···
Log in / Register

Is It Dangerous to Drive on the Highway If You're Not Skilled?

4 Answers
VanNorah
07/29/25 10:24am
Driving on the highway without sufficient skill is dangerous. Below is relevant knowledge about road safety: Factors affecting road safety: Traffic violations such as speeding, drunk driving, fatigued driving, and illegal overtaking account for 87.7% of all traffic accidents and 89.03% of fatal accidents. Precautions for highway driving: Do not speed: Speeding reduces the driver's vision, narrows the field of view, and impairs judgment. In case of danger, the risk approaches extremely quickly, and even with extensive driving experience, it may be difficult to avoid disaster. Additionally, speeding in fog, rain, or snow increases the likelihood of accidents due to slippery roads. Do not stop arbitrarily; maintain a safe following distance.
Was this review help?
3
5
Share
LeJanelle
08/13/25 2:21pm
I've worked in the field of driving instruction for many years, and I must be honest—inexperienced drivers on highways can be very dangerous. Highway speeds typically range between 80 to 120 kilometers per hour, and novices, due to lack of experience, may react slowly or make poor judgments. For example, they might fail to check blind spots when changing lanes or mishandle sudden braking, which can easily lead to rear-end collisions or skidding. I recommend that beginners first accumulate sufficient experience on urban or suburban roads, practicing skills like speed control, maintaining safe following distances (at least a 3-second gap), and observing road conditions before attempting highway driving with an experienced driver. Additionally, checking vehicle conditions such as tires and brake systems before entering the highway is crucial. Driving is a technical skill, and safety should always come first—don’t rush to save time at the risk of danger. Mastering the basics with patience can prevent many troubles.
Was this review help?
19
0
Share
Expand All
MacMaria
10/07/25 4:54am
I've been driving for over a decade. When inexperienced, driving on highways can indeed be perilous—higher speeds make it easier to lose control. I still remember my first time on the highway; my palms were so sweaty from nervousness that I nearly missed the exit. Highways change rapidly with dense traffic, making it hard for beginners to handle sudden situations like abrupt braking from the car ahead or severe weather. A single mistake could lead to disaster. My advice is to first get familiar with your car's performance in open areas, practicing acceleration, braking, and lane-changing techniques. Find an experienced companion to coach you, gradually transitioning to highway driving. Remember, highway driving isn't a race—what matters most is maintaining a calm mindset and focus. In the long run, safe driving habits benefit you for life.
Was this review help?
20
0
Share
Expand All
Silva
11/20/25 6:17am
I just got my driver's license not long ago, and the last time I was on the highway, my legs were shaking with fear. Inexperienced driving is indeed dangerous. At high speeds, the car feels like it's running wild. Novices tend to misjudge distances or be influenced by other vehicles, leading to mistakes such as hesitating when changing lanes or making sudden turns that cause loss of control. It's recommended that beginners spend a few more months driving on regular roads to build confidence and skills. What I've learned is to drive steadily, not to rush, and ensure you're well-rested before hitting the highway. Safety is more important than anything else.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

How to Operate the Gear Shifts on a Volvo S60?

Press the foot brake, then directly shift the gear lever to the P (Park) position. This is the parking gear, which locks the transmission's power output and can also prevent the car from rolling on a slope. With the foot brake pressed, shift to the R (Reverse) gear, then slowly release the foot brake to start reversing. Observe the rearview mirror and the reversing camera, adjust the steering wheel, and do not press the accelerator. Press the brake and shift to the D (Drive) gear. This is the driving gear, where the transmission provides forward power, commonly used for daily driving. The S (Sport) gear is a variant of the D gear, standing for Sport mode. It can be engaged at any time, similar to shifting to other gears. The L (Low) gear is also a variant of the D gear, mainly used for uphill or downhill driving, as well as on snowy, icy, or muddy roads. In low gear, the car outputs stronger torque.
6
3
Share

How to Deal with Water Leaking into the Car Window?

First, remove the accumulated water inside the car. There are several drainage holes at the bottom of the vehicle chassis, which are sealed with rubber plugs. Removing these rubber plugs can help drain the water from the cabin. Use a dry and clean towel to gently wipe off water droplets from the dashboard and seats. If there is significant water accumulation, it is advisable to remove the floor mats to facilitate drying. Turn on the air conditioning and adjust the vehicle's circulation switch to the internal circulation mode, allowing the water vapor inside the cabin to be quickly expelled through the air conditioning system. If the water leakage is due to the window not being properly closed, skip this step. If the window is tightly closed but still leaks, check whether the window rubber seals have aged and replace them if necessary.
8
2
Share

What is the best method for repairing rust on car sheet metal?

If the rust appears on the surface and the area is small, you can use water sandpaper to grind off the rust, then perform touch-up painting, and finally spray a layer of rust-proof paint. If the rust is severe with large areas of paint peeling, it is necessary to completely scrape off the rusted paint, then fill and level with putty. After the putty hardens, proceed with repainting. If the car sheet metal is rusted through, the rusted part should be cut out and re-welded, followed by touch-up painting and spraying. If the damaged area is too large, repair is not recommended; it is better to replace the entire panel.
19
4
Share

What are the solutions for high fuel consumption in the ninth-generation Civic?

Check the tire pressure and wear condition. If the tire pressure is too low, it will increase the friction between the tires and the ground, resulting in greater running resistance and higher fuel consumption. Carbon deposits in the engine ignition system and intake system will cause incomplete combustion and increased fuel consumption. Use the method of intravenous cleaning to remove carbon deposits from various parts. Personal driving habits are closely related to fuel consumption. Pay attention to developing good driving habits, such as avoiding sudden acceleration, frequent starts, and aggressive driving. Follow the manufacturer's requirements for regular vehicle maintenance. Timely replacement of engine oil, three filters, and other wear-prone parts can keep the vehicle in good working condition and reduce fuel consumption.
17
5
Share

What Are the Solutions for a Car Not Starting After Refueling?

Use a multimeter or voltmeter to measure the voltage across the battery terminals and check if it is normal. If the voltage is below the required value, you can start the car by jump-starting. Check if the steering wheel is in a locked state. Generally, by turning the steering wheel forcefully while turning the key, the steering wheel lock can be quickly released. When starting an automatic transmission car, ensure the gear is in P (Park) or N (Neutral). If it is in R (Reverse) or D (Drive), the car will not start, and you must also press the brake pedal. If there is a fault in the high-voltage power supply circuit of the ignition system, it will prevent the spark plugs and ignition coils from functioning. Check if the circuit at this location is unobstructed.
8
0
Share

What is the remote key matching method for Geely King Kong?

Insert the key into the ignition switch, and within 7 seconds, repeatedly switch from OFF to ON three times consecutively. On the third time, leave the key in the ON position. At this point, observe that the anti-theft indicator light (red LED) will flash rapidly for 3 seconds, then pause for 1 second. When the anti-theft indicator light lights up again and then goes off, turn the key from ON→OFF→ON. At this time, the horn will sound once, indicating that the learning mode has been entered. Press any button on the remote control in sequence to learn, with a press time greater than or equal to 2 seconds. The horn will sound once, indicating that the learning is complete.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.