···
Log in / Register

Is the Buick Excelle's fuel consumption high?

6Answers
MacAmara
09/02/2025, 12:56:25 AM

The Buick Excelle, as a compact family car equipped with a three-cylinder engine, has average fuel consumption data. The Ministry of Industry and Information Technology's comprehensive fuel consumption data is as follows: 1. 1.0T+6DCT: 5.2 liters/100km. 2. 1.0T+6MT: 5.2 liters/100km. 3. 1.3T+6AT: 5.8 liters/100km. Extended feedback from actual car owners' fuel consumption data is as follows: 1. The average fuel consumption of 1,400 '1.0T+6-speed dual-clutch' car owners is 6.89 liters/100km. 2. The average fuel consumption of 477 '1.0T+6-speed manual' car owners is 6.25 liters/100km. 3. The average fuel consumption of 2,263 '1.3T+6-speed automatic manual' car owners is 7.71 liters/100km.

Was this review help?
114
Share
BraxtonFitz
09/14/2025, 03:05:41 AM

The fuel consumption of the Buick Excelle isn't particularly high. Overall, it's around 8-9 liters per 100 kilometers in urban driving, and it becomes more fuel-efficient on highways, roughly 6-7 liters. The car is equipped with a 1.3T three-cylinder engine, which has undergone significant technical optimizations, such as the intelligent electronically controlled fuel injection system that automatically adjusts fuel volume to avoid waste. Personally, I find the Excelle's fuel consumption quite normal for a compact car—neither too high nor too low. If you get used to driving it, the monthly fuel cost would just be a few hundred yuan. If the fuel consumption suddenly increases, it might be due to aggressive driving habits, frequent hard braking, or slow-moving traffic in congestion. Additionally, factors like excessive air conditioning usage or insufficient tire pressure can also contribute to extra fuel consumption. Paying attention to gentle acceleration and maintaining a steady speed can help keep fuel consumption stable. Don't worry too much—the Excelle is a hassle-free choice. In short, it's not a major issue; just be a bit mindful. To track changes in fuel consumption, keep an eye on the dashboard or use an app for recording.

Was this review help?
17
Share
Expand All
OLandon
10/28/2025, 03:48:50 AM

I've been driving a Buick Excelle 1.0T model for daily commuting recently, with an average fuel consumption around 8.5L/100km - not too high nor too low. I think the actual fuel efficiency really depends on driving habits. It's quite economical on highways, achieving about 6L/100km, but the consumption immediately jumps above 9L/100km in city traffic jams. The main factor is driving style - I've noticed aggressive acceleration and braking quickly spikes the fuel usage. Regular maintenance like oil changes and air filter replacements also helps keep the engine running smoothly and reduces consumption. The Excelle's turbocharged engine has decent fuel management technology, though it's slightly thirstier than Japanese counterparts like the Honda Civic. Overall I'm quite satisfied - monthly fuel costs stay within budget, and the car has been trouble-free for two years. With careful driving you can achieve better efficiency, so don't be scared by exaggerated claims.

Was this review help?
20
Share
Expand All
TessaLynn
12/11/2025, 03:04:46 AM

The fuel consumption of the Buick Excelle is moderate in my opinion, not too high. After driving my friend's car a few times, the 1.3T engine averages a little over 8 liters in the city and drops to 6-7 liters on the highway, which is quite good. The key factors affecting fuel consumption are road conditions and driving habits—frequent traffic jams or aggressive driving will spike the consumption, while maintaining a steady throttle keeps it under control. Additionally, the engine's design with three-cylinder technology helps save fuel, but poor maintenance, such as a dirty air filter, might increase consumption. I think the daily fuel consumption of the Excelle is reasonable and not a big burden, as long as you avoid always running the AC at max or overloading the car. Simple checks on the car's condition can prevent sudden spikes in fuel consumption.

