Is the highway toll-free during the Mid-Autumn Festival holiday?

1 Answers
Harold
07/30/25 8:07am
Toll applies. Below is a partial introduction about toll-free highway holidays: 1. Scope of implementation: The toll-free periods cover four national statutory holidays - Spring Festival, Tomb-Sweeping Day, Labor Day, and National Day - as well as the consecutive rest days for these holidays as determined by documents from the General Office of the State Council in that year. 2. Implementation period: The free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday (for ordinary roads, the time is based on when the vehicle passes through the toll lane of the toll station; for highways, the time is based on when the vehicle exits the toll lane at the exit).
Was this review help?
4
1
Share
More Forum Discussions

What does the DS gear in an automatic transmission car mean?

Automatic transmission cars usually display DS gear as D/S, which means switching between D gear or S gear. D gear is the drive gear, and S gear represents the sport mode. The specific introduction is as follows: D gear: D gear is the drive gear, also known as the driving gear, which is the abbreviation of Drive. When the gear lever is moved into this position, the transmission automatically shifts gears within the engine speed range, and the shift point depends on the engine load, the driver's driving style, and the vehicle speed. S gear: S gear represents the sport mode. When this gear is engaged, the gear can be freely switched, but the shift timing is delayed, keeping the engine at high speed for a period of time to increase the car's power.
11
1
Share

How often should the timing belt of Nissan X-Trail be replaced?

The timing belt of Nissan X-Trail needs to be replaced every 100,000 kilometers. The main function of the timing belt in Nissan X-Trail's engine is to drive the engine's valve train, ensuring that the intake and exhaust valves open and close at the appropriate times to allow normal air intake and exhaust in the engine cylinders. The Nissan X-Trail is a compact SUV equipped with a 2.0L 151 horsepower L4 engine and a CVT continuously variable transmission (simulating seven gears). The engine has a maximum power output of 111kW and a maximum torque of 194Nm. The Nissan X-Trail features a naturally aspirated intake system, with a top speed of 183km/h and a minimum ground clearance of 208mm.
10
1
Share

Which One is the Accelerator and Which One is the Brake?

The rightmost pedal is the accelerator pedal, and the one to its left is the brake pedal. Below are the positions and design purposes of these two pedals: How to Identify the Accelerator and Brake Positions: In automatic transmission vehicles, the accelerator and brake are easier to identify. There are only two pedals located below the driver's console, arranged from left to right as the brake pedal and the accelerator pedal, both controlled by the right foot. Design Purpose of the Accelerator and Brake: Based on ergonomics, the pedals are designed to allow drivers to react quickly in emergencies. To prevent confusion between the accelerator and brake while driving an automatic vehicle, manufacturers design the accelerator pedal to be lower and the brake pedal relatively higher. This helps avoid mistakenly pressing the accelerator instead of the brake during driving, thereby preventing potential hazards.
12
5
Share

What is the fuel consumption of the Wrangler 2.0t?

2022 Wrangler 2.0t fuel consumption is 9L per 100 kilometers. The following are the methods to reduce fuel consumption and the introduction of influencing factors: Methods to reduce fuel consumption: You can add fuel additives to the fuel tank to improve combustion and remove carbon deposits. It is recommended to regularly inspect and maintain the vehicle, clean or replace the three filters, which will reduce fuel consumption. At the same time, the longer the idling time when parked, the greater the fuel consumption, so try to minimize idling time; and avoid sudden acceleration, stepping hard on the throttle, and driving at low RPMs. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, will all affect the vehicle's fuel consumption.
17
0
Share

What Causes the Screeching Sound When Braking?

Brake screeching may be caused by variations in the hardness of the brake discs, leading to uneven wear and resulting noise. If the issue is due to hard spots, the simplest method is to drive in reverse at about 5 km/h and apply the brakes several times to eliminate the hard spots. More information about brakes is as follows: 1. The braking performance of a vehicle is ultimately determined by the brake pads, so maintaining the good condition of the brake pads is the most direct maintenance method for the braking system. Both brake pads and brake discs (drums) have a service life and must be replaced when they wear down to a certain extent. 2. If the car noticeably pulls to the left or right when braking, this is due to asynchronous braking of the front wheels, which can easily lead to accidents due to uneven braking force, especially at high speeds. Immediate adjustment at a repair shop is necessary.
1
0
Share

What Causes Car Vibration?

Car vibration during startup can be caused by severe carbon buildup, ignition system malfunctions, or fuel pressure issues. The details are as follows: Severe Engine Carbon Buildup: Engine carbon buildup is the primary cause of car vibration. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the fuel injector during a cold start is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture and making the car prone to vibration during cold starts. Ignition System Malfunction: Excessive carbon buildup on the spark plugs or overly large ignition gaps can lead to ignition failure. Fuel Pressure Issues: Abnormal fuel pump pressure or incorrect readings from the intake pressure sensor can cause the fuel pump to operate poorly, leading to car vibration.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.