Is the make-up test for Subject 1 on the same day?

What to Do If You Fail to Handle a 12-Point Deduction on Your Driver's License Within 15 Days?

If a driver's license accumulates 12 points within one year or in a single instance, the driver must report to the traffic police department within 15 days for processing. The driver needs to take the study permit issued by the traffic police department to the local vehicle management office to complete the study procedures. After studying for 7 days, the driver must take the subject one exam at the driving school designated by the vehicle management office. Upon passing the exam, the driver can take the qualification notice to the traffic police department to retrieve their license. The deducted points will be cleared, allowing the driver to legally drive again. If the driver fails to report within 15 days, the traffic police department will announce the revocation of the license online, leading to immediate suspension. Once revoked, the driver's license cannot be reinstated. The driver must reapply for a new license, but only after meeting the required waiting period specified at the time of revocation. The conditions for reapplication vary depending on the circumstances.

8

0

Share

What Are the Possible Reasons When Both Low Beam Lights of a Car Don't Work?

The reasons why both low beam lights don't work may include bulb damage, blown fuse, relay failure, or issues with the low beam light circuit. Below are the solutions for non-functioning low beam lights and precautions for using low beam lights: Solutions for non-functioning low beam lights: If the problem lies with the bulb, simply replace it. If the bulb is fine, proceed to check the fuse and relay, and finally inspect the circuit and headlight assembly. A blown fuse is a common issue, and it's advisable to visit a 4S shop or professional auto repair shop for inspection. Precautions for using low beam lights: Low beam lights must be turned on when driving at night in areas without streetlights, during dusk when visibility is low, or at dawn. Additionally, in conditions of heavy fog, snow, or rainstorms where visibility is significantly reduced, low beam lights should also be used during the day for traffic safety.

14

0

Share

Is the Corolla 1.2T engine durable?

Overall, the new Corolla 1.2T engine proves to be quite durable. However, it's still too early to draw conclusions about its long-term performance since the 1.2T Corolla has only been on the market for about four years. That said, these four years have largely demonstrated that the Corolla's engine does possess good durability. 1. Exterior design: Centered around the Toyota emblem, the front grille and headlights extend to both sides with a slight upward tilt, fully embodying Toyota's Keen Look family design language that delivers a striking and sharp appearance. To meet Chinese consumers' demand for space, the new Corolla's wheelbase has been extended to 2700mm, with rear legroom increased by 75mm to 960mm. 2. Powertrain: The 8-speed S-CVT Super Intelligent Continuously Variable Transmission provides smooth shifting for an enjoyable driving experience while achieving greater breakthroughs in fuel efficiency. The SPORT mode responds instantly, allowing seamless control between stability and agility for an unprecedented driving experience.

10

4

Share

What is the difference between DL250-A and DL250-C?

Here are the differences between DL250-A and DL250-C: 1. Different vehicle positioning: DL250-A is an entry-level adventure bike; DL250-C is a more conventional standard motorcycle. 2. Different ground clearance: DL250-A has a minimum ground clearance of 160mm; DL250-C has a minimum ground clearance of 155mm. Here is additional information: 1. Brand affiliation: DL250 is a model under the Haojue-Suzuki brand. 2. Dimensions: Both DL250-A and DL250-C measure 2240mm in length, 905mm in width, and 1340mm in height, with a wheelbase of 1430mm. 3. Powertrain: The power system adopts a twin-cylinder water-cooled four-stroke engine, with a maximum power of 18.4kW and maximum torque of 23.4Nm.

5

0

Share

What is the solution for the jerky start of the Audi A6L?

Audi A6L jerky start should be solved by cleaning the throttle body in time. The following is a detailed introduction to the Audi A6L: 1. Power: It adopts the new 839 + dual-clutch transmission. It is more comfort-oriented. It has low fuel consumption, with a combined fuel consumption of 8.2L/100km. The new Audi A6L 3.0TFSI comes standard with adjustable air suspension. This leading configuration, unique among models in the same class, allows the driver to adjust the characteristics of the chassis system according to driving speed and road conditions, thereby meeting the needs of different driving styles. 2. Handling: The operation is simple, and gear shifting is particularly smooth. The car's own chassis is solid, capable of handling various road conditions. The body stability is strong, with minimal body roll during turns. It can reach high speeds on highways and has excellent off-road performance with strong off-road capability. The space is large, eliminating any sense of crowding.

3

Share

What is the appropriate distance for low beam headlights to illuminate?

Low beam headlights generally illuminate a distance of 30-40 meters, which is considered appropriate. Experiments have shown that when driving at 55 km/h at night, the braking distance is exactly 30 meters upon immediate reaction. This means that if an obstacle is detected within the low beam illumination range and the vehicle stops immediately, there will be no gap between the vehicle and the object. Therefore, illuminating 30-40 meters is suitable. Precautions for using high and low beam headlights are as follows: Precautions for using high beam headlights: When using high beams, it is important to be aware of oncoming vehicles. When the distance to an oncoming vehicle is about 50 meters, the high beams should be switched to low beams. This is because high beams are too bright and can cause glare, which may impair the driver's vision and affect driving safety. Precautions for using low beam headlights: Low beams must be turned on when driving at night in areas without streetlights, during dusk when visibility is low, or at dawn when light is just appearing. Additionally, in conditions such as heavy fog, snow, or rainstorms where visibility is significantly reduced, low beams should be used even during the day to ensure traffic safety.

10

2

Share

Is the make-up test for Subject 1 on the same day?

What to Do If You Fail to Handle a 12-Point Deduction on Your Driver's License Within 15 Days?

What Are the Possible Reasons When Both Low Beam Lights of a Car Don't Work?

Is the Corolla 1.2T engine durable?

What is the difference between DL250-A and DL250-C?

What is the solution for the jerky start of the Audi A6L?

What is the appropriate distance for low beam headlights to illuminate?

Why Was the Changan Lingxuan Discontinued?

How to Automatically Fold the Mirrors on an Audi A4L?

What is the appropriate tire pressure for the Buick LaCrosse?

How often should the transmission fluid in a car be replaced?