Is the 4G63 Made of Cast Iron?

1 Answers
FrankLynn
07/29/25 10:50pm
4G63 is made of cast iron. It can be seen in the Mitsubishi Evo, the 4G63 is an automotive internal combustion engine, the engine used in the Evo. Here is more information about the 4G63: 1. Mitsubishi began designing and manufacturing automotive engines in 1964, and by the 1970s, it adopted a naming convention of "one digit + one letter + two digits." 2. In 4G63, the "4" represents the number of cylinders; 3. "G" stands for gasoline engine; 4. "6" is the engine family number; 5. "3" is the designation within the family.
Was this review help?
8
2
Share
More Forum Discussions

How fast can the Tairong GP2200R go?

Tairong gp2200r can run 135 kilometers per hour. Introduction to Tairong's market: Tairong scooters are too famous and have a certain influence in the entire market, but Tairong's market is not limited to scooters. In 2018, it began to be active in the field of civilian sports cars, and successively launched the GP2200R and GP1380R. These two models have achieved good results with their unique appearance design and high cost performance. Introduction to Tairong gp2200r: An entry-level sports car. In terms of appearance design, the Tairong GP2200r gives people a feeling of fullness and strength. The main color is blue, and it is matched with black and white, which has a strong sense of high-end. In terms of styling, like high-end sports cars, it also adopts a powerful and domineering style. The entire curve and the paintwork of the exterior parts are satisfactory.
14
2
Share

What to Do If You Accidentally Fill a Gasoline Car with Diesel?

If you accidentally fill a gasoline car with diesel, do not attempt to start the engine. First, drain the diesel completely and refill with gasoline. If you realize the mistake after driving for some time, the car may exhibit symptoms such as severe shaking or poor acceleration. In this case, immediately turn off the engine, stop the vehicle, and call for a tow truck to take the car to a 4S shop. There, the diesel will be drained, the fuel system will need to be cleaned, the gasoline filter replaced, and a comprehensive inspection performed. After the inspection, refill the tank with gasoline. Diesel engines do not have spark plugs; they rely on compressed air to raise the temperature to the ignition point of diesel, which has a lower auto-ignition temperature. If diesel is added to a gasoline engine, it will auto-ignite before the spark plug fires, causing combustion inside the cylinder, which can lead to severe consequences. Additionally, gasoline engines have smaller fuel injectors, which cannot fully atomize diesel, resulting in incomplete combustion and insufficient power. Over time, carbon buildup in the engine will increase dramatically, potentially clogging the fuel injectors.
20
2
Share

What are the methods to identify whether a used car has been in an accident? (No answer)

Methods to identify whether a used car has been in an accident include: 1. Inspect the exterior of the car body for signs of paint waves on the doors and front/rear fender surfaces, check if the paint color and gloss are uniform, and see if there is any paint residue on the surrounding rubber seals; 2. Open the hood and run your fingers along the edges—it should feel naturally straight, smooth, and not rough, indicating it is one-piece. Also, check if the hood locking mechanism is deformed or misaligned, and if the hydraulic struts are failing or not functioning properly; 3. Examine the welding points where the radiator frame and fender upper longitudinal beams meet. The welding points should be slightly rounded and slightly recessed. If the welding points appear raised, irregularly shaped, rough, or unevenly spaced, it indicates re-welding, proving the radiator frame has been impacted; 4. Observe the front bulkhead to see if the upper edge is straight and whether there are obvious signs of repair on the upper edge of the bulkhead separating the engine compartment and the passenger compartment.
9
4
Share

How to reset the tire pressure monitoring system on the Southeast DX3?

The method to reset the tire pressure monitoring system on the Southeast DX3 is as follows: The alarm can be cleared in the dashboard settings options. Below are the reasons why the tire pressure warning light may illuminate: 1. Tire puncture causing the tire pressure monitoring light to come on: This situation usually involves a very slow leak, making it difficult to immediately identify which tire is losing air. In this case, a tire pressure gauge can be used to measure the pressure. 2. Driving with low tire pressure for an extended period causing the tire pressure monitoring light to come on: This typically occurs when one tire's pressure is too low, and high-speed driving increases the tire temperature, leading to a rise in pressure. In such cases, it is advisable to stop and rest or replace the tire with a spare. 3. Long-term lack of inflation leading to low tire pressure and triggering the tire pressure monitoring light: When the pressure drops below 1.8, the tire pressure monitoring light will illuminate. Therefore, regular checks should be performed to ensure the tire pressure monitor is functioning correctly. If the tire pressure monitor does not alert promptly when an issue arises, it may indicate a problem with the monitor itself.
2
2
Share

How to Add Windshield Washer Fluid to a Volkswagen Passat?

Here are the 4 steps to add windshield washer fluid to a Volkswagen Passat: 1. Use the wiper control knob to first drain the existing washer fluid. 2. After spraying out all the old washer fluid, add a small amount of newly prepared washer fluid to the washer fluid reservoir. 3. Turn on the wiper switch again to clean out the remaining old washer fluid solution. 4. When no more fluid sprays from the nozzles, add approximately 4L of washer fluid, then securely close the cap to complete the process. Additional Information: 1. Never add coolant antifreeze or similar additives to the windshield washer fluid. This can create an oily film on the windshield, severely impairing visibility and increasing the risk of accidents! 2. If the windshield wipers are left on when the ignition is turned off, they will resume operation in the same setting when the ignition is turned back on. If there is frost, snow, or other obstructions on the windshield or rear window, this may damage the wipers or wiper motor. 3. If the system fails to spray fluid, first check if the washer fluid level is too low, then inspect whether the washer pump is faulty.
12
0
Share

Is a new passenger car exempt from inspection for 2 years?

Although new vehicles fall under the 6-year inspection exemption policy, national regulations still require owners to apply for an annual inspection sticker at the vehicle management office every 2 years. Inspection conditions: Vehicles whose actual condition does not match the information recorded on the license and registration files, vehicles with damaged/incomplete license plates or registration certificates, illegible text, or self-made license plates. Inspection precautions: No exterior modifications are allowed. The tint of sunshade/anti-explosion window films cannot be too dark (interior items should be visible from one meter away - mainly applies to vans and trucks; not strictly enforced for passenger cars with ≤5 seats). Vans and trucks must display enlarged rear license plate numbers. The number of leaf springs cannot be altered. The seating capacity of vans cannot be increased or decreased. A fire extinguisher is required. No modifications are allowed to box truck compartments (no side doors, no roof openings, no tailgates). Tire sizes cannot be changed, and tread patterns must be consistent on each axle. Vehicles with outstanding traffic violations or court impoundments cannot undergo inspection.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.