···
Log in / Register

Is 1498ml with a T?

4 Answers
Jim
09/07/25 3:46am
An engine displacement of 1498ml refers to an engine displacement of 1.498L. It does not have a T. Below are specific details about engine displacement: 1. Overview: Displacement (Swept-volume) is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or expelled per stroke or cycle. Generally, a larger displacement means the engine releases more energy per unit time (converting chemical energy from fuel into mechanical energy), resulting in better "power performance." This can be compared to a teenager versus a healthy adult—the adult is naturally more efficient at physical labor. Therefore, off-road vehicles and sports cars typically have relatively larger displacements. 2. Displacement Identification: Most domestically produced cars have a model number on the rear, consisting of pinyin letters and Arabic numerals. This includes three parts: The first part consists of 2 or 3 pinyin letters, representing the manufacturer's code. Following the pinyin letters are usually 4 Arabic numerals, with the middle two digits indicating the engine displacement of the model. For example, "08" means an engine displacement of 0.8 liters, "20" means 2.0 liters, and "16" means 1.6 liters. After the displacement digits, there is an additional digit representing the manufacturer's self-defined product sequence number.
Was this review help?
19
4
Share
VanJayden
09/19/25 3:13am
I've seen many 1.5L displacement cars online, and 1498ml basically means 1.5L. The 'T' stands for turbocharging, and now many 1.5L cars have turbocharged versions, like some models of the Honda CR-V or Toyota Corolla, aiming for both fuel efficiency and strong power. I've driven a friend's turbocharged 1.5T car, and the acceleration push is noticeable when stepping on the gas, while naturally aspirated engines are smoother but less powerful. If you're unsure, checking the manufacturer's website or maintenance manual is the easiest way—no need to guess. Turbocharged engines perform exceptionally well on highways and save some fuel in city driving, but long-term use requires attention to cooling system maintenance to prevent overheating. Actually, small-displacement turbocharged engines are a major trend, especially with stricter environmental regulations.
Was this review help?
7
5
Share
Expand All
EllieFitz
11/02/25 3:34am
When I first changed cars, I researched and found that 1498ml equals a 1.5L displacement, and the 'T' stands for turbocharging. Nowadays, many new cars come with a turbo. My old car was a naturally aspirated 1.5L, which was sluggish at acceleration, but after switching to a turbocharged model, the acceleration became much quicker, making highway overtaking a breeze. However, not all 1.5L engines come with a turbo—it depends on the specific model. I recommend checking with local repair shops or reading online reviews—for example, some economy models like the Volkswagen Bora offer turbo options, while non-turbo versions might be cheaper but less powerful. The advantage of turbocharging is reduced fuel consumption with ample power, though the engine can be a bit louder during cold starts in winter. I've been quite satisfied with mine over time. If your car has a turbo, regular oil changes are crucial to prevent carbon buildup.
Was this review help?
15
3
Share
Expand All
RhettFitz
11/02/25 3:36am
1498ml typically refers to a 1.5-liter engine displacement, and the 'T' stands for turbocharging technology. Turbocharging is a common design, especially for small-displacement vehicles, where exhaust gases drive a turbine to increase air intake, allowing a 1.5L engine to deliver performance comparable to larger displacements. Automakers often promote turbocharged versions to meet fuel efficiency and emission standards, such as the Ford Focus or Hyundai Elantra offering 1.5T models. In contrast, naturally aspirated 1.5L engines are simpler and cheaper but deliver less power. Whether to choose a turbocharged version depends on usage—I've driven turbocharged cars and found them particularly powerful on long trips, though maintenance is slightly more expensive and requires regular inspection of the intake system. Most modern vehicles allow you to check the owner's manual or the engine bay label to confirm if they have a turbocharger.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What does it mean when a car displays a faucet symbol?

When a car displays a faucet symbol, it refers to the engine status indicator light. This warning light indicates the operating condition of the vehicle's engine. During vehicle startup when the system performs self-check, this light will illuminate briefly and then turn off automatically. If the light remains illuminated, it signifies potential issues such as poor engine combustion condition, engine knocking, inferior fuel quality, or internal cylinder contamination. The engine malfunction light is controlled by the engine control unit (ECU), which essentially monitors all electronic components of the engine. Therefore, any malfunction will be displayed through this warning light. There are numerous reasons for engine warning light illumination, including but not limited to: mass airflow sensor failure, ignition coil malfunction, thermostat issues, catalytic converter problems, oxygen sensor defects, or excessive carbon buildup in the electronic throttle body.
7
4
Share

Does a Brand New Car Have Formaldehyde?

