Is the Baojun 730 a front-wheel drive or rear-wheel drive car?

2 Answers
DelaneyLee
07/25/25 5:29am
The Baojun 730 is a front-wheel drive vehicle, which is an MPV model under the Baojun brand. In terms of body dimensions, the Baojun 730 measures 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. For powertrain, the Baojun 730 is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The rear design of the Baojun 730 has undergone significant adjustments, with reduced chrome trim and an enlarged tailgate that spans the entire width of the rear. The tail lights have been redesigned from a split-style to a one-piece design, featuring sharp lines and a horizontal LED light strip that is both stylish and eye-catching, giving it a technological feel.
Was this review help?
15
2
Share
RemingtonRose
08/10/25 5:44pm
As a long-time owner of the Baojun 730 for over three years, I can definitively tell you that this car is front-wheel drive, designed with the engine in the front driving the front wheels. It suits family scenarios like picking up kids or weekend short trips, offering smooth power delivery and fuel efficiency, performing steadily on daily city roads. The advantage of front-wheel drive is its high space utilization, allowing more luggage inside—our family trips with folding bikes were no problem. Of course, its performance on slippery roads or steep climbs is average, less agile than rear-wheel drive, but considering its affordable price and low maintenance costs, it’s fully worth it as a commuter. Overall, front-wheel drive makes the Baojun 730 economical and practical, easy to drive, and I recommend family users prioritize this drivetrain.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

How to Connect a Mobile Phone to Volkswagen Car Bluetooth?

First, turn on the [Bluetooth] function on both your mobile phone and the Volkswagen car. Then, enable [Discoverable Mode]. Your phone should be able to detect the [Car Bluetooth]; simply tap on it to initiate pairing.
1
4
Share

How to Turn Off the Engine Immobilizer System Light?

First, check the front and rear oxygen sensors. If these are faulty, the initial symptom is usually the engine warning light staying on (or occasionally flashing) on the dashboard. Generally, when this issue occurs, it's essential to promptly troubleshoot or replace the faulty components. Most modern vehicles are equipped with both front and rear oxygen sensors.
6
2
Share

What is the method for bleeding antifreeze?

Antifreeze coolant refers to a coolant with antifreeze function. Press the button to open the front engine hood. Then lift the front engine hood. After that, open the cap of the small coolant reservoir. Then drain all the antifreeze. Next, fill the reservoir with antifreeze until it is full. Run the engine until the water temperature reaches 90 degrees and no longer rises. Then open the reservoir cap to release the air.
17
2
Share

What are the specific steps for vehicle exhaust emission testing?

Information entry needs to be performed inside the login booth. The testing scheduler will log into the computer and allocate the testing lines. Vehicles ready for inspection can only proceed when they arrive at the designated testing line. Test personnel will follow the computer's instructions to perform the operations. After passing a series of tests successfully, the testing department will issue the environmental label to the vehicle owner.
16
1
Share

What are the steps for rear axle removal and installation?

First, lift the vehicle to be disassembled to a suitable height, and begin by removing the rear stabilizer link. Remove the rear stabilizer bar, then proceed to disassemble the outer end screws of the left and right upper link swing arms. Loosen the connecting screws. Remove the four 17mm screws securing the rear axle, and the rear axle can then be taken off. Tighten the screws of the left and right upper link swing arms and the exhaust pipe fixing rubber block, and finally reinstall the rear stabilizer bar.
20
0
Share

Difference Between 97 and 98 Octane Gasoline

Compared to 97 octane, 98 octane gasoline has a higher anti-knock index (RON) by one octane unit. Increasing the octane number of 97 octane unleaded gasoline by one unit requires greater technical difficulty and higher processing costs. The higher the octane rating, the stronger the anti-knock performance. What people generally consider as "purer" and better is mainly reflected in the gasoline's anti-knock properties. The applicable ranges for different octane ratings are as follows: 1. 90 octane gasoline: Suitable for vehicles with engine compression ratios between 7.5 and 8.0. 2. 93 octane gasoline: Suitable for vehicles with engine compression ratios between 8.0 and 8.5. 3. 97 octane gasoline: Suitable for vehicles with engine compression ratios between 8.5 and 9.5.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.