···
Log in / Register

Is Broken Glass Covered Under New Car Warranty?

1Answers
VonReagan
07/29/2025, 12:47:48 PM

New car glass breakage is covered under warranty during the warranty period. Warranty provisions: Automotive glass is covered by warranty. For non-human-induced damage during the quality guarantee period, manufacturers should provide free replacement according to the three-guarantee regulations. If the damage is caused by the 4S store rather than a quality issue, it should be resolved through negotiation between the buyer and the 4S store. Warranty explanation: Within 60 days from the date the seller issues the purchase invoice or within 3,000 kilometers of driving mileage, if major components of the engine or transmission have quality problems, consumers can choose to replace the engine or transmission for free. The types and ranges of major components of the engine and transmission are specified by the manufacturer on the three-guarantee certificate.

Was this review help?
120
Share
More Q&A

What is the method for replacing the cabin air filter on the Lynk & Co 01?

The method for replacing the cabin air filter on the Lynk & Co 01 is: 1. Open the glove box and slide down the damper; 2. Press both sides of the glove box to release the clips; 3. Remove the glove box; 4. Locate the cabin air filter inside the glove box and replace it. Taking the 2020 Lynk & Co 01 as an example, it belongs to the compact SUV category with body dimensions of: length 4512mm, width 1857mm, height 1689mm, and a wheelbase of 2734mm, with a curb weight of 1736kg. The 2020 Lynk & Co 01 features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5L turbocharged engine producing a maximum horsepower of 143PS, maximum power of 105kW, and maximum torque of 215Nm, paired with a 7-speed dual-clutch transmission.
105
Share

How to Fix the Airbag Warning Light?

Airbag warning light indicates a potential malfunction in the airbag system. If the airbag warning light comes on while driving, you can continue to drive steadily to the nearest 4S shop or repair shop for inspection. It is normal for the airbag light to illuminate for about 6 seconds and then turn off when the ignition is turned on. Reasons for the airbag warning light to illuminate: 1. Loose or disconnected wiring; 2. False fault, severe battery depletion may cause the airbag to feedback a low voltage signal for a certain airbag, generating a fault code; 3. Water intrusion into the airbag system, leading to unresponsive warning light wiring or circuit short circuit.
101
Share

Does the Airbag Light Affect Driving?

Airbag light illumination does not affect other vehicle functions, so the vehicle can continue to be driven. However, it is not recommended to drive when the airbag light is on, as it may indicate a fault in components such as sensors, processors, electronic control units, the airbag itself, or the airbag module. In such cases, the airbag cannot be triggered and will not provide protection in the event of an accident. Here is more information about the airbag light: 1. If the airbag light continues to flash or stays on for more than 6-8 seconds after the vehicle is started, or if it flashes or stays on while the vehicle is in operation, these conditions indicate a possible fault in the airbag system. 2. The airbag light may also illuminate due to a false fault. If the car battery is low or other electrical equipment in the vehicle is damaged, it could affect the feedback voltage of the airbag safety system, resulting in a fault code. In such cases, clearing the fault code usually resolves the issue.
118
Share

What is the function of engine start-stop technology?

Engine start-stop technology serves the following purposes: 1. It automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts the engine when it's time to move forward again. This is a new technology that can automatically control engine shutdown and ignition, aiming to put the engine into automatic hibernation during brief stops to achieve fuel savings and emission reduction. 2. The automatic start-stop function standardizes driving behavior; it won't activate if the seatbelt isn't fastened. Conversely, if the seatbelt is unfastened after stopping, the engine won't restart even if the brake is released or the accelerator is pressed. 3. The automatic start-stop function prioritizes safety and reliability, with fuel efficiency being a secondary consideration. It only delivers its energy-saving and emission-reducing effects when all conditions meet the minimum standards.
101
Share

What to Do When the Car Shows ABS Malfunction?

Car ABS malfunction reasons and solutions are as follows: 1. ABS system: ABS system plug is loose. Solution: Tighten the plug. 2. Vehicle speed sensor: The half-shaft gear ring of the vehicle speed sensor is dirty, stuck with iron filings or magnetic substances. Solution: Clean the half-shaft gear. 3. Battery voltage is too high or the fuse is blown. Solution: If the battery voltage is too high, repair is needed; if the fuse is blown, replacement is required. 4. Poor electronic control device. Solution: Professional repair at a 4S shop is needed. 5. Poor hydraulic regulation device. Solution: Professional repair at a 4S shop is needed.
120
Share

How to reset the tire pressure warning on the VV7?

vv7 tire pressure warning reset method is as follows: 1. First, switch the dashboard to the settings interface; 2. Find the driving data reset option; 3. Press the OK button to enter the reset; 4. Select the tire pressure option and press the OK button again, waiting for the reset to complete. Below is relevant information about the tire pressure warning system: The Tire Pressure Monitoring System (TPMS), fully known as the Automotive Tire Pressure Monitoring System, is a device designed to effectively prevent tire blowouts by monitoring changes in tire pressure during high-speed driving. Its working principle involves installing highly sensitive sensors on all four tires of the vehicle to monitor tire pressure in real-time and dynamically while the car is in motion. The data is then transmitted via radio signals to a receiver, which displays the pressure values digitally. The system can automatically alert the driver to any tire pressure loss caused by various reasons (such as a nail puncturing the tire), enabling timely detection of issues and effectively preventing accidents.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.