Is the Built-in Fuel Filter Really Unnecessary to Replace?

Will there be more automatic or manual transmission cars in the future?

Automatic transmission cars are becoming increasingly prevalent. Here's an introduction to the gears: 1. 1st Gear: Used for normal starts or when climbing very steep slopes. The speed typically remains around 10 km/h in this gear; 2. 2nd Gear: Acts as a transitional gear for acceleration after starting, or for low-speed driving and steep slope climbing, with speeds usually around 20 km/h; 3. 3rd Gear: Generally used at speeds between 20 km/h and 40 km/h, commonly employed for city driving; 4. 4th Gear: Suitable for speeds ranging from 40 km/h to 60 km/h; 5. 5th Gear: Used for speeds above 60 km/h, typically during high-speed driving; 6. N (Neutral) Gear: Used when the vehicle is idling, such as at traffic lights—shift to N and engage the handbrake; 7. R (Reverse) Gear: The reverse gear, engaged after the vehicle has come to a complete stop for reversing.

18

1

Share

What Causes a Motorcycle to Stall When Throttling Down?

If a scooter stalls when throttling down, it may be caused by an overly rich air-fuel mixture. You can check whether the air filter is oil-soaked or clogged, whether the carburetor's mixture ratio is too rich, or whether the fuel level is too high. Alternatively, immediately reapply the throttle slightly after decelerating from high speed, which usually prevents stalling. Main causes: 1. Unstable idle speed: Stalling when throttling down indicates unstable or excessively low idle speed! If it's too low, it's easy to fix—just adjust it. However, if it's unstable, the issue is more complicated. 2. Prolonged inactivity: If the vehicle hasn't been started for a long time, gasoline can form gum deposits that clog the carburetor's inner walls and jets. Drain the old gasoline and refuel before testing.

6

4

Share

What causes a single clunking sound from the front wheels when starting to turn?

The main reasons for a single clunking sound from the front wheels when starting to turn include: 1. Faults in the steering gear, power steering, or chassis components; 2. Malfunctions in the outer CV joint, shock absorber, or power steering pump; 3. Insufficient or deteriorated power steering fluid; 4. Worn or rusted ball joints; 5. Corrosion of the control arm ball joint. The issues mentioned above can often be resolved by applying lubricant, but there are several types of abnormal noises that require attention: Loose steering tie rod ball joint: This can cause steering wheel vibration, a loose chassis, and premature tire wear, so the steering ball joint should be replaced promptly. Aging or damaged CV joint boot: The engine's power transmission primarily relies on the cooperation of the inner and outer CV joints. The inner CV joint connects to the transmission differential, while the outer CV joint connects to the wheel. Each CV joint is protected by an outer boot, which prevents contaminants from entering and damaging the joint and prevents leakage of CV joint grease. When the protective boot ages or gets damaged, it can lead to CV joint failure, further causing abnormal noises during steering.

19

2

Share

Where is the Vios fuse box located?

The Vios fuse box is located on the driver's side, under the large plastic panel above the instrument panel near the front windshield. You can open it by pulling it backward; if it doesn't open, use a screwdriver to pry it. Additional related information is as follows: 1. The fuse box is the central nervous system of a car. It is responsible for transmitting driving information to various parts of the vehicle, serving as a key component in the car's electronic control system. It is also one of the parts with higher technical content and stricter process requirements in the vehicle body. 2. Classification of car fuse boxes: (1) By fuse installation: can be divided into fuse tube boxes and fuse strip boxes. (2) By fuse size: can be divided into large fuse boxes, medium fuse boxes, and small fuse boxes. (3) By material: can be divided into plastic fuse boxes and bakelite fuse boxes. (4) By environmental standards: can be divided into eco-friendly fuse boxes and non-eco-friendly fuse boxes. (5) By installation method: can be divided into lead-type fuse boxes, circuit board-type fuse boxes, and instrument panel-mounted fuse boxes.

10

2

Share

What is the size of the Mondeo's wheel hubs?

The Mondeo's wheel hubs are 16 inches. The wheel hub is the central part of the wheel where the axle is installed, commonly referred to as the 'rim' or 'steel rim.' Wheel hubs are prone to accumulating dirt, and if not cleaned for a long time, they may corrode or deform, leading to potential safety hazards. The differences between steel wheel hubs and alloy wheel hubs are as follows: 1. The main advantage of steel wheel hubs is their simple manufacturing process. They are typically produced using casting techniques, such as low-pressure casting for aluminum alloy wheel hubs, which results in relatively low production costs and strong resistance to metal fatigue. 2. Steel wheel hubs are heavier; the same-sized steel hub is much heavier than an aluminum alloy one, resulting in greater inertial resistance, poorer heat dissipation, and a tendency to rust. 3. Alloy wheel hubs are lighter, have lower inertial resistance, and are manufactured with high precision, resulting in minimal deformation during high-speed rotation. This reduces inertial resistance, improving the vehicle's straight-line driving performance and reducing tire rolling resistance, thereby lowering fuel consumption. 4. Alloy materials have about three times the thermal conductivity of steel, offering excellent heat dissipation. This benefits the vehicle's braking system, tires, and helps mitigate heat-related degradation in the braking system.

20

0

Share

What is the actual fuel consumption of the Cavalier?

The 1.5L engine of the Cavalier delivers a real-world urban fuel consumption of 6 liters while ensuring adequate power, under typical non-smooth road conditions. Of course, the vehicle's fuel consumption per 100 kilometers is not fixed, as factors such as different road conditions, load capacity, temperature, and whether the air conditioning is on can all affect fuel consumption. Below is an introduction to the Cavalier: 1. Name Meaning: The English name "Cavalier" means "knight," originating from the historically popular compact model Chevrolet Cavalier in General Motors' North American history. 2. Exterior Design: The Cavalier Redline Shang·Hong series is designed with the core concept of vitality aesthetics, utilizing Chevrolet's new-generation design language. The body proportions are sleek, featuring a family-style front face with a dual black grille. On the side, the new Cavalier Redline Shang·Hong series incorporates black window trim, paired with exclusive smoked black exterior mirrors and red decorative strips, along with 16-inch black aluminum alloy sport wheels adorned with red logos.

4

0

Share

Is the Built-in Fuel Filter Really Unnecessary to Replace?

Will there be more automatic or manual transmission cars in the future?

What Causes a Motorcycle to Stall When Throttling Down?

What causes a single clunking sound from the front wheels when starting to turn?

Where is the Vios fuse box located?

What is the size of the Mondeo's wheel hubs?

What is the actual fuel consumption of the Cavalier?

Why does the automatic transmission not move when shifted to D gear?

What are the tips for using the E-gear in an automatic transmission?

What is the ground clearance of the Changan Eado?

What are the dimensions of the Mocha?