exemption policy (still requiring inspection every 2 years within 6 years).
1
3
Share

How Often Should Used Cars Undergo Inspection?

Vehicle inspections should be calculated from the date of initial registration, with specific requirements as follows: 1. Passenger vehicles for commercial use: Within the first 5 years, inspect once annually; after exceeding 5 years, inspect every 6 months. 2. Trucks and large/medium-sized non-commercial passenger vehicles: Within the first 10 years, inspect once annually; after exceeding 10 years, inspect every 6 months. 3. Small and mini non-commercial passenger vehicles: Within the first 6 years, inspect once every 2 years; after exceeding 6 years, inspect once annually; after exceeding 15 years, inspect every 6 months.
16
0
Share

What does the low engine oil indicator look like?

The low engine oil warning light: Its shape resembles a teapot with a drop of liquid dripping down. When the engine oil replenishment indicator lights up, you should immediately take your car to a 4S shop for inspection and should not continue driving. Otherwise, it will accelerate engine wear and may cause irreversible damage to the engine itself. Here are some related details: 1. Engine oil filling standard: Engine oil should generally be filled to slightly above the middle point between the minimum and maximum marks on the dipstick, never exceeding the maximum or falling below the minimum mark. Exceeding the maximum mark will increase the rotational resistance of the engine crankshaft and affect performance, while falling below the minimum mark will prevent adequate lubrication protection for internal engine components. 2. Engine oil replacement cycle: Different manufacturers have varying requirements for oil change intervals. Generally, engine oil should be checked and replaced at a 4S shop every 5,000 kilometers/6 months. If you use fully synthetic oil, it can be replaced every 8,000 kilometers.
4
1
Share

Does the BMW M series have a station wagon?

BMW's M series does not have a station wagon. Here is more information about the BMW M series: 1. Design philosophy: High performance with racing characteristics. 2. Maintenance knowledge: The 2013 BMW M6 has a whole vehicle warranty of two years with unlimited mileage, and the maintenance cycle is as follows: first maintenance at 10,000 kilometers or 6 months. Second maintenance at 20,000 kilometers or 12 months. Maintenance interval: 10,000 kilometers or 6 months. It is recommended to perform a major maintenance after the vehicle has traveled 60,000 kilometers, which includes replacing the engine oil, oil filter, air filter, cabin air filter, fuel filter, brake fluid, and transmission oil.
3
4
Share

Is the Environmental Protection Label Still Required?

Environmental protection labels are no longer required. Below is a partial introduction to emission standards: 1. Definition: These are national regulations that set limits on the concentration or total amount of pollutants discharged into the environment by artificial pollution sources. General pollutant emission standards specify the allowable discharge amounts for various pollutants that are widespread or particularly harmful within a certain area (nationwide or regional), applicable to all industries. Some general emission standards specify allowable discharge amounts based on different discharge directions (e.g., water pollutants discharged into sewers, rivers, lakes, or seas). 2. Overview: Emission standards refer to the harmful gases discharged from vehicle exhaust, including carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, soot, etc. 3. Reason: On July 25, 2016, the Ministry of Environmental Protection, the Ministry of Public Security, and the National Certification and Accreditation Administration jointly issued the "Notice on Further Standardizing Emission Inspections and Strengthening Environmental Supervision and Management of Motor Vehicles" (National Environmental Regulation Atmosphere [2016] No. 2), which clearly states that "environmental protection departments will no longer issue motor vehicle environmental protection inspection compliance labels."
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.