Do not press the clutch and accelerator simultaneously. Pressing the clutch disengages the engine's power transmission, putting the engine in a no-load state. At this point, pressing the accelerator will cause the engine speed to suddenly increase, and you may even hear the sound of revving. When shifting gears, always release the accelerator first before pressing the clutch. The clutch in a car serves to engage and disengage the engine from the wheel transmission. In other words, when the clutch is pressed, the engine's transmission is disconnected from the wheels, and the engine's power is not transmitted to the wheels. If the accelerator is not released after pressing the clutch, the engine continues to work, which is not only useless but may also damage the engine. The correct coordination between the clutch and accelerator is as follows: 1. Starting: Press the clutch with your left foot, press the brake with your right foot, shift into first gear, release the handbrake, then slowly lift the clutch with your left foot. When the car starts to shake slightly, move your right foot to the accelerator pedal and gently apply some throttle while continuing to release the clutch. The car will start smoothly, and once the clutch is fully released, apply more throttle to prepare for shifting. 2. Upshifting: Release the accelerator pedal, quickly press the clutch pedal with your left foot, shift the gear lever to the appropriate gear, release the clutch pedal, and while releasing the clutch, gently press the accelerator with your right foot. 3. Downshifting: First, press the brake to slow down, lightly press the accelerator with your right foot, lift your right foot, quickly press the clutch pedal, shift the gear lever to the appropriate gear, release the clutch pedal, and while releasing the clutch, gently press the accelerator with your right foot.
