Is It Normal for the Front of a Car to Be Very Hot?

1 Answers
LaBethany
07/30/25 6:20am
It is normal for the front of a car to be very hot. The specific reasons are as follows: 1. Reasons: When the engine is working, the external temperature can reach above 90°C, and the exhaust pipe temperature can exceed 500°C. Additionally, the insulation layer and underbody panels on the hood block heat dissipation. 2. Automatic Cooling: If the engine temperature gets too high, the fan will automatically turn on to continuously cool the engine. Once the engine temperature decreases, the fan will stop automatically. Extended Information: 1. Car Bumper: The car bumper consists of three parts: the outer panel, cushioning material, and crossbeam. It not only enhances the vehicle's appearance but also absorbs and mitigates external impacts, protecting the front and rear of the car body. 2. Car Engine Hood: While ensuring engine heat dissipation, the hood also provides excellent sound insulation, offering great ride comfort even when the engine is running at high speeds. Moreover, the engine hood protects the motor, battery, and various wiring inside the compartment from dust and water.
Was this review help?
18
5
Share
More Forum Discussions

Why Does the Car's Antifreeze Keep Decreasing in Summer?

Summer car antifreeze keeps decreasing because the high temperatures in summer cause the antifreeze to expand in volume and leak more easily. Here are the relevant explanations: 1. Main functions: Antifreeze and cooling. One characteristic of antifreeze is its very high boiling point and very low freezing point. This makes it ideal for use in a car's engine. In summer, it primarily serves to cool the engine, while in winter, it mainly prevents freezing. 2. Reasons for decrease: First scenario: Within a normal mileage range, the antifreeze decreases by a small amount. In this case, the reduction is normal. Since the antifreeze is in contact with the engine, when the engine operates, it generates extremely high temperatures, which also raise the antifreeze's temperature, sometimes even causing it to vaporize. Generally, when a liquid's temperature rises or it vaporizes, its volume expands. If this happens in a confined space, the pressure increases. At this point, a pressure relief hole in the antifreeze cap opens, allowing some antifreeze to escape, maintaining appropriate pressure before the hole closes again. In this situation, there's no need to worry. Normal driving is unaffected. Second scenario: The antifreeze decreases very rapidly. Typically, antifreeze decreases faster in summer due to the naturally high temperatures, which make the antifreeze more prone to expansion and leakage. If the antifreeze is found to be decreasing quickly in winter as well, it's advisable to visit a professional 4S shop for inspection. There might be damage to related components causing the antifreeze to leak. If the antifreeze leakage is noticeably fast in summer, it's also a cause for concern. Similarly, an inspection is necessary to identify and address the issue.
4
2
Share

Does Driving Fast in M1 Gear Damage the Car?

Driving fast in M1 gear can damage the car. Below is an introduction to the reasons why driving fast in M1 gear can harm the car, the meaning of the M1 gear, and the situations in which the M1 gear is used: Reasons why driving fast in M1 gear can damage the car: Using M1 gear for extended periods at high speeds can cause the transmission oil temperature to rise, which may lead to overheating and damage to the transmission. Meaning of the M1 gear: "M" indicates that the transmission is in manual mode, and "1" means the transmission is in first gear. Many automatic cars have an M gear, which is essentially the manual mode of an automatic transmission. After shifting into M gear, the driver can control the transmission to shift up or down. Some cars with a manual-automatic transmission require the use of the gear lever to shift up or down after engaging M gear. Usage scenarios for M gear: Overtaking: Switching to manual M gear and downshifting to first gear allows for quick overtaking, which is much faster than pressing the accelerator deeply in D gear; Uphill driving: On some steep slopes, if the car is in D gear, it may not lock into first gear. Using M gear allows the car to lock into first or second gear, making uphill driving much easier; Rainy or snowy slippery roads: In D gear mode, the car defaults to starting in first gear, which can easily cause wheel spin on slippery surfaces. Using M gear to shift into second gear reduces torque and effectively minimizes the chance of wheel spin.
7
0
Share

How to Use Car Air Conditioning Properly?

