Is the BMW 320 a front-wheel drive or rear-wheel drive car?

Can Automatic Rearview Mirrors Be Adjusted Manually?

Automatic rearview mirrors have gear mechanisms and should not be adjusted manually. An automatic rearview mirror is a tool that allows the driver, while seated in the cockpit, to directly obtain information about the rear, sides, and lower areas of the vehicle. For the convenience of the driver and to prevent traffic safety accidents and ensure personal safety, regulations in various countries require that vehicles must be equipped with automatic rearview mirrors, and all such mirrors must be adjustable. The method for setting the automatic downward tilt of the rearview mirror is as follows: 1. Power on: Turn on the vehicle's power without starting the engine (press the start button without stepping on the brake); 2. Set memory gear: Set memory seats 1, 2, and 3, and select the seat gear; 3. Adjust button: Choose the side mirror you wish to set, press the mirror adjustment selection button (left or right); step on the brake, shift to R gear, press the 4-way adjustment button, adjust to the desired position, and hold the seat memory button (1, 2, or 3) for about 2 seconds; 4. Readjust selection button: Step on the brake, shift to P gear, and press the mirror adjustment selection button once more.

19

3

Share

Where to Adjust the Height of the Driver's Seat?

There is a lever on the left side of the driver's seat and the right side of the passenger seat for adjusting the height. Pull the lever to adjust the seat height. Below are more details about adjustments in different positions: 1. Seat height adjustment: The ideal height is when there is about one to two fists of space between the top of your head and the roof, ensuring that your eye level is slightly above the center of the vertical distance of the front windshield. 2. Seat forward/backward adjustment: Your feet should be able to fully press the clutch and brake pedals; when holding the steering wheel, your arms should be slightly bent for optimal positioning. 3. Steering wheel adjustment: The steering wheel position should be adjusted based on the seat position. The best position is when your arms are straight and resting on the top of the steering wheel, with your wrists just touching the edge of the wheel, indicating the correct adjustment. 4. Backrest angle adjustment: The backrest angle should be set reasonably—not too reclined nor too upright—to minimize the distance between your body and the steering wheel, reducing potential injury from airbags in emergencies. 5. Headrest height adjustment: The headrest should be level with your head or the soft middle part aligned with the top of your ears. The most protective part of the headrest is its center, which effectively safeguards your head and neck in the event of a severe impact.

18

2

Share

What is the scoring standard for pulling over to park?

Introduction to the scoring standards for pulling over to park: 1. Before parking, failing to observe the traffic conditions behind and to the right through the interior and exterior rearview mirrors and turning the head to confirm safety results in a 100-point deduction. 2. After the examiner issues the instruction to pull over to park, failing to stop within the specified distance results in a 100-point deduction. 3. After parking, if the vehicle body exceeds the right edge line of the road or the sidewalk edge, a 100-point deduction is applied. 4. If you need to exit the vehicle, failing to turn your head to observe the left rear traffic conditions before opening the door results in a 100-point deduction. 5. Failing to close the door after exiting the vehicle results in a 100-point deduction. 6. After parking, if the vehicle body is more than 50cm away from the right edge line of the road or the sidewalk edge, a 100-point deduction is applied. 7. After parking, if the vehicle body is more than 30cm but not more than 50cm away from the right edge line of the road or the sidewalk edge, a 10-point deduction is applied. 8. After parking, failing to firmly engage the parking brake results in a 10-point deduction. 9. Releasing the service brake pedal before firmly engaging the parking brake results in a 10-point deduction. 10. Failing to turn off the engine before exiting the vehicle results in a 5-point deduction.

11

5

Share

Under what circumstances is it prohibited to make a U-turn while driving a motor vehicle?

When driving a motor vehicle, U-turns are prohibited in the following situations: at locations with no U-turn signs or markings; at locations with no left-turn signs or markings; at railway crossings; on pedestrian crosswalks, bridges, sharp curves, steep slopes, inside tunnels, or on road sections where hazards are likely to occur. U-turns are allowed under the following circumstances: When there is a U-turn traffic light or sign: At intersections with U-turn traffic lights, a U-turn can be made when the U-turn light is green. At intersections with U-turn signs or lanes marked with U-turn indicators, a U-turn can be made while ensuring the safety of oneself and others. When there is no U-turn sign but left turns are allowed (and no no-U-turn signs or markings are present): Vehicles can make a U-turn at intersections where left turns are permitted and no no-U-turn signs or markings are present. It is important to note that the vehicle must proceed according to the left-turn lane traffic signal without affecting the normal movement of other vehicles. If making a U-turn at an intersection with a left-turn waiting area, the vehicle can first enter the waiting area when the straight-through light is green and wait until the left-turn light turns green before making the U-turn. U-turns are allowed at dashed lines: Whether it is a white or yellow dashed line, U-turns are permitted. For double yellow lines with one solid and one dashed, check if the side you are on is dashed. If it is dashed, a U-turn can be made safely; if it is solid, a U-turn is not allowed.

