···
Log in / Register

Is the 2021 Emgrand's Transmission Made by Wanliyang?

6Answers
Tim
08/31/2025, 10:13:47 PM

2021 Emgrand's transmission brand is Punch. Punch Powertrain (abbreviated as Punch) is headquartered in Sint-Truiden, Belgium, and is a supplier of energy-efficient powertrain systems. With over 50 years of experience in the design and production of continuously variable transmissions (CVT), it also specializes in the development, production, and supply of components for hybrid vehicles (48V and plug-in hybrid PHEV) and dual-clutch transmissions (DCT). The 2021 Emgrand's automatic transmission uses a CVT. Unlike traditional automatic transmissions with distinct gear shifts, a CVT operates without specific gear ratios, providing continuous and smooth power delivery. For daily use of the 2021 Emgrand's transmission, the following points should be noted: Do not delay transmission fluid changes for extended periods. While many modern transmissions feature "maintenance-free" fluid, this does not mean it never requires replacement. Prolonged neglect can damage internal components such as bearings and housings. Avoid prolonged coasting in neutral. While some experienced drivers might coast in neutral with manual transmissions, doing so in an automatic can cause overheating and abrupt engagement when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers attempt quick gear changes while still moving, which can severely damage transmission gears and lead to grinding or failure over time. Avoid frequent steep hill climbs in Drive (D). Automatic transmissions may overheat or upshift prematurely under heavy load, reducing climbing power. Use manual mode to lock in lower gears or switch to sport mode for better protection. Do not tow the vehicle long distances with driven wheels on the ground. In case of a breakdown, use a flatbed tow truck with the transmission in Neutral (N). Towing with a rope or similar method can cause severe transmission damage.

Was this review help?
119
Share
McAxel
09/13/2025, 01:12:56 AM

As an experienced car enthusiast, I have always been following Geely's models. The 2021 Emgrand typically uses a CVT transmission provided by JATCO, not Wanliyang. Wanliyang is a brand under FAW in Changchun, commonly found in models like Besturn. The transmission design of the Geely Emgrand is renowned for its smoothness and fuel efficiency, making it quite comfortable to drive in congested urban areas with quick power response. I recommend taking a test drive when purchasing a car to feel whether the gear shifts are smooth, as the quality of the transmission directly affects driving experience and fuel efficiency. If you encounter issues like strong jerking, it's best to get it checked early to avoid minor problems turning into major repairs. Overall, this Emgrand is a reliable choice with simple maintenance, low costs, and easily available parts. Never trust online rumors blindly; consulting an official dealership is the most reliable approach, and regular maintenance is key.

Was this review help?
7
Share
Expand All
DiVanessa
10/27/2025, 02:00:38 AM

I've been into cars for many years. The 2021 Emgrand actually uses a CVT-type transmission, mainly supplied by the international brand JATCO, not involving the Wanliyang brand. Wanliyang transmissions are more commonly found in certain vehicle models, like their SUV series. The Emgrand's transmission is quite intelligent, automatically adjusting the gear ratio to deliver faster acceleration and better fuel efficiency. I often drive it for my daily commute, and the gear shifts on highways are incredibly smooth with almost no jerking. However, it's important to note that improper maintenance can lead to noise or failure issues. When choosing a car, prioritize the affordability of original parts—Emgrand's widespread service stations make maintenance hassle-free. I recommend changing the transmission fluid every 50,000 kilometers to extend its lifespan. Safety comes first when driving; address any abnormalities promptly without delay. Overall, this car offers great value for money and is perfect for everyday use.

