Is the Film Provided by 4S Stores Actually Usable?

1 Answers
OCarson
07/28/25 9:49am
4S stores provided film can be used. Most of the films offered by 4S stores are low-cost, inferior quality films. If you are not particularly particular about it, you can accept the film provided by the 4S store. If you have some standards, you might consider paying extra to upgrade to a better film. Some so-called "original factory films" from 4S stores are essentially just a layer of plastic film, offering no heat insulation effect, having a strong odor, exceeding formaldehyde standards, and bubbling up within a few months. Removing such films often leaves behind a lot of difficult-to-remove adhesive. Here are some precautions to take after applying the film: Do not roll down the windows: After applying the car film, avoid rolling down the windows for a week. In most cases, the car film takes 5-7 days to firmly adhere to the windows. During this period, try to minimize rolling down the windows to prevent the film from shifting before it is fully bonded. Do not wipe: Avoid wiping the newly applied film for a week. Newly applied films are prone to fogging, which is a normal phenomenon during the drying process. Such conditions usually appear within a week to half a month and will disappear on their own. Do not attempt to wipe it away. Avoid using sharp or rough tools to scrape: After applying the car film, never use sharp or rough tools to scrape it. If you are not careful and scrape the film with such tools, the transparency of the film will be significantly compromised.
Was this review help?
13
3
Share
More Forum Discussions

How to turn on the air conditioning in Haval F5?

Haval F5 turns on the air conditioning by pressing the air conditioning system start button on the center console. The air conditioning system will then start, the button indicator light will illuminate, and the central screen will display the air conditioning system interface. To adjust the air direction, temperature, and internal/external circulation, simply tap the corresponding touch icons on the screen. Taking the 2020 Haval F5 as an example, it is a compact SUV with body dimensions of 4470mm in length, 1857mm in width, and 1638mm in height, with a wheelbase of 2680mm and a fuel tank capacity of 55 liters. The 2020 Haval F5 features a MacPherson independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, and a maximum torque of 210 Nm, paired with a 6-speed manual transmission.
5
3
Share

Is maintenance required at exactly 5000 kilometers?

Maintenance is required at exactly 5000 kilometers. The first maintenance period for a car is either 5000 kilometers or six months, whichever comes first. Maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The benefits of maintenance include: 1. Ensuring the vehicle is in excellent performance condition; 2. Improving the vehicle's efficiency and reducing the wear and tear of its parts and tires; 3. Enhancing driving safety; 4. Preventing vehicle issues that could lead to hazards; 5. Reducing noise and environmental pollution; 6. Keeping the vehicle's appearance clean and preventing damage.
20
3
Share

Should you use high beams or low beams on highways at night?

High beams should be used on highways at night. When driving on highways, the speed is very fast, and most highways have no street lights, resulting in poor visibility. If high beams are not turned on, it is difficult to see the road conditions ahead in time, which can easily lead to traffic accidents. The method to turn on the car lights is: 1. Turn the left light control switch forward one notch for parking lights; 2. Turn it forward twice for low beams; 3. Push the light control lever forward once for high beams. Situations that require high beams include: 1. Turning on high beams at night when there are no street lights on the roadside or the road is straight and distant with poor visibility; 2. When encountering oncoming traffic at night, if high beams are on, they must be turned off and then turned on again after the oncoming traffic has passed.
7
2
Share

What does China VI correspond to in terms of emission standards?

China VI corresponds to the China 6 standard, which is the National Sixth Stage Emission Standard for motor vehicle pollutants. This standard is established to prevent environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The emission limits under the China 6 standard are: 1. Carbon monoxide (CO) emissions: 700mg; 2. Non-methane hydrocarbon (NMHC) emissions: 68mg; 3. Nitrogen oxides (NOx) emissions: 60mg; 4. Particulate matter (PM) emissions: 4.5mg. Methods to check if a vehicle meets the China 6 standard include: 1. The vehicle's environmental protection compliance label; 2. The page in the vehicle certificate where the identification number begins; 3. Estimating the emission standard based on the vehicle's manufacturing year; 4. Using the original or a copy of the vehicle registration certificate to inquire at the local vehicle management office.
8
3
Share

What is the emergency braking distance at 40 mph in meters?

The braking distance should be between 16.5 meters and 27.5 meters. At a speed of 40 kilometers per hour, it covers more than 11 meters per second. Generally, it takes 3 to 5 seconds from braking to a complete stop, which calculates to 33 meters to 55 meters. Of course, during the braking process, the speed decreases, so considering the deceleration factor and halving the calculation, the braking distance should be between 16.5 meters and 27.5 meters. Below are additional hazards of frequent emergency braking: 1. Increased fuel consumption. 2. Affects tire lifespan and increases wear. 3. Reduces engine lifespan. 4. Decreases the lifespan of the clutch system. 5. Shortens the lifespan of brake pads and brake discs.
6
5
Share

Which region does a license plate starting with 'Gui' belong to?

License plates starting with 'Gui' belong to Guizhou Province. The license plate codes for Guizhou Province are as follows: Gui A is for Guiyang, Gui B is for Liupanshui, Gui C is for Zunyi, Gui D is for Tongren, Gui E is for Qianxinan Buyi and Miao Autonomous Prefecture, Gui F is for Bijie, Gui G is for Anshun, Gui H is for Qiandongnan Miao and Dong Autonomous Prefecture, and Gui J is for Qiannan Buyi and Miao Autonomous Prefecture. The functions of license plates are: 1. To number and register information for each vehicle; 2. To identify the region to which the vehicle belongs; 3. To trace the owner and registration information of the vehicle based on the license plate. Types of license plates: 1. White represents military and police plates; 2. Blue represents ordinary small vehicles with fewer than 7 seats; 3. Yellow represents ordinary large vehicles; 4. Black represents foreign enterprise plates.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.