In which year were China IV vehicles produced?

1 Answers
Desiree
07/24/25 4:50pm
China IV vehicles were produced after 2011, and there are also vehicles produced in 2010 or earlier. The implementation time of the China IV standard varied across different regions, with some areas adopting it earlier than others. In regions where the standard was implemented earlier, China IV-compliant vehicles were produced sooner. It wasn't until July 1, 2011, that the China IV standard was fully implemented nationwide. More information about the China IV emission standard is as follows: 1. The China IV emission standard is the fourth stage of national standards for motor vehicle pollutant emissions. Compared to China III, the China IV standard requires light-duty vehicles to reduce single-vehicle pollutant emissions by approximately 50%, heavy-duty vehicles to reduce single-vehicle emissions by about 30%, and particulate matter emissions to be reduced by over 80%. 2. Different countries and regions adopt different emission standards based on their actual conditions. However, there are mainly three test cycles for passenger vehicle emissions: the EU's NEDC cycle, the US's FTP75 cycle, and Japan's JC08 cycle.
Was this review help?
5
4
Share
More Forum Discussions

How to Turn On and Off the Rear Wiper?

The method to operate the wiper switch is as follows: To activate the automatic wiper, push the right-hand stalk forward once, which will position it at the automatic wiper setting. The car will then display a message indicating 'Automatic wiper is on.' To turn off the automatic wiper, pull the wiper stalk backward and then return it to its original position. Below is some relevant information about wipers: 1. Activation Position: The switch for most wipers is located on the right-hand stalk of the steering wheel, known as the stalk-type wiper. However, a few vehicles have this switch on the left-hand stalk. 2. Usage Method: Pulling the wiper control stalk toward the driver will activate the windshield washer. If you frequently use the wipers, it is important to check the windshield washer fluid level. If the fluid level is too low, it should be replenished promptly to prevent the wipers from operating dry.
20
3
Share

What is the maximum speed of the JMC Transit diesel vehicle?

JMC Transit diesel vehicle has a maximum speed of 125 km/h. Relevant details are as follows: 1. Km/h: If maintaining a constant speed of 120 km/h, the vehicle will cover 120 kilometers in one hour. Generally, when referring to speed in km/h, it indicates the distance traveled per hour. For example, 60 km/h means traveling at a speed of 60 kilometers per hour, covering a distance of 60 kilometers in one hour. 2. Speed: Scientifically, speed is used to represent how fast an object moves. Numerically, speed equals the distance traveled per unit of time. The formula for calculating speed: V=S/t. The units of speed are m/s and km/h.
15
3
Share

Will Changing Lanes Over Solid Line Before Red Light Be Captured?

Changing lanes over a solid line before a red light is not allowed, and intersections with traffic lights are generally equipped with electronic surveillance cameras that automatically capture such violations. Below are the relevant situations where crossing the solid line before a traffic light may not be penalized: 1. Avoiding emergencies: On a straight-only lane, if the vehicle in front cannot move due to a malfunction, you may cross the solid line to bypass it to avoid obstructing traffic. However, after bypassing, you must continue driving in the direction indicated by the lane you entered; otherwise, you may be recorded for not driving in the designated lane. 2. Traffic police on-site command: Follow the instructions of traffic police present at the scene, prioritizing their directions. 3. Yielding to emergency vehicles: If emergency vehicles such as fire trucks or ambulances are approaching while performing urgent tasks, you must yield by moving to the sides. Failure to yield may result in penalties.
3
2
Share

Where is the spare tire of the imported Toyota Sienna located?

The spare tire of the Toyota Sienna is located underneath the vehicle. Precautions for using the spare tire are as follows: 1. Regularly inspect the spare tire: Few car owners check the spare tire during routine maintenance or before long trips, and some unprofessional repair shops often overlook this. Spare tire inspection mainly involves checking tire pressure, wear, and cracks. The tire should be replaced as soon as possible once the tread wears down to the wear indicator line. If there are fine cracks on the tire sidewall, it should not be used for long-distance or high-speed driving, as the sidewall is relatively thin and prone to blowouts at high speeds. 2. Avoid storing oil products with the spare tire: The main component of tires is rubber, which is most vulnerable to erosion by various oil products. Car owners often store lubricants and other oil products in the trunk. If these oils come into contact with the tire, they can cause swelling and corrosion, significantly reducing the tire's lifespan. If the tire gets stained with oil, it should be promptly cleaned with a neutral detergent.
12
5
Share

What is the actual fuel tank capacity of the Classic Sylphy in liters?

The official parameter configuration table of the Classic Sylphy indicates a fuel tank capacity of 50 liters. Fuel tank capacity refers to the size of the fuel tank, measuring a vehicle's ability to carry fuel. The fuel tank capacity determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther the car can travel. Related details are as follows: 1. Fuel consumption: The size of the fuel tank is directly related to the vehicle's fuel consumption. Generally, a full tank of fuel can support a driving distance of over 500 kilometers. For example, a car with a fuel consumption of 10 liters per 100 kilometers typically has a fuel tank capacity of around 60 liters. Different car models have varying fuel tank capacities, and even similar models from different brands may have different fuel tank capacities since there is no national standard. However, most car manufacturers follow a general rule: a full tank of fuel should support a driving distance of approximately 600 kilometers, not less than 500 kilometers. 2. Actual capacity: The actual fuel tank capacity is greater than the nominal capacity. According to fuel safety regulations, the national standard stipulates that the nominal capacity of a car's fuel tank is 95% of the rated capacity. Therefore, when filling up, the actual fuel quantity can exceed the nominal capacity by up to 10%.
5
2
Share

How to Open the Car Door from the Back Seat?

Ask the driver to help observe the rear traffic situation from the left rearview mirror to confirm safety. Below is relevant information about opening car doors: 1. Two-stage door opening method: The driver or passenger, after ensuring the surrounding area is safe, first opens the door slightly to create a small gap, then turns their head to check the rear situation. If confirmed safe, they can then fully push the door open to exit. 2. Dutch Reach method: Use the hand farthest from the door to open it. This naturally turns the upper body, head, and shoulders outward, making it easier to see the parking situation, effectively preventing 'dooring' accidents.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.