Is Adding Repair Fluid to Dry Batteries Actually Useful?

1 Answers
AxelAnn
07/30/25 5:08am
Adding repair fluid to dry batteries is not useful. Reasons why adding repair fluid is ineffective: Since maintenance-free batteries use lead-calcium alloy grids, they produce minimal water decomposition during charging and have low water evaporation rates. Additionally, their sealed casing design releases very little sulfuric acid gas. Compared to traditional batteries, maintenance-free batteries offer advantages such as no need to add any liquid, minimal corrosion on terminal posts and wires, strong resistance to overcharging, high starting current, and long charge retention. Dry Batteries: Dry batteries are actually called "maintenance-free batteries." Maintenance-free batteries feature a fully sealed structure and require no maintenance under normal usage, offering excellent performance characteristics such as high efficiency, long lifespan, no pollution, maintenance-free operation, and safety reliability. Due to their structural advantages, maintenance-free batteries consume very little electrolyte and generally have twice the lifespan of conventional batteries.
Was this review help?
17
2
Share
More Forum Discussions

How to Determine if a Car Compressor is Good or Bad?

To determine if a car compressor is good or bad, follow these steps: 1. Start the engine and maintain the speed between 1250 to 1500 RPM; 2. Connect the manifold pressure gauge to the air conditioning refrigeration system, turn on the AC switch, and set the fan to the maximum position; 3. Touch the compressor's intake and exhaust ports. A good compressor will have a cold intake and a hot exhaust with a significant temperature difference between them. If not, it is likely damaged. The working principle of a car compressor: It draws refrigerant from the low-pressure area, compresses it, and sends it to the high-pressure area for cooling and condensation. The heat is dissipated into the air through the radiator, and the refrigerant changes from a gaseous to a liquid state, increasing its pressure.
9
1
Share

What is the Difference Between Regular Tires and Snow Tires?

The differences between regular tires and snow tires are: 1. Different appearance: Regular tires have symmetrical tread patterns; snow tires have asymmetric directional tread patterns. 2. Different materials: Regular tires are made of natural rubber; snow tires are made of a silica-mixed rubber. The functions of tires are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and early damage to vehicle components; 4. To adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring safety, handling stability, comfort, and energy efficiency.
8
1
Share

What is the tire pressure for the X-Trail?

The tire pressure for the X-Trail is 2.5bar. Hazards of excessive tire pressure: 1. The friction and adhesion of the tires will decrease, affecting braking performance; 2. It can cause steering wheel vibration and deviation, reducing driving comfort; 3. It accelerates the localized wear of the tread pattern in the center of the tire, shortening the tire's lifespan; 4. Increased body vibration can indirectly affect the lifespan of other components. Taking the 2021 X-Trail as an example, it is a compact SUV with the following dimensions: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, minimum ground clearance 208mm, and a body weight of 1489kg.
1
0
Share

What is the method to reset the maintenance light on Chery A5?

Chery A5 maintenance light reset method is: 1. Turn off the ignition switch; 2. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch; 3. After 3 seconds, release the two arrow buttons; 4. The maintenance menu will appear, asking if you want to reset; 5. Press and hold the SET button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch to complete the reset. Taking the 2019 Chery A5 as an example, it is a compact car with body dimensions of: length 4552mm, width 1750mm, height 1483mm, wheelbase 2600mm, minimum ground clearance 147mm, and curb weight 1285kg.
9
2
Share

How to Adjust the Clock on Chery Tiggo 3?

To adjust the clock on the Chery Tiggo 3, follow these steps: 1. Turn off the ignition switch and set the headlight switch to the first position. 2. Press and hold the adjustment button until the hour field flashes, then release it. Adjust the hour by pressing the adjustment lever. 3. After setting the hour, the display will automatically switch to minute adjustment. Adjust the minutes by pressing the adjustment lever. Taking the 2020 Chery Tiggo 3 as an example, it is a compact SUV with the following dimensions: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, minimum ground clearance 190mm, and curb weight 1358kg.
14
3
Share

What is the difference between a car DSP and an amplifier?

The differences between a car DSP and an amplifier are: 1. Connectivity to a computer: A DSP can be connected to a computer for better amplifier management, while an amplifier cannot connect to a computer. 2. Functionality: A DSP can perform active frequency division and delay processing, whereas an amplifier lacks DSP processing capabilities. A DSP is a microprocessor that processes large amounts of information using digital signals. Its working principle involves receiving analog signals, converting them into digital signals (0 or 1), modifying, deleting, or enhancing these signals, and then translating the digital data back into analog data or real-world formats in other system chips. An amplifier, or car audio power amplifier, is responsible for selecting and preprocessing input audio signals, amplifying their power to drive speakers effectively.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.