Is It Normal for Both Pipes of the Car Air Conditioner to Be Hot?

1 Answers
StLouis
07/30/25 6:27am
It is abnormal for both pipes of the car air conditioner to be hot. The reasons for both pipes being hot are as follows: 1. Reason one: The compressor lacks refrigerant. 2. Reason two: The compressor is out of oil. 3. Reason three: The solenoid valve fails to switch. 4. Reason four: System malfunction. Relevant information about the car air conditioner is as follows: 1. Car air conditioner electromagnetic clutch: It is a power transmission device between the car engine and the car air conditioner compressor. The car air conditioner compressor is driven by the car engine through the electromagnetic clutch. 2. Composition: The car air conditioner electromagnetic clutch generally consists of three parts: the pulley assembly, the coil assembly, and the drive plate assembly.
Was this review help?
8
0
Share
More Forum Discussions

Is a Driver's License Required for Electric Vehicles with Green Plates?

Electric vehicles with green plates do not require a driver's license because they are not motor vehicles. However, they do require an electric vehicle driving permit and license plate. The driver must be at least 16 years old. For safety, it is advisable to wear a helmet when riding. Below are relevant details about electric vehicles: Introduction 1: Electric vehicles must be registered and licensed to operate on the road. Owners need to bring valid identification, vehicle certification, purchase receipts, and other documents to the traffic management department for registration. After inspection, the vehicle can be licensed and legally driven. Unregistered electric vehicles are not allowed on the road. Introduction 2: Since electric vehicles are not motor vehicles, traffic regulations require them to use non-motorized lanes. Motorized lanes refer to the main road, while non-motorized lanes are designated lanes on the right side of the road, between the first lane and the sidewalk, or lanes marked on the sidewalk.
5
1
Share

Why is it not recommended to use matte film for cars?

There are several reasons why matte film is not recommended for cars: Reason 1: Because matte film is considered a color-changing film, changing the color of the car body is a legal act that requires an application for modification at the local vehicle management office. Reason 2: Applying transparent film is not illegal, as it is a part of car beauty treatments. Strictly speaking, applying color-changing film is also not an illegal act. In most cities, the process of changing the car body color with color-changing film is similar to that of repainting. Reason 3: In principle, changing the car body color can be applied for through formal procedures, but some sensitive colors are legally prohibited. At the very least, the car body color cannot be changed to the specific colors and patterns of police cars, taxis, fire ambulances, etc. Additionally, general matte, sandblasted, high-gloss, and other textured films can be changed, but overly exaggerated color schemes or tactile textures are uncertain. Moreover, chrome-colored car body films are clearly illegal and not allowed for application for car body color changes.
13
4
Share

Is it called idling when in first gear without giving gas?

Being in first gear without giving gas is not called idling. Below is some introduction about idling: 1. Introduction: Idling refers to the operation of the engine under no load, where it only needs to overcome the frictional resistance of its internal components and does not output power externally. The minimum speed at which the engine maintains stable operation is called idling, which is one of the five basic operating conditions of an engine. For an engine with good performance, its idling speed is generally between 550-800 RPM. 2. Function: The idling speed can be adjusted by changing the throttle opening size, the amount of fuel supplied at idle, etc. Generally speaking, the best idling speed is the lowest speed at which the engine does not shake within the idling range and has good acceleration performance.
10
5
Share

Which brand does the DVVT engine belong to?

DVVT engines are produced in Japan. Their core technology is called VVT, and each automobile manufacturer has its own improvements. The D-VVT engine adopts a principle similar to that of the VVT engine, utilizing a relatively simple hydraulic cam system to achieve its functions. The features of the DVVT engine are introduced as follows: Introduction 1: DVVT stands for Dual Variable Valve Timing, which refers to the variable timing technology for both intake and exhaust valves. Engines equipped with DVVT technology are more efficient, energy-saving, and environmentally friendly compared to those using only intake valve timing technology, which is more common in the current market. Introduction 2: DVVT technology can reduce fuel consumption by 5%, while increasing power output by 10%, achieving the power performance of a 2.0L displacement engine. It meets the National IV emission standards and optimizes the air-fuel ratio of the gasoline-air mixture in the combustion chamber, significantly improving idle stability for better comfort. Introduction 3: The DVVT engine represents the most competitive new mainstream technology, a comprehensive upgrade based on VVT engine technology. It has been applied in high-end models such as the BMW 325 DVVT. Although the principle of the DVVT engine is similar to that of the VVT engine, the VVT engine can only adjust the intake valve, whereas the DVVT engine can adjust both intake and exhaust valves. The 1.8L DVVT engine can also achieve linear adjustment of valve timing within a certain range according to different engine speeds, featuring excellent characteristics of high torque at low speeds and high power at high speeds.
3
4
Share

Does converting a car to run on natural gas harm the engine?

Converting a car to run on natural gas can harm the engine. The potential damages to the engine from such a conversion are as follows: Burning out the engine: It can burn out the valve working surfaces and valves of the engine, leading to excessively small valve clearances, which affects the engine's performance. Spark plugs are prone to being pierced: Due to the higher combustion temperature of natural gas, spark plugs are particularly susceptible to being pierced. If slight misfiring occurs when using natural gas, it usually indicates that the spark plug has been pierced. Generally, spark plugs should be replaced after 30,000 to 40,000 kilometers of use. Catalytic converter burning out or breaking and clogging: The catalytic converter material in many gasoline-to-natural gas converted vehicles may disappear without any apparent reason. This happens because the engine might experience backfiring during operation, which can easily crack the catalytic converter, causing it to be expelled out of the vehicle through the exhaust pipe.
16
5
Share

How many subjects are required to upgrade from C3 to C1?

To upgrade from a C3 to a C1 driver's license, you need to pass four subject tests. Unlike upgrading from C2 to C1, which only requires passing Subject 2 and Subject 3 after the new regulations implemented on April 1, 2022, upgrading from C3 to C1 requires passing all subjects, similar to taking the test from scratch. These include theoretical knowledge (Subject 1), field driving skills (Subject 2), road driving skills (Subject 3), and civilized driving theoretical knowledge (Subject 4). Specific test items are as follows: Subject 1: Road traffic rules, traffic signals, handling of road traffic safety violations and accidents, regulations on the application and use of motor vehicle driver's licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules. Subject 2: Reverse parking, parallel parking, curve driving, right-angle turns, and stopping and starting on a slope. Subject 3: Preparation before driving, starting, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. Subject 4: Safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, knowledge on preventing secondary accidents, and first aid knowledge for injured persons. C1 driver's license permitted vehicle types: Small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles. C3 driver's license permitted vehicle types: Low-speed cargo vehicles (originally four-wheel agricultural transport vehicles). According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the following conditions must be met to upgrade from C3 to C1: The applicant must be between 18 and 70 years old; Must have held a C3 driver's license for at least one year; No full-score record on the C3 driver's license during the current scoring cycle and the most recent scoring cycle before application; The application for adding permitted vehicle types must be submitted at the place where the current motor vehicle driver's license was issued; No drunk driving or driving under the influence of alcohol within the last three scoring cycles.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.