Is the highest point of the wiper in the middle of the car?

1 Answers
IvanAnn
07/29/25 5:04pm
The highest point is at the far right of the front windshield. The function of the wiper is to remove raindrops and dust attached to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. The technical name for the wiper is 'windshield wiper,' which refers to the blade structure installed in front of the windshield. It consists of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Its main purpose is to clear rain, snow, and dust that obstruct the view on the windshield. The types of wipers are as follows: 1. Traditional intermittent wipers: These are the most common wipers, with three to four segments, allowing the driver to adjust according to the intensity of rain and visibility conditions. 2. Rain-sensing wipers: These have been increasingly used in mid-to-high-end models in recent years. A good wiper must have characteristics such as heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, the ability to fit the windshield, reduce the burden on the motor, low noise, strong water repellency, and soft material to avoid scratching the windshield, ensuring clear vision.
Was this review help?
9
2
Share
More Forum Discussions

What is the correct procedure for starting a manual transmission car?

The correct procedure for starting a manual transmission car is: 1. Before ignition, ensure the gear is in neutral; 2. Press the clutch, turn the key to the ACC position, hold for about 3 to 5 seconds to allow the car's circuits to complete self-inspection, then turn to the START position for ignition; 3. After successful ignition, promptly release the key, allowing it to return to the ON position. Manual transmission, also known as a manual gearbox, is a type of transmission device used to alter the speed and torque transmitted from the engine to the drive wheels. It enables the car to achieve different traction and speed under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range.
12
5
Share

What is the displacement of the polo180?

polo180 has a displacement of 1.6L, where 180 refers to the engine torque. Torque levels: Currently, Volkswagen categorizes the torque levels on the tail badges into five grades: 180, 230, 280, 330, and 380. Polo: The Polo is an economical car launched by Shanghai Volkswagen, featuring a stylish and dynamic appearance, a relatively heavy body, and good safety. The Polo offers superior handling performance compared to vehicles in the same class, maintaining excellent stability and maneuverability whether at high speeds or navigating through urban areas at low speeds. There is no noticeable feeling of instability at high speeds, with steering remaining precise, and acceleration and deceleration at low speeds are smooth and effortless.
15
2
Share

What letter represents the drive gear?

Drive gear is represented by the letter D. In D gear, the transmission automatically shifts between 1st gear and overdrive based on speed and throttle conditions. This gear is used for normal road driving. Due to different designs among vehicle models in various countries, D gear may include shifts from 1st gear to high gear or from 2nd gear to high gear, and it automatically shifts gears according to changes in speed and load. In D gear, the driver only needs to control the accelerator pedal to adjust the vehicle speed. When driving normally, place the gear selector in the D position, and the car will automatically shift between 1st to 4th gear (or 3rd gear). Automatic transmission vehicles also have N, P, R, and L gears: N stands for neutral; P stands for parking; R stands for reverse; L stands for low gear.
13
4
Share

How many liters is the Mazda6 fuel tank?

The fuel tank capacity of the Mazda6 is approximately 60 liters. Here is more information: Body parameters: The Mazda6 is a mid-size car launched by Mazda, with a body length, width, and height of 4670 mm, 1780 mm, and 1435 mm respectively, a wheelbase of 2675 mm, and a curb weight of 1386 kg. Power: The Mazda6 is equipped with a 2.0L inline 4-cylinder naturally aspirated engine, with a maximum power of 108 kW, a maximum power speed of 6500 rpm, and a maximum torque speed of 4000 rpm.
4
1
Share

What are the reputation and fuel consumption of Changan Oshan X5?

Oshan X5 models with 1.5T turbocharged engines have a combined fuel consumption of 6.2 liters per 100 kilometers as certified by the Ministry of Industry and Information Technology (MIIT), while the MIIT-certified combined fuel consumption for all models is 6.3 liters per 100 kilometers. Below are additional details: Body Design: The Changan Oshan X5 features a high-strength steel ring-shaped body design, with high-strength steel accounting for 78% of the structure. It includes DMS (Driver Monitoring System), LDW, ACC, AEB, ESP, ABS, EBD, BAS, TCS, ultra-high-definition surround-view dashcam, cloud-eye rearview mirror, 360° panoramic imaging, and bodyguard mode. Smart Features: The Changan Oshan X5 is equipped with the Onstyle 3.0 intelligent ecosystem, developed with a people-oriented and meticulous care philosophy to meet the needs and characteristics of modern young people's car life. It offers a fast, smart, simple, and enjoyable new experience, along with FOTA (Firmware Over-The-Air) whole-vehicle self-upgrading functionality, ensuring that companionship is always fresh.
2
1
Share

What is the fuel tank capacity of the 12th-generation Crown?

The fuel tank capacity of the 12th-generation Crown (2005 model) is 70 liters, as officially announced by FAW Toyota. The 12th-generation Crown requires 95-octane gasoline, with a fuel consumption of 9.4L per 100 kilometers. A full tank can cover a distance of approximately 745km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately displayed on the gauge. The fuel gauge usually has 5 to 6 segments, and it is recommended to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.