Is it necessary to hire a professional to inspect the car when buying from a 4S store?

1 Answers
IvanLee
07/28/25 3:28pm
When purchasing a car from a 4S store, you can hire a professional to inspect the vehicle. This approach can provide greater peace of mind, ensuring that the purchased vehicle is brand new and avoiding future usage issues. The 4S store will not refuse this practice, as it is a very normal inspection process for verifying the condition of the vehicle. Below is an extended introduction: Documents required for purchasing a car: In regions without purchase restrictions, only an ID card is needed to buy a vehicle. In cities with purchase restrictions, you must provide a license plate quota to purchase a vehicle; otherwise, the sale cannot proceed. Additionally, if the purchased vehicle is not registered locally, only an ID card is required to prove its origin.
Was this review help?
10
0
Share
More Forum Discussions

Can You Leave the Key Behind with Bluetooth Key?

With a mobile Bluetooth key, you don't need to carry the car key. Here is an introduction to Bluetooth key-related content: 1. How to enable the Bluetooth key: First, you need to download your vehicle's control app on your phone. After entering the app, you need to input the vehicle model, chassis number, and owner's phone number for binding. Then, the owner can enter the vehicle control interface, which has corresponding function switches. The usage method is similar to that of a remote key—simply press the relevant buttons to use it. 2. Notes: The advantages include being more intelligent, convenient, and comfortable, and it can also serve as an anti-theft measure. When the owner forgets to lock the car door after getting out, the car system will recognize that the owner has left and automatically lock the door to prevent theft. The disadvantages include interference or shielding that may prevent the recognition of the car's smart key, making it impossible to automatically open the door or start the vehicle.
5
3
Share

What is the maximum ampere for the Jeep Cherokee battery?

The Jeep Cherokee battery model is 60ah55d23l, with a capacity of 60Ah. The charging current for an automotive battery is one-tenth of the battery capacity (10-hour charging rate). For example, a 24AH battery can be fully charged in 16 hours with a 1.5A current. The inspection and handling methods for automotive battery leakage are as follows: 1. First, conduct a visual inspection to identify the acid leakage location. 2. Remove the cover to check for any traces of acid leakage around the valve, then open the valve to observe if there is any flowing electrolyte inside the battery. 3. If no abnormalities are found after the above steps, perform an airtightness test by placing the battery in water and inflating it with pressure. Observe if any bubbles are generated and escape from the battery, as bubbles indicate acid leakage. 4. During the charging process, observe if any flowing electrolyte is produced. If there is flowing electrolyte during charging, it should be completely extracted.
14
1
Share

Is the MG6 a domestic or joint-venture car?

The MG6 is a domestic car, and it is a compact sedan under the MG brand. The MG6 is equipped with two types of engines: a low-power version 1.5-liter turbocharged engine and a high-power version 1.5-liter turbocharged engine. Below is additional information about the MG6: 1. The dimensions of the MG6 are 4704 mm in length, 1848 mm in width, and 1466 mm in height, with a wheelbase of 2715 mm. 2. The high-power version 1.5-liter turbocharged engine delivers 181 horsepower and a maximum torque of 285 Nm. This engine reaches its maximum power at 5600 rpm and its maximum torque between 1500 to 4000 rpm. 3. The low-power version 1.5-liter turbocharged engine produces 169 horsepower and a maximum torque of 250 Nm. This engine achieves its maximum power at 5500 rpm and its maximum torque between 1700 to 4300 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
4
3
Share

What is the method to replace the battery in an XTS key?

Here is the method to replace the battery in a Cadillac XTS key: 1. Remove the mechanical key by pressing the switch and then pulling it upward. 2. Pry open the key along the edge gap. 3. After opening, you will see the key divided into two halves, one side containing the integrated circuit board and the other side holding the battery. 4. Remove the old battery and install the new one. 5. Reassemble the key. Below are some extended functions of the remote key: 1. Vehicle locator: Press the button with the horn symbol on the remote, and the car will sound an alarm within an effective range of 40 meters. 2. One-touch window closing: Press and hold the lock button on the remote to automatically close all windows. 3. Automatic trunk opening: Press and hold the trunk unlock button or press it twice in succession to automatically open the trunk.
6
3
Share

What is the Principle and Significance of Wind-Powered Cars?

The following are the principle and significance of wind-powered cars: 1. Principle of wind-powered cars: Wind-powered cars convert the torque rotation of propeller blades into forward air thrust, propelling the car forward. Therefore, a small fan can be installed at the back of a toy car, but it must be ensured that the fan blows backward; otherwise, the car will move in reverse. Let's take a look at wind-powered cars. They refer to cars that can automatically travel according to the direction of the wind. The driver can also manually adjust the "sail" at the rear of the car through special configurations in the cockpit to change the vehicle's direction. 2. Power supply method: Mainly uses lithium batteries as the energy source. It is worth mentioning that along the way, it primarily relies on wind and kites as driving forces. Wind-powered cars mainly depend on wind and kites for propulsion. This convertible car, with a racing-style design, features a carbon fiber body and bicycle tires. Even when equipped with batteries, the total weight is only about 204 kilograms, and without batteries, the body weighs merely 82 kilograms, significantly lighter than conventional cars. Moreover, it can reach speeds of over 88 kilometers per hour.
8
2
Share

Where is the air conditioning filter located in the Tiguan?

The air conditioning filter is located below the glove compartment on the passenger side, near the center console. The air conditioning filter is used to filter the quality of indoor or outdoor intake air. The specific location and cleaning method are as follows: 1. Open the glove compartment of the Volkswagen Tiguan. 2. Remove the clips on both sides of the glove compartment. 3. Squeeze both sides of the glove compartment to remove it. 4. Open the air conditioning filter cover of the Volkswagen Tiguan. 5. Remove the air conditioning filter inside. 6. Use a vacuum cleaner to remove dust and dirt. Below is additional information about the air conditioning filter: 1. The air conditioning filter is used to filter the quality of indoor or outdoor intake air. 2. The air filter is part of the engine intake system, filtering the quality of the engine intake air. The functions of the two are different. The replacement cycle for the engine air filter is based on air quality and mileage, while the replacement cycle for the air conditioning filter is once a year or every 20,000 kilometers.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.