How to Use the Wipers on a Mercedes-Benz?

[LaCaleb]

To use the wipers on a Mercedes-Benz, press the button on the top of the control lever to activate them. Taking the Mercedes-Benz A180L as an example, it is a compact 4-door, 5-seat sedan with body dimensions of 4622mm in length, 1796mm in width, and 1454mm in height, and a wheelbase of 2789mm. The Mercedes-Benz A180L is equipped with a 1.3T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 100 kW and a maximum torque of 200 Nm. It features front-wheel drive, with a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear.

[KylieLee]

I've driven Mercedes for many years, and the wiper operation is actually quite intuitive. There's a control stalk on the right side of the steering wheel. A gentle downward flick activates a single wipe, pressing it down one notch sets it to intermittent mode, further down is low-speed continuous wiping, and the bottom position is high-speed wiping. For automatic wipers, just rotate the side knob on the stalk to the AUTO position - the rain sensor will automatically adjust speed based on rainfall intensity. The windshield washer is also operated from this stalk; pulling it toward you sprays fluid while activating the wipers. Remember to regularly check the wiper rubber blades - replace them immediately if they streak or make unusual noises, as driving with worn wipers in rain can be dangerous.

[MacRosalie]

The Mercedes wiper operation is controlled by the lever on the right side of the steering wheel. It is basically divided into four gears: pushing up is a single wipe, the top position is the off position; the first gear down is the intermittent gear, which can also adjust the wiping frequency through the knob on the lever; the second gear down is low-speed continuous wiping; the third gear is high-speed continuous wiping. To activate the automatic wiper, first turn the knob at the bottom of the lever to the AUTO position. Spraying the windshield washer fluid is simple, just pull the lever toward the driver. In addition, the rear window wiper is usually controlled separately at the top of the lever. Note that in winter, use antifreeze windshield washer fluid to avoid freezing and damaging the system.

[MadelineDella]

Using Mercedes-Benz's wipers is quite simple. The control stalk on the right side of the steering wheel manages all functions: a light push down activates a single wipe, while pressing it further down engages intermittent wiping, low-speed continuous wiping, and high-speed wiping respectively. If the vehicle is equipped with automatic wipers, first adjust the button on the side of the stalk to AUTO, and the rain sensor will start working. The washer function is activated by pulling the stalk towards yourself. A friendly reminder: it's best to replace the wiper blades once a year, as ineffective wiping can pose safety risks, especially during heavy rain when it may affect visibility and distance judgment.

[OKayden]

The wiper controls of Mercedes-Benz are concentrated on the right-hand stalk of the steering wheel. A single wipe is activated by a light upward push; three downward fixed positions correspond to different wiping frequencies. Locate the knob on the side of the stalk labeled AUTO, turn it to activate the automatic wipers—the heavier the rain, the faster they wipe. To clean the windshield, pull the stalk toward yourself to spray washer fluid. Wiper maintenance is crucial; I inspect the rubber blades every three months and replace them immediately if cracks are found. Also, remember to refill the washer fluid regularly to prevent clogging of the spray nozzles.

[LolaLee]

Operating the Mercedes wiper mainly relies on the multifunction lever on the right side of the steering wheel. Specific operations: Pressing down lightly to the first position activates intermittent mode, where you can rotate the small knob on the lever head to adjust the wiping interval; pressing down further engages low-speed continuous wiping; and the final position is high-speed wiping. To enable automatic wipers, first turn the side knob on the lever to the AUTO position. When cleaning the windshield, pull the lever firmly toward yourself, and the spray nozzles and wipers will work simultaneously. Before the rainy season arrives, it's best to check the condition of the rubber blades, as worn-out wipers can leave water streaks on the glass, affecting nighttime driving safety.