Is it okay to engage the P gear without pulling the handbrake?

1 Answers
DeAaliyah
07/30/25 5:55am
Whether to pull the handbrake when engaging the P gear depends on the terrain: 1. On relatively flat ground, you can engage the P gear without pulling the handbrake; 2. On uneven ground, you need to pull the handbrake after engaging the P gear. The car gears include: 1. P gear is the parking gear and starting gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the forward gear, also known as the drive gear; 5. L gear is the low-speed gear; 6. S gear is the sport mode; 7. OD gear is the overdrive gear. The steps for parking a car are: 1. Press the brake to stop; 2. Shift the gear from D to N; 3. Pull the handbrake and turn off the engine; 4. Release the foot brake, but do not turn off the power, to ensure the car is completely stopped under the handbrake; 5. Press the foot brake and shift the gear from N to P; 6. Release the foot brake; 7. Turn the key back, turn off the power, and remove the key.
Was this review help?
20
3
Share
More Forum Discussions

What to Do If You Lose Your Driving Test Subject 4 File?

Bring your original ID card and other required documents to the vehicle management office to apply for a replacement. At the same time, fill out the "Motor Vehicle License and Certificate Application Form" and pay the handling fee. Log in to the local vehicle management office website. If you already have an account, you can directly log in, print, and fill out the "Motor Vehicle License and Certificate Application Form". Prepare your original ID card, copies, and other proofs. Wait for the courier to collect your documents, materials, and fees.
10
5
Share

What to Do When Water Leaks Under the Passenger Seat When the Air Conditioner Is On?

Some cars have poor-quality drainage pipes that are prone to aging and loosening, causing water to leak under the passenger seat when the air conditioner is on. In this case, the drainage pipe needs to be replaced. If the air conditioner was not installed securely, it may shift abnormally after prolonged use, causing the drainage pipe to move and making drainage difficult. Condensation on the pipes. If the insulation material on the pipes is of poor quality or too thin, condensation is likely to form when the refrigerant passes through.
16
3
Share

How to use CarPlay in Nissan X-Trail?

All functions in CarPlay are linked with the phone, and all operations can be input through Siri. Before using CarPlay, you need to prepare an original USB cable. Connect the data cable to the car's USB port. If the CarPlay interface does not appear on the car's main screen, click the CarPlay icon on the phone to start the system.
10
2
Share

How to Unclog the Sunroof Drainage Outlet on a Mondeo?

Take an air pump gun and aim it at the drainage holes of the two front drainage pipes inside the sunroof. Use high-pressure airflow to blow through the drainage pipes. Remember to block with a rag and ensure the air pressure is not too strong, as excessive force may cause the rubber connectors and drainage pipes to detach. Flushing the drainage pipes with a syringe can help clear blockages. Use the syringe to extract water from the sunroof drainage channel to prevent water from flowing into the vehicle interior.
15
2
Share

How to Adjust the Time on the Small Screen of the Older Peugeot 408?

The time can be adjusted directly on the center console. There are three buttons on the left side of the center console: the top one is the reset button, the middle is the option button, and the bottom is the adjustment button. Press the middle button to adjust to DISPLAY-ADJUST. The first number is the hour. Press the bottom button and then the middle button to confirm. After selecting the MENU item, press the OK button. Use the left and right buttons to adjust the numbers if they are incorrect, then press OK to complete the adjustment.
18
0
Share

How to Remotely Close the Windows of a Lynk & Co Car Using a Mobile Phone?

Pressing and holding the unlock button on the key fob will lower the windows, while pressing and holding the lock button will raise them. Remote start, as the name suggests, means remotely starting the engine or motor via the key fob. The principle is quite simple: the vehicle starts the engine or motor based on the signal received from the key fob. Typically, after remote starting the engine or motor, the vehicle will operate continuously for ten minutes. If no further instructions are received, it will automatically shut off.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.