When using the car air conditioning, it's better to open the windows to expel the air before turning on the AC. Here is an introduction to car air conditioning knowledge: 1. Introduction: The car air conditioning system, referred to as car AC, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue. 2. Turn off AC in advance: When the A/C button is turned on, the car's cooling equipment starts operating, and the moisture generated during the operation of these devices, combined with the hot and stuffy environment of the engine compartment, creates an ideal condition for mold and bacteria to grow. Over time, the air conditioning can produce odors, such as sour smells. Therefore, it's advisable to turn off the A/C a little before reaching the destination and then increase the fan speed slightly to allow the air to dry out the ducts, making it harder for mold to grow.
9
3
Share

How to Adjust Scattered Headlight Beams to Focus?

To adjust scattered headlight beams, use a screwdriver to turn the screw rod behind the lamp bracket to adjust the beam until it reaches the focused position. Below are the specific reasons why car headlights scatter and fail to focus: Improper Bulb Position: Scattered headlight beams indicate that the bulb is not in the center of the lamp cover, requiring readjustment of the headlight height. First, check if the headlight base is loose. Inconsistent LED Light Emission Points: If the LED light emission point does not match the original car's emission point, it can cause the light to scatter. Adjust the bulb to align the emission point with the reflection direction of the original car's reflector to achieve a focused beam.
15
5
Share

Is the Clearance Date at 0:00 or 24:00?

The clearance date for a driver's license is at 0:00 on the expiration day. For example, if the initial issuance date is August 1, 2018, the point clearance date will be at 0:00 on August 1, 2019. According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' the demerit point cycle for a driver's license is 12 months. If a motor vehicle driver accumulates fewer than 12 demerit points within a cycle, has paid all fines, and resolved all violations, the points will be cleared, and the next cycle will start with 12 points again. Otherwise, the points will carry over to the next cycle. For instance, if 6 points were deducted in the previous cycle and the violations and fines were not resolved by the deadline, the driver will only have 6 points available for deduction in the next cycle. If a driver accumulates 12 or more demerit points within one cycle, a Class C license will be temporarily suspended by the traffic management authorities. The driver must attend traffic safety laws, regulations, and related knowledge training and pass an exam within 15 days. Successfully passing the exam will clear the points and return the license; otherwise, the driver must continue training and retake the exam. For Class A and B licenses, the driver will face a downgrade penalty. The vehicle management office will revoke the highest permitted vehicle class, and the driver must complete the downgrade and license renewal process within 30 days.
12
1
Share

Can I use my own photo for the driver's license?

You can use your own photo for the driver's license, but you need to ensure that the photo passes the inspection by the relevant authorities. The driver's license photo can only be changed when applying for or replacing the license. If you think the photo on your driver's license is unflattering, you can apply for a replacement at the vehicle management office (even if the license is not lost). At that time, you can carefully select a good photo and complete the procedure at the vehicle management office by paying the processing fee. Requirements for driver's license photos: Within the first 6 months of applying for a motor vehicle driver's license, a straight-edged, front-facing, bareheaded, single-person, half-length ID photo of yourself is required. The image should be clear, with rich layers, natural expression, and no obvious distortion. The background color should be white, and you should wear dark-colored clothing. The photo size should be 32mm x 22mm, with a head width of 14mm to 16mm and a head length of 19mm to 22mm. Girls should not have their hair loose, and boys' hair should not be too long. The expression should be natural. People with long hair should expose both ears, and the head and face should not be tilted, sideways, overly made-up, or have accessories that affect facial recognition. Location and precautions for taking driver's license photos: Vehicle management offices or outside photo studios with legitimate business licenses. If taking photos at an outside studio, simply inform the studio that you need "photos for a driver's license," and the studio will follow the specifications accordingly. Just follow the studio's instructions to complete the photo session.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.