Was this review help?
9
Share
Expand All
QuinnLynn
01/31/2026, 09:17:49 PM

Regarding the fuel consumption issue of the Buick Excelle, I think it depends on the specific situation. Overall, it's not high but not the most fuel-efficient either. Under normal driving conditions, it's about 8-9 liters per 100 kilometers in the city and a bit over 6 liters on the highway. There are many influencing factors, such as prolonged engine warm-up time in cold weather, which temporarily increases fuel consumption; complex road conditions like frequent uphill and downhill driving also consume more fuel. Driving style has the greatest impact, and smoother driving can save a lot of fuel. The engine structure of the Excelle is decent, more efficient than some older models, but slightly higher in fuel consumption compared to the Toyota Corolla. Regular maintenance is important, such as changing the oil and adjusting tire pressure to maintain stable fuel consumption. Don't worry too much, just keep track of mileage and fuel data. After driving for a while, you'll get a feel for the actual fuel consumption level.

Was this review help?
10
Share
Expand All
MayaLee
04/26/2026, 02:45:23 PM

The fuel consumption of the Buick Excelle is generally acceptable—not excessively high but slightly above some competitors. For example, my car with the 1.0T configuration averages around 8 liters per 100 km in daily driving, and easily achieves 6 liters on highways. Driving habits play a key role; smooth driving without sudden acceleration or braking can save over 1 liter. The turbocharged engine in the Excelle is well-optimized for fuel efficiency at low RPMs, though it still consumes slightly more than models like the Volkswagen Bora or Honda Fit. Factors like poor road conditions or frequent AC use can cause fluctuations in fuel consumption. It’s advisable to use cruise control for steady-speed driving and perform regular maintenance, such as checking spark plugs, to prevent sudden spikes in fuel usage. I find the car offers good value for money, with fuel costs rarely a concern, keeping monthly expenses well under a few hundred yuan.

Was this review help?
6
Share
Expand All
More Q&A

Where is the crankshaft sensor located on the Nissan Teana?

Nissan Teana's camshaft position sensor is installed at the junction between the engine and transmission, mounted on the transmission housing. The function of the camshaft position sensor is to collect the position signal of the valve camshaft and input it to the ECU, enabling the ECU to identify the top dead center of cylinder 1 compression for sequential fuel injection control, ignition timing control, and knock control. The methods for measuring the condition of the camshaft position sensor are as follows: 1. The camshaft sensor is generally a three-wire Hall sensor, with one 12V or 5V power line, one signal line, and one ground line; 2. Unplug the connector, turn the key to the second position, and use a voltmeter to confirm that the power line has voltage output. Use the meter to identify the ground line by connecting one probe to the confirmed power line and the other probe to the remaining two lines; the line showing voltage is the ground line, and the remaining one is the signal line; 3. Now turn off the ignition, extend the signal line, reconnect the connector, start the engine, and measure between the signal line and ground line to check for signal voltage. The output voltage should be less than the supply voltage. If no signal voltage is detected, the sensor is faulty.
111
Share

Is Adhesive Used for Engine Paper Gaskets?

Engine paper gaskets do not require adhesive application in sealing situations. Engine Introduction: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines, external combustion engines (such as Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. The term engine can refer to either the power generation device or the entire machine including the power unit (e.g., gasoline engines, aircraft engines). Engine Maintenance Considerations: Clean the air filter. The air filter is directly related to the engine's air intake during vehicle operation. If the car has been driven on dusty roads, special attention should be paid to the cleanliness of the air filter; Remove throttle valve sludge. Generally, the throttle valve should be cleaned when the vehicle has traveled 10,000 to 20,000 kilometers; Clean injector carbon deposits. For cleaning the combustion chamber, a specialized carbon remover can be used to soften the carbon deposits on the combustion chamber and injectors, separating them from the component surfaces, and then removing the softened carbon deposits. This carbon removal method is highly effective, offering advantages such as not damaging component surfaces compared to previous direct wiping methods, and significantly improving the efficiency of carbon removal.
109
Share

What Causes the Clicking Sound When Releasing the Brake Pedal?

