Is it necessary to buy a steering wheel cover?

What is the difference between SL and SN oil grades?

SN oil grade is higher than SL. The API grade represents the quality level of engine oil. It uses simple codes to describe the working capability of engine oil. Oil grades are classified into SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, and SN levels. The later the letter, the higher the grade, with SN being the highest grade of oil currently available. Below is a related introduction: 1. Introduction to engine oil: Engine oil, also known as engine lubricant, has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce wear, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is often referred to as the 'blood' of a car. 2. Composition of engine oil: Engine oil consists of base oil and additives. Base oil is the main component of lubricating oil, determining its basic properties, while additives can compensate for and improve the shortcomings of the base oil's performance, granting it new properties. Additives are an important part of lubricating oil.

13

2

Share

How to Solve the Problem of High Fuel Consumption?

High fuel consumption can be addressed by inspecting and repairing car components. Here are specific methods to solve high fuel consumption: 1. Clean engine carbon deposits: Excessive carbon deposits in the engine are a major cause, primarily due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. After cleaning, it is advisable to drive at high speed for a while, which helps increase exhaust volume and allows stronger airflow to remove larger carbon deposit particles. 2. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio in the engine. Once damaged, it can cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. If the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the sensor should be replaced. 3. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they can become dirty and affect performance, sending incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits.

1

Share

How to solve the problem of only NO exceeding the standard?

If the NO in the exhaust gas exceeds the standard significantly, the first step is to clean the cooling system and the heat dissipation system, and even the lubrication system. Below are the relevant introductions about exhaust gas: 1. Control the flow of cleaning agent: The flow of cleaning agent should be controlled to the point where the engine idles with slight vibration as the best condition. If the engine vibrates severely during the cleaning process, the flow of cleaning agent should be reduced immediately. Some 4S shop technicians rush the process by injecting a large flow of cleaning agent into the engine quickly, which not only damages the engine but also reduces the cleaning effect. 2. Cleaning the three-way catalytic converter: The three-way catalytic converter should be cleaned and maintained every 30,000 kilometers, and those with the conditions can clean it every 10,000 kilometers. Under normal maintenance conditions, the service life of the three-way catalytic converter is between 150,000 kilometers and 200,000 kilometers before replacement is needed.

19

4

Share

Does Changing the Air Filter on a Panamera Require Removing the Bumper?

Changing the air filter on a Panamera requires removing the bumper. The function of the air filter and the method for replacing it are as follows: Function of the Air Filter: The air filter consists of a filter element and a housing, with the filter element responsible for filtering the air. It removes dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders. However, in many areas, the air contains high levels of dust and sand, which can easily clog the air filter. This can lead to symptoms such as difficulty starting the engine, sluggish acceleration, unstable idling, and increased fuel consumption. In such cases, replacing the air filter becomes necessary. Method for Replacing the Air Filter: Open the car's engine hood and locate the air filter housing. Some housings are secured with screws, while others use clips. If screws are used, a screwdriver is needed to open the housing. Remove the old filter element from the housing, replace it with a new air filter, and secure the clips.

10

1

Share

What is the normal tire pressure for the Changan CS75?

The normal tire pressure for the Changan CS75 is between 2.4bar and 2.5bar. Specific requirements can be found on the fuel tank cap, the side of the driver's door, or in the user manual. Both underinflated and overinflated tires can affect the tire's lifespan and fuel consumption. Overinflation causes the vehicle's weight to concentrate on the center of the tread, leading to rapid wear in the center. Underinflation can result in uneven tire contact with the road, increased wear, higher rolling resistance, and increased fuel consumption. The Changan CS75 has a body size of 4650mm in length, 1850mm in width, and 1715mm in height, with a wheelbase of 2700mm. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension, with a unibody structure.

16

5

Share

What are the differences between Ora Black Cat and White Cat?

Here are the specific differences between Ora Black Cat and White Cat: 1. In terms of range: The Ora White Cat is equipped with a 33 kWh ternary lithium battery pack, offering a range of 351 km. The Ora Black Cat, on the other hand, comes with a 34 kWh ternary lithium battery, providing a range of 360 km. 2. In terms of charging time: The Ora Black Cat's battery can be fast-charged from 30% to 80% in just 0.5 hours. The Ora White Cat's fast charging time is 0.67 hours. 3. In terms of body dimensions: The Ora Black Cat measures 3495/1660/1560 mm in length, width, and height, with a wheelbase of 2475 mm. The Ora White Cat measures 3625/1660/1530 mm in length, width, and height, with a wheelbase of 2490 mm. The Black Cat has an advantage in body height. 4. In terms of comfort features: The Ora Black Cat is equipped with features like front power windows and keyless entry for the driver's seat. The White Cat has more extensive configurations, including anti-pinch windows and auto-hold functions.

11

3

Share

Is it necessary to buy a steering wheel cover?

What is the difference between SL and SN oil grades?

How to Solve the Problem of High Fuel Consumption?

How to solve the problem of only NO exceeding the standard?

Does Changing the Air Filter on a Panamera Require Removing the Bumper?

What is the normal tire pressure for the Changan CS75?

What are the differences between Ora Black Cat and White Cat?

What Are the Consequences of Keeping the Motorcycle Choke Open for a Long Time?

Why Shouldn't Cars Be Submerged in Water?

What transmission does the Bestune T77 use?

What are the penalties for an expired temporary license plate?