Was this review help?
11
Share
Expand All
VanAna
12/10/2025, 01:14:01 AM

As someone who pays close attention to automotive safety, I know the 2021 Emgrand uses a CVT transmission, which is not a Wanliyang product. Wanliyang transmissions are more commonly seen in FAW vehicles, while Geely Emgrand opted for CVT to balance power and fuel efficiency. Transmission reliability directly impacts driving safety - failures like rainy-day slippage can increase risks. I believe checking gear status before daily driving is crucial, and regular fluid maintenance prevents major breakdowns. This Emgrand transmission has good feedback with low failure rates, but beginners shouldn't cheap out on non-OEM parts to avoid issues. Ultimately, safety is no trivial matter - understanding core components helps greatly.

Was this review help?
1
Share
Expand All
VictoriaDella
01/30/2026, 02:25:14 AM

Having driven many cars, I can say that the 2021 Emgrand typically comes with a CVT transmission, supplied by companies like JATCO. Wanliyang isn't used here. Wanliyang belongs to FAW, while Geely vehicles mostly use their own or international brand transmissions. I've experienced the Emgrand's driving as effortless and smooth, ideal for city commuting. If you're considering buying a car, don't just focus on the brand and performance—test drive it yourself. The importance of the transmission lies in controlling fuel consumption and ensuring smooth driving. Checking the filter and oil level during each maintenance can save you money in the long run. Car enthusiast groups all agree that this Emgrand is easy to maintain and highly practical. I recommend browsing forums more to exchange tips and find reliable channels to address any issues.

Was this review help?
9
Share
Expand All
LeBrody
04/25/2026, 01:29:37 PM

As someone who frequently drives long distances, I recall that the 2021 Emgrand was equipped with a CVT transmission commonly supplied by JATCO, not Wanliyang's product. Wanliyang is more often used in FAW Besturn models, while Geely's transmission strategy emphasizes efficiency and practicality. When driving the Emgrand, I found its gear shifts smooth and acceleration fluid, especially with ample power when climbing hills. For maintenance, it's recommended to check the fluid condition every 40,000 kilometers to prevent wear—a low-cost measure that ensures long-term performance. When choosing a car, consider how the transmission type affects driving fatigue: automatics are less taxing, while manuals are cheaper but more cumbersome. If issues like noise arise, visit a repair shop immediately to prevent greater damage. Overall, the Emgrand is reliable and offers peace of mind for daily use.

Was this review help?
19
Share
Expand All
More Q&A

Why won't my Isuzu diesel common rail vehicle start?

Here are the reasons why an Isuzu diesel common rail vehicle won't start: 1. Insufficient battery power or fuel level: Low battery charge or insufficient fuel are the easiest items to check, and are also the most likely factors affecting vehicle starting. 2. Steering wheel lock: The steering wheel being locked prevents starting - this is a common anti-theft feature found in many passenger vehicles. If the steering wheel isn't straightened or is moved after removing the key, it will activate the self-locking function, causing the steering lock pin to engage with the steering column, making the steering wheel immobile and preventing the engine from starting. 3. Gear position: Check the vehicle's gear position. In most cases, the correct starting positions for automatic transmission vehicles are P (Park) or N (Neutral).
114
Share

Why does the T-Roc automatically shut down after a few minutes of leaving the car?

The reason why the T-Roc automatically shuts down after a few minutes of leaving the car is that the driver has activated the automatic start-stop system. Cars equipped with this function will automatically shut down the engine, usually two seconds after the driver steps on the brake. To move again, the driver just needs to release the brake and step on the accelerator, or gently turn the steering wheel, and the engine will restart. This achieves the goal of reducing emissions and fuel consumption during short stops such as waiting for traffic lights. Below are some related introductions: 1. Advantages of automatic start-stop: Fuel saving. The core of automatic start/stop is automatic control of engine shutdown and startup, allowing the vehicle to temporarily shut down the engine during short stops, reducing unnecessary fuel consumption. 2. Automatic start-stop technology: Under certain conditions, such as waiting for a red light or temporary parking, the engine can automatically shut down. When the vehicle needs to continue driving, the driver can give commands by lifting the brake, stepping on the accelerator, or turning the steering wheel, and the engine will quickly start, allowing the vehicle to continue driving.
104
Share

Why Does the Temperature Inside a Car Get So High in Summer?

