Is a Stacker Considered Special Equipment?

1 Answers
Nicholas
07/29/25 9:19pm
Stacker is considered special equipment. Introduction to Stackers: A stacker refers to various wheeled handling vehicles used for loading, unloading, stacking, and short-distance transportation of palletized goods. Choosing an Electric Stacker: The load capacity of stackers generally includes 1 ton, 1.5 tons, 2 tons, etc., with the national standard maximum being 2 tons. The important parameters of a stacker are only the motor and the mast. The lifting height is a crucial parameter of a stacker, with the national standard maximum generally being 6.5 meters, the minimum height being 1.6 meters, and the commonly used height in warehouses being 4.5 meters. Additionally, the battery is also an important component of a stacker, typically providing 8-12 hours of working time.
Was this review help?
7
3
Share
More Forum Discussions

What are the passing scores for Subject 2, Subject 3, and Subject 4?

Here is the relevant introduction to the passing scores for Subject 2, Subject 3, and Subject 4: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test. It is a written test conducted on a computer, with a full score of 100. A score of 90 or above (including 90) is considered passing. 2. Subject 2: Field driving skill test. It is conducted in a real vehicle in a designated area, with only pass or fail results. The test includes five mandatory items performed in sequence: reversing into a garage, parallel parking, S-curve driving, right-angle turning, and hill start and stop. The full score is 100, and a score of 80 or above (including 80) is considered passing. 3. Subject 3: Road driving skill test. It is conducted on a real vehicle on a road or simulated field, with a full score of 100. For large buses, a score of 90 or above is required; for large trucks, a score of 80 or above; and for other vehicle types, a score of 70 or above is considered passing. 4. Subject 4: Safety and civilized driving-related knowledge test. It is a written test with a full score of 100, and a score of 90 or above (including 90) is considered passing.
20
3
Share

At what level of wear should the flywheel be replaced?

This still depends on whether the clutch's working condition is normal. If there are no abnormalities, there is no need to replace it separately, and it can continue to be used. Below is relevant information about the automotive flywheel: 1. Definition: A disk-shaped component with a large moment of inertia, functioning like an energy storage device. For a four-stroke engine, power is generated once every four piston strokes, meaning only the power stroke produces work, while the exhaust, intake, and compression strokes consume work. 2. Function: The flywheel has a significant moment of inertia. Since the power strokes of each cylinder are not continuous, the engine speed also varies. When the engine speed increases, the kinetic energy of the flywheel increases, storing energy; when the engine speed decreases, the flywheel's kinetic energy decreases, releasing energy. The flywheel helps reduce speed fluctuations during engine operation.
4
2
Share

Which lane should a car take on a two-lane highway?

Right lane. On highways, if there are no markings indicating specific lanes for small vehicles, cars should drive in the regular travel lane. If there are markings for large and small vehicles, follow the designated lane. The middle lane is the normal driving lane, the left lane is the overtaking lane, and the right lane is the emergency lane. On a two-lane highway in the same direction, the minimum speed for the left lane is 100 km/h. For highways with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, the middle lane is 90 km/h, and the rightmost lane is 60 km/h. Below is relevant information about highway lanes: 1. Highways: The average speed on highways is above 80 km/h, with a maximum speed of 120 km/h, which is 60%–70% higher than on regular roads. Highways must indicate lane speed limits, with a maximum speed not exceeding 120 km/h and a minimum speed not below 60 km/h. 2. Vehicle speed limits: On highways, the maximum speed for small passenger vehicles should not exceed 120 km/h, for other motor vehicles 100 km/h, and for motorcycles 80 km/h.
4
2
Share

What Issues Should Be Noted When Buying a Used Electric Vehicle?

When purchasing a used car, the inspection mainly revolves around the vehicle's condition, such as the power battery, electrical system, and other aspects. When selecting a used new energy vehicle, due to its different structure, it is difficult to check the actual condition of some key parts without professional equipment and personnel. Extended information is as follows: 1. Inspection of the power battery: The core of a new energy vehicle's power is the power battery. The quality of the power battery directly affects the vehicle's range. Additionally, since replacing the power battery is very expensive, it is one of the key points during the inspection. 2. Motor, electronic control, and electrical system: A major cause of spontaneous combustion in new energy vehicles is faults in the electrical and electronic control systems. To avoid purchasing a vehicle with safety hazards, it is best to have a comprehensive inspection by a 4S shop, just like with the power battery. 3. Other inspections: For example, whether the steering wheel pulls to one side, whether there are abnormal noises when driving on bumpy roads, and whether the chassis is loose. Additionally, ensuring the completeness of the vehicle's documents is a routine check to rule out major accidents, repaired vehicles, water-damaged vehicles, and to verify the functionality of various vehicle components.
18
2
Share

Does High-Pressure Water Gun Car Washing Damage the Car?

Yes, it does. High-pressure water gun car washing can damage the car paint. When using a high-pressure water gun, excessive water pressure and improper operation can easily cause sand and stones on the car to scratch the surface, leading to abnormal wear of the paint. If the paint is already slightly damaged, the high-pressure water gun can enlarge the damage or even wash away wax, crystal coatings, or protective films. Here are some precautions for car washing: 1. Pre-washing is crucial: Cars often have a lot of dust and mud. Before washing, it's important to add a pre-wash step, which involves using professional equipment to spray a special pre-wash solution on the car body and waiting for one or two minutes. After soaking, most of the dirt will detach from the paint, making it safer to rinse with the water gun. 2. Follow a proper washing sequence: Start with areas that have less dust and mud, such as the roof, hood, and trunk lid. Cleaning from top to bottom helps prevent scratches, and always scrub in the same direction. 3. Choose the right water temperature: After driving for a while, the car is in a high-temperature state, and using cold water to wash it at this time is not advisable. Even if the car hasn't been driven for long but has been exposed to sunlight for a significant time, washing it immediately with cold water can cause the paint to age due to thermal expansion and contraction.
4
1
Share

Where is the QR code for OnStar Smart Rearview Mirror?

In the OnStar-eLite menu on the central control display, clicking this function will bring up the QR code. The OnStar Smart Rearview Mirror is an automotive rearview mirror with an independent operating system and running space program, capable of achieving rich functionalities through wireless networks. Below is relevant information: 1. OnStar: OnStar is a joint venture established by General Motors, SAIC Group, and Shanghai General Motors. Using the OnStar Smart Rearview Mirror, users can install software, games, navigation, and other third-party service provider programs as needed, and can also achieve wireless network access via WiFi or mobile communication networks. In addition to a variety of personalized services, the OnStar Smart Rearview Mirror can also provide intelligent services such as driving recording, GPS positioning, and reverse camera view simultaneously. 2. Special Features: Different from other brands of smart rearview mirrors, the OnStar rearview mirror comes with automatic sensing anti-glare, facilitating drivers during night driving and enhancing driving safety. Three physical buttons are integrated below the rearview mirror, and any of these buttons can directly connect to OnStar voice service.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.