Is the Delica D5 available at Tianjin Port?

The Difference Between Direct Injection and Multi-Point Electronic Injection

The main differences between direct injection and multi-point electronic injection are as follows: 1. In multi-point electronic injection, the injectors are installed on the intake manifold, where fuel and air begin to mix before entering the cylinder; direct injection sprays fuel directly into the cylinder. 2. Compared to direct injection, multi-point electronic injection has lower requirements for fuel quality; direct injection has more complex components and is more expensive than multi-point electronic injection. 3. Multi-point electronic injection technology is mature and cheaper but consumes more fuel; direct injection has advantages in both performance and fuel consumption. 4. Multi-point electronic injection has higher combustion efficiency and can release more power compared to direct injection of the same displacement.

16

0

Share

How to Protect Your Car from Sun Damage in Summer?

Methods for protecting your car from sun damage in summer are as follows: 1. Leave appropriate window gaps when parking: The excessively high temperature inside the car is due to it being too sealed. Continuous exposure to sunlight will continuously accelerate the temperature inside the car, while the scorching air inside cannot dissipate, leading to an increasingly hotter interior that is much warmer than the outdoor temperature. Leaving a two to three-finger gap in the windows can prevent excessive temperature differences between the inside and outside. 2. Park in the shade: The most direct source of high temperature inside the car is sunlight. Parking in the shade effectively avoids direct sunlight, not only lowering the car's temperature but also reducing paint damage, thereby decreasing the frequency of car maintenance.

20

3

Share

What Causes the Inability to Shift Gears When the Clutch Pedal is Depressed?

The reasons for being unable to shift gears when the clutch pedal is depressed are: 1. The clutch pedal, clutch master cylinder transmission mechanism is disconnected or stuck; 2. The clutch master cylinder is leaking or stuck; 3. There is a pipeline leakage phenomenon; 4. There is a slave cylinder leakage phenomenon or abnormal mechanical transmission phenomenon. The solutions for being unable to shift gears when the clutch pedal is depressed are: 1. Avoid prolonged semi-engagement state; 2. Fully depress the clutch pedal before shifting gears; 3. When emergency braking, simultaneously press the brake and clutch. The clutch is located in the flywheel housing between the engine and the transmission, and the clutch assembly is fixed to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission.

10

3

Share

What is the vision requirement for a driver's license medical examination?

The naked eye vision or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. If the vision test fails, the following solutions are available: 1. Wear glasses. If you know you are nearsighted, you can wear glasses with the appropriate prescription and retake the medical examination, as the driver's license medical examination allows corrected vision and does not require naked eye vision. 2. Corrected vision. For those who cannot meet the naked eye vision requirement for the test, there is no need to be discouraged, as the vision requirement for the driver's license test in China is corrected vision, not naked eye vision. Therefore, when applying for a driver's license, you can promptly visit a professional eye hospital for examination and correction. 3. Retake the medical examination at a hospital. If you fail the vision test at the driving school, you can also take the test at a designated hospital. Generally, the vehicle management office will designate several local hospitals where you can undergo the medical examination. If the examination results are satisfactory, you can bring the medical examination form and relevant payment receipts back to the driving school.

8

1

Share

What are the correct steps for parking an automatic transmission car?

Correct steps for parking an automatic transmission car are as follows: 1. First, drive the car into a safe parking area. After stopping, keep your foot on the brake, shift the gear to N (Neutral), then engage the handbrake. Wait until the handbrake is properly engaged or the electronic parking brake is securely activated before shifting the gear to P (Park). This parking procedure can help reduce the failure rate of the transmission. 2. When starting the car, first press the brake pedal, then start the engine. Shift the gear to Neutral, release the handbrake, and then shift to the desired driving gear (Drive or Reverse). New drivers should always have an experienced driver in the passenger seat to avoid accidents caused by nervousness.

4

3

Share

What car has a logo with two semicircles?

This might be the logo of BYD Auto or NIO. Here is some information about the logos of BYD and NIO: 1. The old version of the BYD logo consists of two semicircles, with the upper semicircle in blue and the lower semicircle in white. The two semicircles are enclosed by a black ring, and "byd" is written below the ring. This was the old BYD logo, which could be seen on the early BYD F3 models. 2. The NIO logo also somewhat resembles two semicircles placed together. NIO is a relatively young car company that specializes in manufacturing pure electric vehicles.

19

1

Share

Is the Delica D5 available at Tianjin Port?

The Difference Between Direct Injection and Multi-Point Electronic Injection

How to Protect Your Car from Sun Damage in Summer?

What Causes the Inability to Shift Gears When the Clutch Pedal is Depressed?

What is the vision requirement for a driver's license medical examination?

What are the correct steps for parking an automatic transmission car?

What car has a logo with two semicircles?

Can the vehicle annual inspection time be postponed?

Does a Newly Replaced Clutch Need a Break-in Period?

What are the precautions for using waterless coolant?

Why is the car air conditioning compressor not starting?