Is 'OFF' in a car on or off?

1 Answers
StEverly
07/30/25 1:16am
The meaning of OFF in a car is 'off', meaning the system is turned off. In a vehicle, you can check it in the following two ways: 1. OFF is directly marked on the vehicle switch. For example, OFF on the air conditioning control panel. When the vehicle's air conditioning system is working normally, pressing the OFF button on the control panel can turn the system off. Most air conditioning control panels do not have a separate ON button. Pressing any button on the control panel can turn the system on. In other systems of the vehicle, such as the light switch, wiper switch, and cruise control switch, there will be an OFF mark. Corresponding operation to the corresponding gear position will turn off the system. 2. An OFF prompt appears in the combination instrument. For example, the ESP body stability system. When the driver turns off the system through the switch, an ESP system OFF prompt will appear in the combination instrument, and the system will no longer work.
Was this review help?
10
0
Share
More Forum Discussions

What is the reason why the air conditioning of the Baojun 730 is sometimes cold and sometimes not?

The reasons why the air conditioning of the Baojun 730 is sometimes cold and sometimes not: 1. Lack of refrigerant: This is the main reason why most vehicles encounter air conditioning failures in summer. When the refrigerant in the car's air conditioning pipes is insufficient, the pressure in the air conditioning pipes decreases, and the amount of heat removed also decreases. This can give the impression that the air conditioning is not blowing cold air. Therefore, it is essential to regularly check the refrigerant pressure during routine maintenance to avoid leaks or insufficient pressure. 2. Dirty condenser: The purpose of cleaning the radiator and condenser is mainly for heat dissipation. If the condenser is clogged with poplar catkins in spring or dust from smog, it can lead to phenomena such as excessive engine temperature or poor air conditioning. Therefore, it is necessary to check whether the radiator is clogged with many fibers after spring. When cleaning, be sure to first use an air gun to blow it clean, and then use a water gun to wash it, otherwise it will have the opposite effect, not only resulting in poor air conditioning but also increased fuel consumption. 3. Loose air conditioning compressor belt: This situation is caused by the aging of the compressor belt, which causes the compressor to slip during operation, reducing work efficiency, lowering rotational speed, and impairing the effective delivery of refrigerant. At this time, the compressor belt should be tightened. If the aging is too severe, it is recommended to go directly to a professional repair shop to replace the belt. 4. Air in the air conditioning pipes: If air is mixed into the car's air conditioning system during operation, it will affect the refrigerant's circulation, significantly reducing the cooling effect. The main cause of such problems is mostly the incomplete evacuation of air during the maintenance process.
11
1
Share

How Long Is the Validity Period of Subject 1?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the validity period of the study driving certificate after passing Subject 1 is three years, but the expiration date must not exceed the upper age limit for application. If Subject 1 is not passed, there is no validity period. Applicants must complete Subject 2 and Subject 3 within the validity period. If the exams are not completed within the validity period, the passing scores of the already completed subjects will be invalidated. Subject 1, also known as the theoretical driving test or driver theory test, is part of the motor vehicle driving license examination. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test format is computer-based, with a time limit of 45 minutes. Subject 1 consists of 100 questions, including single-choice and true/false questions, each worth 1 point. If 11 questions are answered incorrectly during the test, the system will automatically submit the test and end the exam. Subject 1 Test Content: Driving license and motor vehicle management regulations; road traffic conditions and rules; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized buses and trucks; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 Exam Notes: During the exam, candidates must pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in the lockers before entering the examination room. Upon entering, verify your identity at the assigned seat and begin the test. Ensure the camera is focused on you and follow exam discipline. If you fail the first attempt, there is a same-day retake. If you fail again, you must pay to reschedule. After completion, queue to collect your score sheet and sign it—unsigned sheets are considered invalid. There is no limit to the number of times you can schedule the Subject 1 exam. Each subject can be taken once, and if you fail, you can retake it once. If you do not take the retake or fail the retake, the exam ends, and you must reschedule. Subjects 2 and 3, however, allow only five exam attempts. If you fail the Subject 3 safe and civilized driving knowledge test, the passing scores for the road driving skills test remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official terminology (i.e., the Ministry of Public Security's Order No. 123) does not include the term "Subject 4."
4
5
Share

Which Mercedes-Benz model uses the 1.3T engine?

Mercedes-Benz models equipped with the 1.3T engine include the Mercedes-Benz A200 and the Mercedes-Benz GLB. Both the A200 and GLB are powered by a 1.3T turbocharged engine, delivering a maximum power of 120kW and a peak torque of 250Nm. The engine's performance parameters clearly indicate its strong power output. Mercedes-Benz is a German luxury automobile brand, known as the inventor of the automobile. It is renowned for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes-Benz three-pointed star has become one of the world's most famous automotive and brand logos.
17
2
Share

Does Installing a Rearview Camera Count as Vehicle Modification?

Installing a rearview camera is considered adding an auxiliary device and does not count as vehicle modification. Below is an introduction to vehicle modification: 1. Vehicle modification refers to replacing, adding, or removing components of the original factory model or altering its appearance. Reasonable and scientific modifications can make the original vehicle safer to drive and improve its performance. 2. The situation of vehicle modification in China: First, it refers to manufacturers specializing in producing modified vehicles, using nationally certified engines, chassis, or assemblies to redesign and modify vehicles that differ from the original models. Second, it involves already registered vehicles that undergo some technical modifications based on the original assemblies for specific usage purposes.
18
4
Share

How many cylinders does the Mercedes-Benz 1.3t engine have?

Mercedes-Benz 1.3t engine is a four-cylinder engine. Both the domestically produced A-Class and B-Class models from Mercedes-Benz use this 1.3t engine. This 1.3t engine was jointly developed by Mercedes-Benz in collaboration with Renault. It offers good fuel economy, along with excellent reliability and stability. The domestically produced Mercedes-Benz A-Class is equipped with three different engines: a low-power version 1.3-liter turbocharged engine, a high-power version 1.3-liter turbocharged engine, and a 2.0-liter turbocharged engine. All three engines feature direct fuel injection technology and utilize aluminum alloy cylinder heads and blocks.
10
2
Share

What model is the Volkswagen with blue needles?

Volkswagen with blue needles refers to models with blue dashboard needles, which belong to the R series of imported Volkswagen, such as the Golf R, Scirocco R, and the older R36, all featuring blue needles. Taking the Golf R as an example: it is a compact car equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116 HP, paired with a 7-speed dual-clutch transmission. The Golf R measures 4296mm in length, 1788mm in width, and 1471mm in height, with a wheelbase of 2636mm and a top speed of 200 km/h. The car is a 5-door, 5-seat hatchback with a fuel tank capacity of 51L and a trunk capacity of 380L.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.