19

0

Share

When will the new 2021 Accord be launched?

The 2021 model was officially launched in September 2020. Below is a related introduction to the new Accord: 1. Exterior and Interior: The body features sharp lines with strong muscular contours. Both the front and rear lights adopt triangular designs, giving a fierce appearance. The Accord's interior is simple and elegant, making it well-suited for business use. The dashboard employs a two-tone design with a dark upper section and light lower section, aligning with current popular styles. Wood-grain trim extends from below the center console to the front center storage box, with matching materials used on door panels. 2. New Engine: Equipped with i-VTEC intelligent variable valve timing and lift electronic control system. Compared to previous engines, it can control intake valve operation via ECU to maintain optimal engine performance. Crucially, it delivers over 80% torque consistently between 2500-5500 rpm, representing a key improvement that enables responsive acceleration in this range. 3. New Transmission: The front automatic transmission matches perfectly with the engine. Gear shifts occur smoothly at approximately 4000 rpm for 1st to 2nd gear and 5500 rpm for 2nd to 3rd gear, reaching nearly 120 km/h without noticeable shift shock. The computer control system automatically cuts fuel at 5000 rpm when in neutral. 4. Handling: Features front double-wishbone and rear 5-link double-wishbone independent suspension. Compared to traditional MacPherson struts, this system offers more precise wheel tracking and better cornering stability, though with slightly reduced suspension travel and compromised damping performance on rough roads.

4

2

Share

Is it still necessary to affix the compulsory traffic insurance label on the windshield?

If electronic insurance policies have been implemented locally, there is no need to affix the compulsory traffic insurance label on the vehicle. However, if electronic policies have not yet been implemented, the compulsory traffic insurance label must still be displayed. According to Article 95 of the Road Traffic Safety Law: If a motor vehicle driven on the road does not display the inspection qualification label or insurance label, or if the driver does not carry the vehicle registration certificate or driver's license, the traffic management department of the public security organ shall detain the vehicle, notify the party to provide the corresponding license, label, or complete the necessary procedures, and may impose penalties in accordance with Article 90 of this law (a warning or a fine of not less than 20 yuan but not more than 200 yuan). As of 2022, provinces and cities that have abolished the paper label for compulsory traffic insurance include: Beijing, Shanghai, Shandong, Shanxi, Guangdong, Henan, Hubei, Hunan, Jiangxi, Guizhou, Guangxi, Yunnan, Shaanxi, Hebei, Sichuan, and Gansu. Compulsory Traffic Insurance for Vehicles: The full name of compulsory traffic insurance is "Compulsory Liability Insurance for Motor Vehicle Traffic Accidents." It is a mandatory liability insurance where the insurance company compensates for personal injuries, deaths, and property losses of victims (excluding vehicle occupants and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. The premium is based on the nationally unified standard rates. However, the price of compulsory traffic insurance varies depending on the vehicle type, with the main influencing factor being the number of seats. Compared to the more than 20 exemption clauses in commercial third-party liability insurance, compulsory traffic insurance covers a much broader range, including losses caused by intentional acts of the victim, the insured's own property losses, related arbitration and litigation costs, and certain indirect losses caused by accidents. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory traffic insurance will provide compensation within the liability limits, with no deductible or exemption clauses. Introduction to Electronic Insurance Policies: An electronic insurance policy refers to an electronic policy issued by an insurance company using digital signature software and enterprise digital certificates that comply with the PKI system, bearing the electronic signature of the insurance company. An insurance policy, abbreviated as a policy, is the official written proof of the insurance contract between the insurer and the insured. The policy must fully record the rights, obligations, and responsibilities of both parties to the insurance contract. The content recorded in the policy serves as the basis for the performance of the contract by both parties. The insurance policy is proof of the establishment of the insurance contract. Advantages of Electronic Insurance Policies: Saves paper resources, eliminating the need to print insurance proof labels; Time-saving and convenient, unrestricted by time or location, with information readily available online anytime, fast and easy; Allows for reissuance and resending, eliminating worries about loss. If a paper version is needed offline, it can be printed or mailed; Easier management, as electronic unification makes it more convenient for insurance companies and traffic police departments to manage the insurance information of various vehicles.

7

5

Share

Is the BMW 320 a front-wheel drive or rear-wheel drive car?

Can Automatic Rearview Mirrors Be Adjusted Manually?

Where to Adjust the Height of the Driver's Seat?

What is the scoring standard for pulling over to park?

Under what circumstances is it prohibited to make a U-turn while driving a motor vehicle?

When will the new 2021 Accord be launched?

Is it still necessary to affix the compulsory traffic insurance label on the windshield?

How to Deal with Overheated Brake Pads During Continuous Downhill Driving?

What is the maximum speed allowed in a 70 km/h speed limit zone?

How to Use the Rearview Mirror Heating in the Buick Verano?

What is the engine oil specification for the Geely Golden Eagle?