Just purchased new cars contain formaldehyde. Here is more relevant information: 1. Methods to remove formaldehyde from new cars: (1) Place adsorbent charcoal or Yeguangni materials inside the car. Charcoal not only absorbs impurities in the air but also improves air quality. Yeguangni, which is more effective, can be placed directly in the corners of the car. This method is more effective than traditional air fresheners. (2) Use fruit peels such as pomelo or orange to eliminate odors. 2. Formaldehyde removal methods: Formaldehyde removal methods refer to a series of measures including green plant adsorption, air purification, photo-oxidation, and physical ventilation. These methods decompose formaldehyde pollutants into carbon dioxide and water at room temperature and release them into the air in molecular form.
16
2
Share

What is the width of a highway lane?

On highways, the standard width for a single lane is generally 3.75 meters, with an emergency stopping lane width of 3.5 meters. The relevant regulations for lane width and toll booth width are as follows: Regulations on lane width: According to the 'Highway Engineering Technical Standards', the lane width for highways with a design speed of 120km/h is 3.75m, and the emergency stopping lane width is 3.5m. Currently, the maximum design speed for highways in China does not exceed 120km/h, so the above standards are generally adopted. Toll booth lane width: Each lane at a highway toll booth is 2.5 meters wide, with an additional width of over 3.5 meters set up when necessary. However, regardless of the highway's width, drivers must drive in the corresponding positions. Only by adhering to laws and regulations can drivers effectively prevent traffic accidents on highways.
10
0
Share

What car has a logo similar to Bentley's?

Similar to Bentley's logo is the Riich G5. Below is a relevant introduction to the Riich G5: Power: The 2.0DVVT engine utilizes the currently most popular dual continuous variable valve timing technology, featuring an inline 4-cylinder 16-valve double overhead camshaft structure and combustion rate control technology. It delivers a maximum power of 102/5750 kW/rpm and a peak torque of 182/4300 N·m/rpm. Interior: The overall interior style resembles that of the Chery A3's new interior version. The air vents on the center console have been moved from below the original DVD display to both sides, while the screen size has been enlarged. Below that is the air conditioning control area, and at the very bottom is a flip-out hidden ashtray. The arrangement of the entire functional area is identical to the currently sold version of the Riich G5.
14
5
Share

What is the disassembly tutorial for the new Sagitar ashtray?

New Sagitar ashtray disassembly tutorial: The ashtray of the Sagitar is fixed with clips. These clips are located on both sides of the ashtray. Press the clips on both sides simultaneously with both hands to remove the ashtray. The car ashtray is a versatile tool placed in the car. When smoking in the car, it can hold cigarette ash and has a hole to automatically extinguish cigarette butts, as well as a place to hold unfinished cigarettes. The new Sagitar is a car launched by FAW-Volkswagen, with a body length, width, and height of 4644mm, 1778mm, and 1482mm respectively, and a wheelbase of 2651mm. The car has four engine configurations: a 1.6L naturally aspirated engine, a 1.4TSI turbocharged engine, a 1.8TSI turbocharged engine, and a 2.0TSI turbocharged engine.
10
4
Share

Where is the Car Glove Box Located?

Car glove box is located in front of the passenger seat. The glove box consists of a glove box light, door hinge, door lock mechanism, and damper. The function of the glove box light is to provide illumination; when the owner opens the glove box, the light will illuminate the interior of the storage compartment. The glove box door lock comes in two forms: one is the hook type, and the other is the pin type. The hook type achieves locking by hooking the lock with a hook; the pin type refers to the arrangement of a retractable pin on the glove box door, which can extend left and right, and the box body is equipped with pin holes for the pin to move in and out, thereby achieving the functions of locking and opening. The movement state of the glove box when opening is relatively smooth, which is due to the role of the damper in the glove box. The damper mainly provides a certain buffering effect for the opening of the glove box, reducing impact and noise when the glove box is opened.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.