In which country is the Geely Emgrand car produced?

2 Answers
McJade
07/24/25 2:26pm
Geely Emgrand cars are produced in China. More information about the Geely Emgrand is as follows: 1. Geely Emgrand (referred to as Emgrand) is a sub-brand under the parent brand of Geely. 2. Emgrand's brand proposition is "Excellence, Stability, and Prestige," representing Geely Automobile's development direction in safety, energy efficiency, and environmental protection. 3. The new Geely Emgrand is equipped with a 1.3T GeTec DVVT turbocharged engine. It has a maximum power of 98kw, with turbo intervention at 1800 rpm and peak torque output of 185NM at 2000 rpm. The power per liter and torque per liter are higher than those of the same class 1.5T engine, and its power performance is close to that of a 2.0-liter naturally aspirated engine.
Was this review help?
8
2
Share
LeCali
08/11/25 8:13am
Speaking of the Geely Emgrand, as a long-time car enthusiast who follows the automotive industry closely, I've seen many models over the years. This car is definitely Chinese—Geely is a very well-known domestic car brand in China, and the Emgrand series is quite popular in their product lineup. I remember it was independently developed by Geely and is produced in their factory in Zhejiang. The quality has improved significantly in recent years. It's affordably priced, suitable for average families, and sells quite well domestically. The Chinese automotive industry has developed rapidly, and independent brands like Geely can now compete with foreign brands in terms of quality. Friends of mine who have driven the Emgrand say it handles well and maintenance isn't expensive, but when buying a new car, it's important to choose the right trim level to avoid minor issues. Overall, the Chinese-made Emgrand offers good value for money, but proper maintenance is still essential for smooth driving.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Why doesn't the dash cam turn off after the car is turned off?

The reason why the dash cam doesn't turn off immediately after the car is turned off: Because the dash cam itself has a built-in battery to prevent unexpected power failure which may cause the last video segment not to be saved, so the dash cam will wait for a while before shutting down after the vehicle is turned off. The following are the functions of a dash cam: 1. Evidence: After installing a dash cam, it can record the entire driving process including video images and sound, which can provide evidence for traffic accidents. 2. Surveillance: It can also be used as a parking monitor. The video footage from the dash cam cannot be edited; if it is edited, it will not be helpful in case of an accident. It also helps prevent unavoidable fraudulent claims that are common in today's society.
2
0
Share

What Are the Reasons Why the Other Party Can't Hear You When Making Calls via Car Bluetooth?

The reasons why the other party can't hear you when making calls via car Bluetooth are: the call volume on the phone or the volume of the car navigation system is not turned on, or the car Bluetooth is not paired and connected with the phone. If the call volume on the phone is not turned on, the solution is to try dialing a phone number. During the dialing or call state, press the volume up button on the side of the phone to increase the sound. If the volume of the car navigation system is not turned on, simply turn it on. The solution for car Bluetooth not being paired and connected with the phone is to first establish a pairing relationship between the phone and the car Bluetooth device. Turn on the Bluetooth function on both the phone and the car Bluetooth device, and set the phone Bluetooth to "Visible to All" in the settings. Then, search for Bluetooth devices on the phone, select the car Bluetooth device once found, and pair it using the password: 0000. Once the pairing is complete, the connection will be successful. After the car Bluetooth and phone Bluetooth are successfully paired and connected, you can make and receive calls; playing music on the phone can be enjoyed through the car Bluetooth device. Bluetooth hands-free is also known as car Bluetooth or car hands-free. The Bluetooth technology in car Bluetooth systems has the same transmission system. The main function is to connect with the phone via Bluetooth for hands-free calls during normal driving, achieving hands-free operation and reducing the risk of traffic accidents. It automatically identifies mobile phones without the need for cables or phone holders to connect with the phone; the owner can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can conduct calls through the car's audio system.
17
1
Share

What does it mean when the lower edge of the rearview mirror is parallel to the yellow line during reverse parking?

When the lower edge of the rearview mirror is parallel to the yellow line during reverse parking, it means that you should focus on the side of the car body closest to the boundary line. The side of the car body farther from the boundary line will appear parallel to the yellow line when viewed in the rearview mirror. Below are some precautions for reverse parking: 1. Reverse from the left side: Whenever possible, choose to reverse from the left side, as it is easier for the driver to observe. During the reversing process, first look behind, then pay attention to both side rearview mirrors. 2. Observe the rear situation: Before reversing, check the situation behind the car, estimate the reversing route, and determine whether the front of the car will hit any obstacles during reversing. Especially when the steering wheel is turned significantly, the turning radius of the car's steering wheels is larger than that of the rear wheels, and the front of the car will swing outward more during reversing. Be sure to avoid scraping or hitting the front of the car.
5
3
Share

Where is the coolant location in the Magotan?

The coolant in the Magotan is located in a small pink liquid reservoir on the left side of the engine compartment. The filling position is in the middle of the reservoir, marked by two horizontal lines. If the fluid level is below the "MIN" mark, coolant should be added immediately. Coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipes, with a special focus on the five-way hose. The five-way hose gets its name from having five connection interfaces to various parts. The coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there are any signs of coolant leakage in this section, replace the hose or re-secure the interface as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue filling the reservoir with water so that it continuously flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will have a faint pink tint. Continue adding clean water until clear water flows out. Note: Remember to disconnect the heater hose to drain all water from the heater core. Approximately one hour after draining, add the new coolant through the radiator hose, which allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Top up the coolant to the "MAX" mark on the reservoir.
13
3
Share

What causes the hissing sound at idle?

The reasons for a hissing sound at idle are as follows: 1. Poor spark plug performance; 2. Vacuum hose leakage; 3. High-voltage wire leakage; 4. PCV valve blockage; 5. Throttle position sensor malfunction; 6. Idle stepper motor failure; 7. Idle control valve malfunction; 8. Abnormal throttle opening; 9. Intake system leakage. The causes of valve leakage include: 1. Wear: The working surfaces of the valve and valve seat wear or corrode, forming spots or depressions with carbon buildup. 2. Poor sealing: Excessive clearance between the valve stem and valve guide causes the valve stem to wobble, preventing proper sealing, or the valve stem bends and deforms, tilting the valve head and resulting in leakage.
14
0
Share

How to Deal with Mice in the Car?

There are several methods to handle mice in the car: 1. Inspect the car interior for any damage, and check if the wiring and pipes in the engine area have been compromised. 2. Take the car to a car wash for a thorough cleaning. 3. If any damage is found, promptly visit a repair shop for maintenance or replacement to avoid unnecessary trouble. Here are several ways to prevent mice in the car: 1. Park the car as far away as possible from areas where mice are active, such as garbage dumps, ditches, or grassy areas. 2. Regularly inspect and clean the car to check for signs of mouse activity and ensure the car remains clean. 3. Examine the integrity of the car's air conditioning and ventilation areas, as mice often enter through these parts. 4. Avoid leaving food residues in the car, frequently open windows for ventilation, and ensure doors and windows are closed when leaving the car. 5. Install an electronic rodent repellent in the car to use ultrasonic waves emitted by the device to deter mice.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.