Is a Fuel Consumption of 9-10L Normal for the Mistra?

1 Answers
DiSimon
07/29/25 7:45pm
A fuel consumption of 9-10L for the Mistra is considered normal. In actual driving conditions, factors such as inadequate driving skills, poor engine condition, and lack of maintenance can lead to increased fuel consumption. The combined fuel consumption of the Mistra is 5.3L/100km. There are currently 5 models of the Mistra available for sale: the DCT-LUX Premium Edition, DCT-TOP Flagship Edition, CVT-GLS Leading Edition, CVT-GLX Elite Edition, and CVT-LUX Premium Edition, all with a combined fuel consumption of 5.3L/100km. The above figures are based on the NEDC combined fuel consumption, which measures the fuel consumption data under the NEDC test cycle. The actual fuel consumption is higher, ranging from 6.0-11.0L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, often due to using unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a high level of carbon deposits in the engine. In such cases, the car should be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor monitors the air-fuel ratio in the engine. If it is damaged, it can cause an imbalance in the air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe emits darker-colored exhaust gases during driving, and the sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they can become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may occur.
Was this review help?
15
0
Share
More Forum Discussions

What causes Jetta to shake at idle but not when accelerating?

Jetta shaking at idle but not when accelerating should be classified as unstable idle speed, usually caused by leaks in the intake pipe and various valves, excessive carbon buildup on valves and intake pipes, malfunctions in sensors and circuits controlling idle speed, or ignition system failures. Below are specific reasons: 1. Unstable idle speed: Unstable idle speed is one of the most common issues in the daily maintenance of electronically controlled engines. Common causes include cracked intake manifolds and poor sealing of the intake manifold. When there is a leak in the air supply system, the engine control unit receives inaccurate intake air signals, leading to misjudgment and resulting in unstable idle speed. 2. Poor combustion: Irregular shaking, mild and not severe, with the most noticeable characteristic being that the shaking frequency increases as the fuel level in the tank decreases. This happens because when the fuel system is dirty, impurities with higher density than fuel settle at the bottom of the tank, making the shaking more pronounced as fuel decreases. The fuel pump draws in these impurities along with the fuel, leading to poor combustion in the combustion chamber, which causes the shaking.
10
4
Share

What are the tips for reverse parking?

Here is a detailed introduction to the techniques for reverse parking: 1. Identify the starting point: Taking right-side reverse parking as an example, the distance between the car at the starting position and the left line should be 1.2-1.8 meters, the steering wheel should be straight, and the car body should be parallel to the left line. When reversing, use the bottom edge of the left rearview mirror as a reference. When the two coincide, turn the steering wheel fully to the right and continue reversing. 2. Control the corner point: Watch the right rearview mirror. When you spot the corner point of the parking space, pay attention to the changing distance between the corner point and the car body. When the distance is less than 30 cm, turn the steering wheel back halfway and continue reversing. Once the car body enters the parking space and is parallel to the parking line, turn the steering wheel back one full turn. If the distance is not less than 30 cm, do not turn the steering wheel back. Keep reversing until the car body is parallel to the parking line, then turn the steering wheel back one and a half turns at once. 3. Align the stopping point: The stopping point is the parking spot after entering the parking space. The reference method is the same as for the starting point. When you see the bottom edge of the left mirror coincide with the shoulder line of the parking space, stop the car.
8
0
Share

How many kilometers should a new car be driven before changing the engine oil?

Here is the relevant introduction about changing engine oil for new car maintenance: 1. Generally speaking, considering the quality of domestic oil, it is more appropriate to change the engine oil at around 8,000 kilometers. 2. Changing the oil at 8,000 kilometers is not suitable for all situations. The replacement time varies depending on the quality of the oil and the road conditions. Full synthetic oil has the longest service life, and it can generally be replaced at around 10,000 kilometers. Semi-synthetic oil can be replaced at 8,000 kilometers. Ordinary mineral oil is recommended to be replaced earlier. 3. If you drive on congested roads for a long time, the working environment of the engine will be harsh, and the cleaning work of the engine oil will also increase. In this case, the oil change cycle may be shortened. When changing the engine oil, remember to replace the oil filter at the same time. A poor-quality oil filter may affect the quality of the engine oil.
10
0
Share

Why does the motorcycle sometimes not respond when starting?

Here are the specific reasons why a motorcycle sometimes does not respond when starting: 1. Clutch switch damage. 2. Insufficient battery power. 3. Spark plug gap too large or excessive carbon buildup. 4. Faulty high-voltage cap connected to the spark plug. 5. Damaged starter fuse. Below is extended information on daily motorcycle maintenance methods: 1. Idle speed control: During the break-in period, keep the motorcycle's idle speed at 100 RPM. 2. Gear-speed matching: Match the motorcycle's gear to the speed. 3. Braking method: When braking is needed due to an obstacle ahead, release the throttle, press the rear brake with your right foot, and gently apply the front brake with your right hand. 4. Spark plug installation method: Hand-tighten the new spark plug until it can't be turned anymore, then use a spark plug socket to tighten it an additional quarter to half turn.
17
2
Share

When is the first session of the Subject 1 driving license test?

The scheduling of the Subject 1 test varies by location, as it is arranged independently by local vehicle management offices. The test is available throughout the day on the scheduled date. The Subject 1 exam covers driving theory fundamentals, road safety laws and regulations, local traffic rules, and related knowledge. Additional information: The total duration of the Subject 1 test is 45 minutes, consisting of 100 questions in the form of true/false and multiple-choice items. A perfect score is 100 points, with a passing mark of 90. The test papers are randomly selected and combined by the computer-based driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations."
6
5
Share

Is the Lynk & Co 03+ Still Worth Buying?

The Lynk & Co 03+ is still worth buying. Here are the relevant details about the Lynk & Co 03+: 1. Exterior Design: The Lynk & Co 03+ primarily features a full-body sporty kit, including optional carbon fiber front lip, front grille, new 19-inch dual-tone multi-spoke alloy wheels, rear diffuser, carbon fiber rear spoiler, and a quad-exit exhaust system. Additionally, through the optimization of aerodynamic components, the Lynk & Co 03+ maintains a nearly unchanged drag coefficient while increasing maximum downforce from 11kg to 40kg at top speed, enhancing handling stability and performance. 2. Interior Design: The cabin of the Lynk & Co 03+ is extensively wrapped in Alcantara material, giving it a premium and sporty appearance. The addition of paddle shifters and integrated sport seats further enhances the performance car ambiance. Moreover, the Lynk & Co 03+ comes equipped with high-end features such as a full LCD instrument panel, large central touchscreen, electronic gear shifter, and electronic parking brake. 3. Features The Lynk & Co 03+ not only incorporates Lynk & Co's benchmark 17 intelligent driving assistance technologies but also introduces a new Track Mode in the driving mode selection. This mode features dynamic tuning to unleash mechanical power, showcasing the charm of sporty driving control.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.