Is a Fuel Consumption of 20 During Traffic Jam Normal?

1 Answers
StAurora
07/30/25 8:51am
Is a Fuel Consumption of 20 During Traffic Jam Normal? A fuel consumption of 20 during a traffic jam is normal. Here are some driving tips for traffic jams: 1. Maintain an appropriate following distance: It's crucial for drivers to choose the right following distance. Adjust the distance based on the traffic conditions to prevent others from cutting in and avoid collisions when overtaking. 2. Avoid aggressive starts: In heavy traffic, it's best not to accelerate too aggressively. Sudden braking due to unexpected situations ahead can catch you off guard. Maintain a steady start, keep a safe distance from the vehicle in front, and avoid rushing to prevent accidents. After the car in front starts moving, wait until there's a full car length distance before starting to follow.
Was this review help?
3
2
Share
More Forum Discussions

What type of gasoline should be used for the BMW X5?

It is recommended to use 98-octane gasoline for the BMW X5, as it ensures better engine performance, reduces carbon deposits from combustion, and can extend the engine's lifespan. Below are some details about the BMW X5: 1. The BMW X5 is the brand's first four-wheel-drive SUV model, launched in the United States at the end of 1999. It has a wheelbase of 2933mm, a weight of 2200 kg, a top speed of 250 km/h, and features front-engine, four-wheel-drive with a displacement of 2.9L. 2. The BMW X5's greatest advantage is its exterior design, which continues the family characteristics of BMW SUVs, showcasing BMW's design elements throughout, with outstanding features like the panoramic sunroof and angel-eye headlights.
7
3
Share

What to Do When the Tire Pressure Warning Light Comes On?

Tire Pressure Warning Light comes on for the following reasons and solutions: 1. Punctured tire: If the tire is punctured and air leaks slowly, drive at low speed to the nearest repair shop for treatment. Do not pull out the nail immediately, as it may cause more severe air leakage, making the car unable to continue driving. 2. Long-distance driving: Prolonged driving increases tire temperature, leading to higher tire pressure and triggering the warning light. In this case, you can stop and wait for the tire temperature to cool down naturally before continuing, or switch to a spare tire. 3. Lack of tire pressure maintenance: If the issue is due to prolonged lack of tire pressure, use an onboard air pump to inflate the tire to the normal range for regular driving.
12
3
Share

How to Open the Trunk of a Kia K2?

The methods to open the trunk of a Kia K2 are: 1. There is a trunk switch on the remote key, and there is a trunk lock button above the license plate light at the rear of the car. Press it to open the trunk; 2. There is also a trunk switch inside the cabin, pull it to open the trunk. Below is an introduction to the Kia K2: 1. The exterior design of the Kia K2 is stylish and dynamic, jokingly referred to by netizens as 'inheriting the tiger-stripe front face of the Sportage and K5, very dazzling and impactful.' The unique design of the wheels attracts the attention of many consumers. 2. In terms of interior, the Kia K2 offers two options: 'black + beige' and pure black. The interior craftsmanship of the K2 is exquisite, with uniform seams and no burrs. The dashboard, air vents, and interior panels are all wrapped in fine-textured leather, giving a very premium feel. 3. In terms of power, the K2 is equipped with 1.4L and 1.6L engines, with the 1.6L possibly using the same engine as the Forte, with a maximum power of 90.4kw/6300rpm and a maximum torque increased to 155N·m/4200rpm; while the 1.4L engine model uses G4FA, with a maximum power of 78.7kw/6300rpm and a maximum torque increased to 135N·m/5000rpm. Both new engines are equipped with CVVT variable valve timing technology and are made of all-aluminum engine material.
8
4
Share

What Causes Difficult Gear Shifting on Motorcycles?

Difficult gear shifting on motorcycles can be attributed to the following reasons: 1. Clutch: The clutch transmits and cuts off the power from the engine to the transmission, acting as a buffer in the power transfer process. A properly functioning clutch ensures smooth gear shifting. If the clutch does not disengage completely, it can lead to difficulty in shifting gears. 2. Transmission: The transmission consists of components such as the shift drum, shift forks, main and countershafts, transmission gears, star-shaped gear (five-point gear), and shift shaft. Wear and tear on any of these components can cause gear shifting issues. Note: If the issue is not related to the clutch, inspect the star-shaped gear (five-point gear) and shift shaft. These two components are more prone to failure in actual maintenance scenarios. If these components are functioning properly, the transmission may need to be disassembled for further inspection.
15
2
Share

How to Replace the Water Pump on a New Passat?

Volkswagen Passat water pump replacement steps are as follows: 1. Clean the pump shaft, and if necessary, lightly sand it with sandpaper. Wipe the pump shaft and static ring groove clean with a clean cloth, ensuring there are no debris or small particles; 2. Apply lubricant to the motor shaft and static ring groove. Wipe the new mechanical seal static ring clean with a clean cotton cloth, apply lubricant to the outer ring and end face of the static ring, then embed the static ring into the groove with the end face facing outward, ensuring it is level; 3. Wipe the dynamic ring clean, apply lubricant to the inner ring and end face, then gently rotate the dynamic ring with the end face facing inward until it closely adheres to the static ring end face, and compress the dynamic ring spring; 4. Slide the impeller onto the pump shaft, place a small wooden block on the impeller, gently tap with a hammer to install the impeller in place, and tighten the impeller fixing screw; 5. Insert the motor and impeller into the pump body, being careful not to damage the O-ring on the outer ring of the end cover. Adjust the impeller position, rotate the impeller to prevent jamming at the mouth ring, evenly tighten the end cover screws, check for any impeller jamming, and make necessary adjustments.
11
3
Share

How to Replace the Key Battery for a Haima?

Haima replacement key battery steps are as follows: 1. Open the folding key and forcefully separate the upper and lower parts of the remote. 2. Disassemble the lower part's upper and lower covers, remove the circuit board, and take out the old battery. 3. Insert the prepared new battery into the circuit board with the positive pole facing downward, place it into the lower part of the shell, and snap the upper and lower parts of the remote back together. Below is some information about remote keys: 1. A car remote key utilizes the wireless remote control function of the central locking system, allowing doors to be unlocked and locked from a distance without inserting the key into the lock. 2. Based on their usage methods, they can be divided into three categories: active working mode, passive working mode, and coil induction mode.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.