The causes of a clicking sound when releasing the brake pedal can vary, including aging of the brake pedal cable, air entering the brake fluid, or issues with the brake master cylinder. Aging Brake Pedal Cable: When a car has been in use for a long time, it's normal for various components to show signs of aging. If the brake pedal cable has aged, it can result in a clicking sound when the brake pedal is released. The solution to this issue is quite straightforward—simply replace the old brake pedal cable with a new one. Air in the Brake Fluid: When air enters the brake fluid, it can also cause a clicking sound when using the brake pedal. This situation requires professional equipment at a repair shop or 4S store to bleed the air from the brake fluid or to replace the brake fluid entirely. It's important to note that most cars should have their brake fluid replaced every 40,000 kilometers or so to prevent brake failure and ensure safe driving. Brake Master Cylinder Issues: The reasons behind a clicking sound due to a faulty brake master cylinder are more complex and require professional inspection and repair at a repair shop or 4S store. The brake master cylinder is a critical component of the car's braking system, and it's best to use original manufacturer parts when replacing it.
114
Share

What Causes Unusual Noises When Driving a Car?

Startup or driving when the vehicle has abnormal noise reasons are as follows. Engine abnormal noise: Abnormal noises in the engine compartment are usually sharp metallic sounds. Engine noises are mainly caused by excessive wear of some parts or improper assembly and adjustment. These noises may well indicate that the engine is about to fail, so when the engine makes abnormal noises, it is necessary to go to the repair shop in time to prevent the failure from expanding. Transmission abnormal noise: Transmission noises are generally caused by bearing or gear wear. When the car is driving and suddenly accelerating, you can hear the noise from the chassis. The gears make a "click" sound, and the bearing failure will make a "rustling" sound at this time, which will turn into a "rattling" or "whistling" sound when it is serious. Transmission repair costs are high, so it is necessary to check frequently and change the oil frequently. Body abnormal noise: It may be that the material stiffness of the body itself is not good, and after long-term use, deformation occurs, resulting in friction with other parts and abnormal noise. At this time, just stick a tape on the friction part to basically relieve it. Another reason is that long-term driving causes some parts to loosen, and then it is necessary to find the loose part and fix it.
119
Share

What is the annual inspection system for small cars?

Small and micro non-operational passenger vehicles must undergo inspection once every 2 years within the first 6 years. After exceeding 6 years, inspection is required once every year. For vehicles older than 15 years, inspection is required once every 6 months. Operational passenger vehicles: Within the first 5 years, inspection is required once every year. After exceeding 5 years, inspection is required once every 6 months. Annual inspection for medium-sized vehicles: Trucks and large, medium-sized non-operational passenger vehicles must undergo inspection once every year within the first 10 years. After exceeding 10 years, inspection is required once every 6 months. Annual inspection for motorcycles: Within the first 4 years, inspection is required once every 2 years. After exceeding 4 years, inspection is required once every year. Other vehicle types: Tractors and other motor vehicles must undergo inspection once every year. Operational motor vehicles that pass the safety technical inspection within the stipulated inspection period must repeat the safety technical inspection. Vehicles exceeding the scrapping age limit cannot be transferred but can continue to be used. For buying and selling, the vehicle owner can first obtain the vehicle's scrapping certificate from the vehicle management office before proceeding with the transaction.
120
Share

What are the effects of not completely draining old engine oil?

Small amounts of residual old engine oil have minimal impact. When changing the engine oil, it is common practice to replace both the oil and the oil filter simultaneously. The newly added oil can dilute the old oil remaining in the engine, and installing a new oil filter helps remove impurities from the old oil. Typically, there are two methods for changing engine oil: one involves draining the used oil through the oil pan drain plug, and the other uses an oil extractor to suction out the used oil from the dipstick tube. Both methods may leave some residual used oil in the engine due to its complex internal structure, but these small amounts of leftover old oil generally do not cause significant issues.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.