Is Mobil Super 1000 a Semi-Synthetic Engine Oil?

How to use the autohold function in Volkswagen Tiguan?

autohold function refers to the electronic parking brake, whose main role is to ensure the electronic parking brake is engaged in a timely manner. This function can be manually activated or set to activate automatically by the vehicle. Below are the instructions for using the autohold function in Volkswagen Tiguan: 1. It works automatically when activated; if it is turned off, you need to manually engage the electronic parking brake. 2. If you wish to disable this function, selecting manual activation requires operation through the vehicle's computer. The original electronic parking brake function of the car is set as default. It activates automatically after the engine starts, so when the car comes to a complete stop, this function will engage on its own. To release the parking state, simply press the accelerator pedal.

9

3

Share

Where is the engine number located on a Jetta?

For the Volkswagen Jetta, the engine number is located at the junction between the engine and the transmission, near the right side of the engine block. Below are specific details about the engine number: 1. The car engine number is like the engine's ID card, with uniqueness and certainty. The same engine number will not appear during the vehicle's use until it is scrapped. Generally, when registering and licensing the vehicle, it is necessary to make a rubbing of the engine number and the chassis number. The registered vehicle has legal effect, preventing illegal modifications and theft. 2. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, industry or company conventions, and the engine's attributes. It represents information about the engine's manufacturer, specifications, performance, characteristics, technology, purpose, and production batch, such as fuel type, number of cylinders, displacement, and static braking power.

6

3

Share

What reference points to observe when exiting a parallel parking space?

When exiting a parallel parking space, you need to observe whether the right front corner of the hood touches the roadside line on the right. If it does, you should straighten the steering wheel. Additionally, check if the left one-third point of the hood aligns with the yellow line. If they align, you should promptly turn the steering wheel to exit. After hearing the voice prompt, press the clutch and brake, shift to first gear, turn on the left turn signal, fully turn the steering wheel, and slowly exit the parking space. When you see the right front corner of the hood touch the roadside line on the right (this is the first reference point), straighten the steering wheel and continue moving forward. When the left one-third point of the hood aligns with the yellow line (this is the second reference point), turn the steering wheel one full turn to the right. Allow the vehicle to navigate around the corner of the parking space and exit. Once the car body is parallel with the road, straighten the steering wheel to the left and exit the parallel parking test area. During the parallel parking exit process, pay attention to controlling the clutch. The speed should be slow, but you must not stop midway. The timing of turning the steering wheel must be precise; otherwise, missing the right moment could easily result in touching the line. It is essential to maintain a slow and steady speed with consistent clutch control. When reversing into the parking space for the first time and turning the steering wheel fully to the right, wait until the left corner of the parking space disappears from the right rearview mirror before fully turning the wheel. Otherwise, the front wheels might touch the line during reversing or exiting. Note the following penalty points for parallel parking exit: touching the corner when exiting deducts 10 points; the tires touching the lane boundary line during movement deducts 10 points; stopping midway results in failure.

17

5

Share

How to Open the Front Hood of a Bora?

Bora hood switch is located near the driver's left foot, a palm-sized component. Pull it backward, then reach to the middle of the hood and push the latch to the right to open it. Below is a detailed introduction to the functions of the hood: 1. Airflow guidance. The hood's shape effectively adjusts the direction of airflow relative to the car's movement and reduces aerodynamic resistance, minimizing the impact of airflow on the vehicle; 2. Protection for the engine and surrounding components. Enhanced hood strength and construction prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle's normal operation; 3. Aesthetics. The hood is a key component of the car's exterior appearance; 4. Driver visibility assistance. The hood's shape adjusts the direction and form of reflected light, reducing glare for the driver; 5. Accident prevention. The hood acts as a shield, effectively blocking damage caused by explosions; 6. Special-purpose platform. In special vehicles, high-strength hoods serve as work platforms for support.

19

5

Share

What to Do When a Mazda Car Key Battery Dies?

When a Mazda car key runs out of battery, you can simply go to a key duplication shop or a 4S store to replace the battery inside the key, or you can buy a battery and replace it yourself. The car key itself contains a battery, which typically has a lifespan of 2 to 3 years. Once the battery is depleted, it needs to be replaced. Below are the steps on how to replace the battery: 1. The method for replacing the battery in a car key is generally similar. Most remote keys come with a mechanical key, and some keys may have the mechanical part folded or hidden. If it's a folding type, after flipping out the mechanical key, you can see the latch at the folding position. Use a tool to press the latch, and you can then remove the outer shell. 2. If it's a hidden mechanical key, the small key can also be used to pry open the key. Once the outer shell is removed, take out the old coin battery and check if the model of the new battery matches the old one. Then, install a new coin battery that meets the specifications. Pay attention to the installation position during assembly and ensure it is not installed backward.

18

1

Share

Where is the air conditioning filter element of Ford Transit?

The air conditioning filter element of Ford Transit is located behind the glove box. Below are the specific details about Ford Transit: 1. Exterior: Ford Transit is a light passenger vehicle. Its length, width, and height are 5782mm, 2000mm, and 2360mm respectively, with a wheelbase of 3750mm. It comes in four seating configurations: 6, 7, 15, and 17 seats, offering ample space and easy modification, making it suitable for conversion into a motorhome. 2. Interior: The seats are ergonomically designed and made of genuine leather. It is equipped with a high-power split air conditioning system, a car refrigerator, intelligent welcome pedals, and a high-rigidity load-bearing body, significantly enhancing ride comfort. 3. Powertrain: Ford Transit is powered by a 2.2T PUMA diesel engine, delivering a maximum horsepower of 135 and a maximum torque of 350N·m, paired with a German GFT 6-speed transmission. This engine utilizes the latest generation of high-pressure common rail electronic control technology, improving engine efficiency and demonstrating excellent operability and safety.

17

1

Share

Is Mobil Super 1000 a Semi-Synthetic Engine Oil?

How to use the autohold function in Volkswagen Tiguan?

Where is the engine number located on a Jetta?

What reference points to observe when exiting a parallel parking space?

How to Open the Front Hood of a Bora?

What to Do When a Mazda Car Key Battery Dies?

Where is the air conditioning filter element of Ford Transit?

How many points are deducted for the side of the vehicle crossing the line?

Will points be deducted if the rear of the car crosses the line during parallel parking?

Which Turn Signal to Use for Parallel Parking?

What are the reasons for the car body crossing the line during parallel parking?