Is an Emission System Malfunction Dangerous?

1 Answers
DelMatthew
07/29/25 1:49pm
An emission system malfunction is indeed dangerous, and here are the potential impacts of such a malfunction: Affects fuel consumption and reduces engine lifespan: It can impact fuel consumption, and over time, poor combustion may lead to excessive carbon buildup. While it doesn't directly cause engine damage in the short term, an emission system malfunction can compromise the safety of the vehicle during operation and shorten the engine's service life. Increased exhaust resistance: During vehicle operation, issues with the fuel supply system, ignition system, or engine overheating can cause the catalytic converter substrate to sinter or flake off, leading to increased exhaust resistance. Environmental pollution: Due to the use of fuel or lubricants, the catalytic converter may become poisoned and lose efficiency. This affects the catalytic conversion process, leading to the formation of sulfur and phosphorus compounds and deposits inside the catalytic converter. Consequently, vehicle performance deteriorates, resulting in reduced power, increased fuel consumption, and worsened emissions.
Was this review help?
6
1
Share
More Forum Discussions

Can Temporary License Plates Still Be Used After Obtaining Metal Plates?

After obtaining metal plates, temporary license plates can no longer be used. Temporary plates are only for temporary use before the metal plates are manufactured, with a validity period of 15 days. Once the metal plates are issued, the temporary plates become invalid and cannot be used. Therefore, to avoid penalties, metal plates should be installed on the vehicle immediately upon receipt. Metal plates refer to vehicle license plates, typically mounted on the front and rear bumpers of the car. For some models, the rear plate may be attached to the trunk. Vehicle license plates are primarily made of metal sheets and serve as the vehicle's unique identifier, akin to an ID card. License plates can be used to look up vehicle registration details and the region of registration. They usually consist of a combination of English letters and numbers, totaling five characters.
5
3
Share

Where is the camshaft sensor located on the Pajero?

The camshaft sensor on the Pajero is located at the front end of the camshaft. The function of the camshaft sensor is to collect the position signal of the valve camshaft and input it into the ECU, allowing the ECU to identify the top dead center of cylinder compression for sequential fuel injection control, ignition timing control, and knock control. Taking the 2020 Mitsubishi Pajero as an example, it belongs to the mid-to-large SUV category, with body dimensions of: length 4900mm, width 1875mm, height 1900mm, and a wheelbase of 2780mm. The 2020 Mitsubishi Pajero features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 3.0L naturally aspirated engine, delivering a maximum horsepower of 174PS, a maximum power of 128kW, and a maximum torque of 255Nm, paired with a 5-speed automatic transmission.
8
5
Share

How to Remove the Headlight on a Mondeo?

The method for removing the headlight on a Mondeo is as follows: 1. Disconnect the headlight's wiring connector; 2. Prepare a hex wrench of the appropriate size and remove the two fixing screws of the headlight; 3. Push the headlight inward, then release the bottom clip position of the headlight assembly; 4. Pull out the rear corner of the headlight to complete the removal. Taking the 2020 Mondeo as an example, it is a mid-size sedan with the following dimensions: length 4873mm, width 1852mm, height 1470mm, wheelbase 2850mm, and a curb weight of 1592kg. The 2020 Mondeo is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 182PS, maximum torque of 243Nm, and maximum power of 134kW, paired with a 6-speed automatic transmission.
5
1
Share

What is the 0-100 km/h acceleration time for the Mistra?

The 0-100 km/h acceleration time for the Mistra is 10.23 seconds. The 0-100 km/h acceleration time refers to the time it takes for a vehicle to accelerate from 0 to 100 kilometers per hour, which is a direct reflection of the car's power. Taking the 2021 Mistra as an example, it is a mid-size sedan with the following dimensions: length 4780mm, width 1815mm, height 1460mm, wheelbase 2770mm, minimum ground clearance 116mm, and curb weight 1357kg. The 2021 Mistra features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 170 PS, maximum torque of 253 Nm, and maximum power of 125 kW, paired with a 7-speed dual-clutch transmission.
14
1
Share

How to Adjust Rightward Pull?

Rightward pull can be adjusted through wheel alignment. During driving, vehicles inevitably experience impacts, which can cause deviations in wheel alignment after the tires are hit. The supporting components of the car chassis may undergo slight deformations due to bumps or vibrations. Wheel alignment is an effective method to address vehicle pulling. Wheel alignment is based on the four-wheel parameters of the vehicle, adjusting them to ensure good driving performance and certain reliability. The installation of the steering wheels, steering knuckles, and front axle in a car has specific relative positions. This installation with specific relative positions is called steering wheel alignment, also known as front wheel alignment. Front wheel alignment includes four aspects: caster angle, kingpin inclination angle, camber angle, and toe-in.
5
3
Share

How Long Does It Take to Fully Charge an Electric Vehicle?

It takes approximately 1 to 1.5 hours to fully charge an electric vehicle. The charging time depends on the type of battery used in the vehicle and its capacity. Generally, fast charging for electric vehicles can charge 50% of the battery in 30 minutes, and a full charge takes 1 to 1.5 hours. Slow charging, on the other hand, requires 6 to 12 hours for a full charge. Electric vehicles, also known as EVs, use electricity as their power source and are driven by electric motors. They are classified as new energy vehicles, including pure electric vehicles, hybrid electric vehicles, and fuel cell electric vehicles, which have a relatively smaller environmental impact compared to traditional vehicles. The core components of an electric vehicle are the drive motor, speed controller, power battery, and onboard charger, collectively referred to as the four major components.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.