Is ID Card Required for Subject 2 Driving Test?

1 Answers
OAlana
07/30/25 9:31am
Subject 2 test requires the examinee to bring the second-generation resident ID card. Preparation for Subject 2 Driving Test: Before getting into the car for the Subject 2 test, the examinee needs to make some preparations. When approaching the vehicle, the examinee should first observe the test site. After entering the vehicle, quickly adjust the seat to a comfortable driving position, then adjust the rearview mirrors. After completing these adjustments, fasten the seatbelt. Once all preparations are done, fingerprint verification will be conducted before starting the test. Subject 2 Test Content: Drive the car to the stop line position for right reverse parking. Stop when your shoulder aligns with the stop line, then shift to reverse gear to begin parking. When entering the parallel parking test area, use the raised part of the windshield wiper as a reference to keep the car aligned with the road edge. Before entering the curve driving test area, position the car slightly to the left when approaching the curve entrance. Drive through the curve and exit from the other end. Upon entering the right-angle turn area, determine whether it's a right or left turn. Before ascending the slope, maintain a 30 cm distance between the car body and the road edge, and drive straight.
Was this review help?
14
0
Share
More Forum Discussions

How to adjust the height of the Qashqai's low beam?

First, open the car door and enter the driver's cabin. Locate the headlight height control knob in the driver's cabin, where you can see the gear positions for adjusting the headlight height. You will notice the knob is marked with four gear positions: 0, 1, 2, and 3. To set the highest position, rotate the knob to the "0" gear. To lower it by one level, turn the knob to the "1" gear position.
12
1
Share

How to Check the Production Date of the Tayron?

The methods to check the production date of the Tayron are as follows: 1. Below the B-pillar on the passenger side, open the door to see the plate, which only shows the year and month, and includes the vehicle's VIN; 2. The certificate of conformity that comes with the new car, located in the upper right corner of the certificate, where the production date is specified down to the year, month, and day; 3. Inside the engine compartment, there is an aluminum plate with the production date. The Tayron is a car under FAW-Volkswagen. In terms of body dimensions, it comes in three lengths: 4589mm, 4595mm, and 4590mm, with a width of 1860mm, a height of 1660mm, and a wheelbase of 2731mm.
6
5
Share

How many colors does the Lavida have?

The body colors include Elegant White, Graceful Gold, Sharp Silver, Modest Purple, and Mysterious Black, totaling 5 colors. In terms of body dimensions: The Lavida is a compact car. Its body dimensions are 4613mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm and a curb weight of 1210kg. In terms of powertrain configuration: The Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
18
1
Share

How to Use the Odyssey Cruise Control?

CANCEL is used to deactivate cruise control, RES is for resuming cruise, and MAIN turns off cruise control. Before activating cruise control, you should set the cruising speed using the SET button. Press the +/- buttons on the right side of the steering wheel to adjust the cruise control speed - increase with + and decrease with -. The distance adjustment feature automatically detects the distance to the vehicle ahead and will decelerate or brake if the leading vehicle slows down. Compared to the warning system, lane keeping assist adds control over the braking mechanism. When the vehicle deviates from the lane and shows a tendency to cross the line, the brakes will issue a warning.
16
0
Share

What are the functions of the Lavida multi-function steering wheel buttons?

Multi-function steering wheel left side is the cruise control, voice control and phone function buttons. How to cancel cruise control: Press CNL to cancel cruise control, 0/1 to turn off cruise control, then press RES to resume cruise. Set button: The cruise control function does not start immediately after turning on the switch. The SET key is the setting button, press it to adjust the desired speed. (Note: It can only be activated at speeds above 30km/h). Silver buttons: The silver buttons are used to control speed value adjustments, left/right respectively control speed decrease/increase.
19
5
Share

Where is the normal position of the Honda CRV temperature gauge?

The normal position of the Honda CRV temperature gauge is when the needle is in the middle. Below is an introduction to the Honda CRV temperature gauge: Marking meanings: The temperature ranges from C to H, where C represents 60 degrees. Once the needle reaches C, it indicates the temperature has reached 60 degrees; H (red zone) represents 110 degrees. Needle position: It is best for the needle to always stay in the middle position. When the needle enters the red zone, the temperature is too high. Prolonged high temperature can lead to "boiling over," which means the engine coolant boils, potentially causing the radiator to burst and the engine to overheat and sustain damage.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.