Is a paint thickness gauge reading of over 1000 microns considered a serious condition?

What is the usage method of a spare tire?

The usage method of a spare tire is as follows: 1. The spare tire should not be used for a long time. Generally, the spare tire of a vehicle does not experience tread wear during long-term driving, so its friction level is definitely different from that of regular tires. Long-term use can easily cause issues such as vehicle deviation and uneven friction with surrounding tires. The color of the spare tire is usually bright to remind the owner not to use it for an extended period. 2. The spare tire should not be used on the front wheels. The spare tire is generally meant to replace the rear wheels. If a front wheel fails, it is best to move a rear wheel to the front and then install the spare tire on the rear wheel. This is because the front wheels bear more weight and friction when encountering obstacles, increasing the risk of a blowout. Using the spare tire on the rear wheel enhances safety. 3. Drive within the speed limit for the spare tire. The spare tire should not be driven faster than 80 km/h or for long distances exceeding 150 km. After replacing a faulty tire with the spare, the regular tire should be replaced as soon as possible. The quality and air pressure of the spare tire differ from regular tires, and driving too fast or for too long poses safety risks. 4. Understand the air pressure and size of the spare tire. Since the spare tire is rarely used, knowledge about it is often limited. This can lead to confusion when a spare tire is needed. Different vehicles have different spare tire specifications. It is important to be familiar with the size, rim, air pressure, and condition of the spare tire beforehand so that you are prepared when needed. 5. Regularly inspect and replace the spare tire. Even if the spare tire has not experienced major issues, it is still exposed to environmental temperatures and other factors during long-term driving, which can cause aging or insufficient air pressure. Regular inspections and timely replacements are necessary. 6. Do not store the spare tire with corrosive items. The spare tire is often kept in the trunk alongside various items and may come into contact with oil or other corrosive liquids. This can accelerate the aging of the tire. When the spare tire is needed, it may not function properly and could even become a new hazard.

10

2

Share

What engine does the Lamborghini Urus use?

Lamborghini Urus uses a 4.0T V8 engine with a maximum output power of 650 horsepower and a maximum torque of 850 Nm. It accelerates from 0 to 100 km/h in 3.6 seconds. The Lamborghini Urus combines the appearance of a supercar with the functionality of an SUV, making it a super SUV. Taking the 2021 Lamborghini Urus as an example, its body dimensions are 5112mm in length, 2016mm in width, and 1638mm in height, with a wheelbase of 3003mm and a fuel tank capacity of 75 liters. In terms of interior, the Lamborghini Urus continues the Lamborghini family characteristics. The entire dashboard adopts a skeleton carbon fiber structure made of ForgedComposite, extending throughout the interior space, with some areas covered by leather-wrapped padding.

10

2

Share

How many cylinders does the Corolla 1.2t engine have?

The Corolla 1.2t engine is a four-cylinder engine produced by Tianjin FAW Toyota Engine Co., Ltd., and is classified as a domestically manufactured engine. The Corolla 1.2t engine model is 9nr-fts, with a maximum power output of 85 kilowatts, a maximum torque of 185 Newton-meters, and a maximum horsepower of 116. For daily maintenance of the Corolla 1.2t engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard being no lower than the requirements specified by the manufacturer. Regularly replace the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount of sludge remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

15

5

Share

How to Adjust the Headlights of the Buick Envision?

The headlight adjustment for the Buick Envision is located on the left front side of the steering wheel, featuring two rollers that can adjust the distance of the high and low beams. It can automatically adjust the height of the lights based on vehicle speed, front and rear load, and hill-climbing angle. Here are some related introductions about the Buick Envision: 1. The new Buick Envision adopts the latest family design language, including a winged front grille, a more three-dimensional rear design, 19-inch new-style wheels, and trapezoidal dual exhaust tailpipes. Additionally, the vehicle comes standard with an aluminum roof rack and adds two new body color options: Meteorite Gray and Mahogany Red. 2. In terms of configuration, the vehicle comes standard with six airbags, LED daytime running lights, LED taillights, keyless entry and one-button start, ANC active noise cancellation technology, engine auto start-stop, EPB electronic parking, TPMS intelligent tire pressure monitoring system, rear parking sensors, a multifunction steering wheel, cruise control, dual-zone independent automatic air conditioning, power-folding and heated exterior mirrors, and a panoramic sunroof. 3. Regarding the powertrain, the 20T model is equipped with a 1.5T engine, delivering a maximum power of 124kW (169PS) and a peak torque of 250N·m. The 28T model features a 2.0T engine with a maximum power of 191kW (260PS) and an increased peak torque of 400N·m. Moreover, the 28T model is paired with a 9-speed Hydra-Matic intelligent transmission across the entire lineup.

5

0

Share

First Maintenance Time for Toyota Corolla?

The Corolla requires a comprehensive free inspection at the 4S dealership after 3 months or 5,000 kilometers of driving, but no parts will be replaced. The first maintenance is scheduled at 6 months or 10,000 kilometers, and the 4S dealership waives the fee for the first maintenance. Subsequent maintenance intervals, as recommended by both the manufacturer and the 4S dealership, should be performed every 10,000 kilometers. Here are the specific details about Corolla maintenance: 1. All Corolla models come with a 3-year or 100,000-kilometer vehicle warranty, a standard that also applies to other FAW Toyota models except for the Crown. 2. The Corolla's maintenance manual differs slightly from those of other common brands. Instead of presenting the maintenance schedule in a table format, it is divided into multiple pages, each detailing the maintenance items at 10,000-kilometer intervals. This approach is more intuitive, allowing owners to clearly see which items should be addressed during each maintenance session. 3. Within 60 days of purchase or within 3,000 kilometers of driving, if major components of the engine or transmission exhibit product quality issues, consumers may be eligible for a free replacement of the engine or transmission, depending on the situation. 4. For the Corolla, the engine oil and oil filter are replaced every 10,000 kilometers. The air cleaner needs to be replaced at 40,000 kilometers, otherwise, it is cleaned. The cabin air filter is replaced every 20,000 kilometers. Other fluids and filters are inspected during maintenance and replaced if necessary, with the brake fluid replaced every 40,000 kilometers.

16

2

Share

What is the problem with fault code C0078?

Fault code C0078 refers to tire diameter. The following is a detailed introduction to fault code C0078: 1. Fault code C0078, applicable to all car manufacturers, means tire diameter (sub-error). Whenever a car fault is eliminated, the fault code needs to be cleared. 2. When clearing the code, it must be done strictly according to the fault code clearing method specified for the specific vehicle model. Be very careful not to simply remove the negative ground cable of the battery to clear the fault code. This operation cannot eliminate the fault, but can only cause potential danger.

9

1

Share

Is a paint thickness gauge reading of over 1000 microns considered a serious condition?

What is the usage method of a spare tire?

What engine does the Lamborghini Urus use?

How many cylinders does the Corolla 1.2t engine have?

How to Adjust the Headlights of the Buick Envision?

First Maintenance Time for Toyota Corolla?

What is the problem with fault code C0078?

What Are the Pros and Cons of Car Waxing?

What are the differences between the BMW 3 Series and the 3 Series GT?

What is the fault when the EPS light is on in the Chana Honor?

How to Use the 4WD System on the Prado 2700?