Is It Normal for the Display Screen of Baojun 560 to Stay On After Turning Off the Engine?

[SanIsabela]

It is not normal for the display screen of Baojun 560 to stay on after turning off the engine. Reasons for the screen staying on: There may be a short circuit in the wiring of the vehicle's navigation host or an issue with the program. Solutions: If the navigation screen remains on after turning off the engine, you will need to use a car diagnostic tool to access the SMK system and read the data stream. If the data stream shows that both "ACC" and "ACC input circuit and battery circuit (when the engine is off)" are in the ON state, it indicates a short circuit. The cause of the short circuit is likely a problem with the power supply module, and it is necessary to promptly inspect and repair the relay.

[Caleb]

When I first drove the Baojun 560, I also encountered the situation where the display screen remained on after turning off the engine. Usually, this is a normal design feature, such as a delayed shutdown function that keeps the screen flashing for a while before automatically cutting power to protect the electrical system or wait for operations to complete. If it doesn’t turn off after a minute or two, there might be an issue, like a blown fuse, a short circuit, or a module malfunction. I recommend observing it for a day first. If the problem persists, it’s best to visit a repair shop to get it checked, to avoid draining the battery and affecting the engine start. I’ve often seen this phenomenon during hot summer temperatures, mostly due to the system’s automatic adjustments. Don’t rush to repair it—try turning the key on and off a few times to determine if it’s a temporary glitch or an actual malfunction.

[SanElizabeth]

Having worked on cars for many years, I've dealt with numerous issues like the 560. The display staying on after turning off the engine is usually a normal delayed shutdown setting. However, if it doesn't turn off for too long, it's a sign of malfunction. Common causes include blown fuses, aging relays, or software glitches. Start by checking the condition of the corresponding fuse in the fuse box. If that's fine, you might need to replace the module. As a repair suggestion, don't wait indefinitely for it to turn off. If it stays on for more than five minutes after shutting down, stop and inspect it to avoid draining the battery and causing additional trouble. It's best to have technicians test the circuit during regular maintenance to ensure reliability.

[Beckett]

Buddy, don't worry about this small issue. It's quite normal for the Baojun 560 display to stay lit for a few minutes after turning off the engine. At worst, it'll just drain the battery a bit. Being frugal myself, I'd suggest manually pressing the center console button or checking for loose connections if it stays on. Usually no repair is needed. If you're concerned about battery drain, just remember to park properly and lock the doors to let the system handle it automatically. My old budget car had this happen several times too - mostly just system delays, nothing serious. Just keep driving unless it becomes a real problem, then consider a shop inspection.

[VonCarmen]

As a family car enthusiast, I believe that a bright display doesn't affect driving safety, but if it stays on after the engine is turned off, it can drain the battery and potentially cause starting issues later. Normally, a delayed shutdown design is fine, but occasional freezing might be due to poor contact. I recommend regular maintenance as a preventive measure, such as cleaning the slots to avoid dust interference. Normally, the screen should turn off automatically within minutes. If it doesn't, promptly check the circuit to prevent minor issues from turning into major repairs. Safety first is always the right approach.

[Myron]

From an electronic perspective, it's normal for the 560 display to remain lit for a short delay after turning off the engine, similar to a standby mode that protects hardware or processes data. However, if it stays on for an extended period, it's usually caused by a software bug or sensor malfunction. It's recommended to check if the vehicle's software is up to date or have the system diagnosed and refreshed at a 4S shop. With some technical knowledge, I've found that restarting the system can be effective, but professional repair is advised to prevent electronic control faults from spreading and affecting other electronic components like the navigation system.