In summer, temperatures in many places can exceed 40 degrees Celsius, and the temperature inside a car can be even higher. This is because most car interiors are black, which easily absorbs heat, and the enclosed space of the car acts like an oven, causing the temperature inside to rise rapidly. For more details, please see below: 1. Precautions inside the car: Since the temperature inside the car is higher than outside, avoid placing flammable items inside as they can easily cause spontaneous combustion. Some items in the car may release toxic gases under high temperatures, so it's advisable to ventilate the car before getting in during summer. 2. Tires: Due to thermal expansion and contraction, tires age faster in summer. Therefore, try not to park your car under direct sunlight if possible. If unavoidable, consider applying darker window films or installing sunshades inside the car to prevent excessive interior temperatures.
109
Share

Does the timing mark position of the Peugeot 408 crankshaft pulley need to be aligned?

The timing mark of the Peugeot 408 crankshaft pulley must be accurately aligned. This is because the assembly of the timing gear and camshaft timing gear is a critical step during repair and assembly, and its quality directly affects the vehicle's power performance, so it must be taken seriously. During assembly, if both timing gears have timing marks, since the positional relationship between the gears and the crankshaft is already determined by the keyway, you only need to align the timing marks of the two gears for installation. Below is more information about the Peugeot 408: 1. Body dimensions: The new Peugeot 408 has a length of 4750mm, a width of 1820mm, a height of 1488mm, and a wheelbase of 2730mm. 2. Powertrain: The Peugeot 408 is equipped with mainstream engines from Dongfeng Peugeot, offering two displacement options: 2.0L and 1.6L. The 2.0L model is the main recommended displacement for the 408.
112
Share

Does the Wuling Rongguang New Kara carrying 2 tons count as overload?

It is considered overload. The official rated load capacity of the Wuling Rongguang small truck dual-row is 645kg, and the total vehicle weight should not exceed 2110kg. According to Article 92, Paragraph 2 of the "Road Traffic Safety Law of the People's Republic of China": For freight motor vehicles exceeding the approved load capacity, a fine ranging from 200 to 500 yuan shall be imposed; if the overload exceeds 30% of the approved load capacity or violates regulations by carrying passengers, a fine ranging from 500 to 2,000 yuan shall be imposed. Here is an introduction to the Wuling Rongguang New Kara: 1. Configuration: There are two displacement options available: 1.2L and 1.5L. The 1.2L engine can output 56kW and 112N·m of torque, while the 1.5L engine can output 73kW and 135N·m of torque. Both are paired with a 5-speed manual transmission. 2. Usage: It is more suitable for light and bulky cargo transportation industries, such as glass transportation and appliance transportation. In the current booming street vendor economy, the Wuling Rongguang small truck can also be used for selling fruits.
105
Share

Will Turning Too Close to the Edge Cause a Failed Turn?

Turning too close to the edge during a right-angle turn can easily result in hitting the corner, leading to a failed test. When entering a right-angle turn, it is recommended to drive close to the left line, maintaining a distance of approximately 30 centimeters from it. Below is additional information regarding right-angle turns: Deduction Points for Right-Angle Turns: Wheels touching the protruding point: disqualification; Wheels touching the road edge line once: 20-point deduction; Using reverse to complete the maneuver: 10-point deduction; Failing to use turn signals or using them incorrectly: 10-point deduction. Techniques for Right-Angle Turns: Drive as close to the outer edge of the road as possible, straighten the vehicle, and proceed slowly at a low gear; When your body (shoulder) is parallel to the turning point, quickly steer the wheel; When the front of the car is aligned with the exit of the turn, swiftly straighten the wheel to exit. Alternatively, you can observe the rearview mirror to track the movement of the rear wheels—when the rear wheels are about to pass the turning point, straighten the steering wheel.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.