How to Use the Wiper on Geely Emgrand?

What is the relationship between Haima and Mazda?

Haima Automobile was formerly known as Hainan Mazda and was also a joint venture of Mazda, abbreviated as "Haima". Here is some relevant information about Haima Automobile: 1. The logo of Haima Automobile: The logo features an abstract falcon shape embedded in a circle symbolizing the sun, representing "the rising sun and the soaring roc," which embodies Haima Automobile's corporate image of striving for excellence and aspiring to soar. 2. Product system: From the launch of its first HX6380 hatchback in 1991 to the "Family II" in 2006, Haima Automobile introduced 17 series and 30 models within 15 years. 3. Family: The Family model was originally based on Mazda's FAMILIA in Japan, and it was produced almost simultaneously with Mazda Japan. As a popular family sedan among consumers, the Family achieved remarkable sales performance in the past few years. The launch of the new Family model further caters to personalized and youthful consumer demands.

7

3

Share

How to Turn on the Air Conditioning Cooling in the Car?

In summer, if you need cool air, simply turn on the air conditioning switch, then press the A/C button, and rotate the temperature control to the blue position. If it's an automatic air conditioning system, just press the auto and A/C buttons to light them up. Below is an introduction to air conditioning cooling: 1. When the compressor is working, it sucks in low-temperature and low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the gaseous refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature and high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy into a liquid. 2. When the liquid refrigerant flows through the throttle device, its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature and low-pressure liquid refrigerant absorbs heat from the inside air passing through the evaporator, causing it to evaporate into a gas. The gas is then sucked into the compressor for the next cycle. In this way, through the circulation of the refrigerant within the system, the heat from the inside air is continuously absorbed and expelled to the outside air, gradually lowering the temperature inside the car.

5

2

Share

Will crossing the line at traffic lights result in penalty points?

When driving through a traffic light intersection, if a vehicle crosses the solid line, penalty points will be deducted. It is recommended that drivers reduce speed when approaching traffic light intersections, maintain proper distance between vehicles, and avoid crossing the line. Pay attention to traffic signs to prevent running red lights. Here are some tips for navigating traffic lights: 1. When passing through a straight intersection with only one set of traffic lights, follow normal traffic rules: stop when the light is red and proceed when it is green. At intersections where U-turns are allowed, you can make a U-turn regardless of the traffic light. Some intersections may allow U-turns only when the light is red, so pay attention to the specific rules. If you see a 'No U-turn' sign, U-turns are prohibited at that intersection. Be flexible in understanding traffic light instructions and avoid running red lights. 2. When passing through a T-intersection, there are two scenarios: First, vehicles making a U-turn or right turn do not need to rely on traffic lights—just ensure safety when turning left. Second, vehicles making a U-turn do not rely on traffic lights, but left-turning vehicles must follow the traffic light signals, while right-turning vehicles still do not need to rely on them. Always observe traffic signals carefully to avoid violations.

15

5

Share

How to Solve Frost on the Car Windshield in Winter?

You can use a cloth dipped in dishwashing liquid or a special anti-fog agent to wipe the inside of the windshield, which can effectively remove frost from the windshield. Alternatively, you can turn on the air conditioning for a while to let the cold air disperse the fog, then switch to the heater and adjust the air conditioning to blow directly at the windshield. The hot air blown out will evaporate the frost. Below are the reasons for frost forming on the car windows: 1. Frost forming inside the window is mainly due to the high humidity inside the car and the significant temperature difference between the inside and outside when the car is parked. 2. When driving in winter, the heater is usually turned on to raise the temperature inside the car, improving driving comfort. Therefore, when parked, the temperature inside the car is generally higher than outside. 3. After the car is turned off, the temperature cannot remain high indefinitely. If the air humidity inside the car is high at this time, the moisture in the air will condense on the windows as the temperature drops. When the temperature falls to a certain level, the water droplets on the windows will freeze into frost.

4

5

Share

What are the four main components of a clutch?

A clutch is basically composed of the following four parts: 1. Driving part: flywheel, clutch cover, pressure plate. 2. Driven part: driven plate, driven shaft. 3. Compression mechanism: compression spring. 4. Operating mechanism: clutch pedal, release rod, release fork, release sleeve, release bearing, release lever, etc. Here are the relevant introductions: 1. Working principle of the clutch: The engine flywheel is the driving part of the clutch, and the driven plate with friction lining and the driven hub are connected to the driven shaft through sliding splines; the compression spring presses the driven plate against the flywheel end face. The engine torque is transmitted to the driven plate through the friction between the flywheel and the driven plate contact surface, and then transmitted to the driving wheel through the driven shaft and a series of components in the transmission system; the greater the compression force of the compression spring, the greater the torque the clutch can transmit. 2. Function of the clutch: Since the car needs to maintain power transmission frequently during driving, and the interruption of transmission is only a temporary need, the driving part and the driven part of the car clutch are often in the engaged state.

20

1

Share

Can You Shift to P Gear After the Engine Stalls?

You can shift to P gear after the engine stalls. Both vehicles with gear levers and those with push-button gear shifting allow shifting to P gear after the engine is turned off. For vehicles with gear levers, if the engine is turned off without being in P gear, the vehicle will emit a warning sound, and the dashboard will display a corresponding alert. Push-button gear shifting vehicles are even more stringent—if the engine is turned off without being in P gear, the vehicle will remain powered, equivalent to being in the ACC (Accessory) mode. Only by shifting to P gear can the power be completely turned off. Below are some related details: 1. A car can be turned off in any gear. If the engine is turned off while in D (Drive) or R (Reverse) gear, restarting the vehicle may cause a sudden lurch, which can be dangerous. If the engine is turned off in N (Neutral) gear, the vehicle can move under external force, which also poses potential risks. 2. P (Park) gear is functionally similar to N gear in that both can disconnect the power transmission inside the transmission. However, P gear includes an additional locking mechanism that secures the output shaft, preventing both wheels from rotating in the same direction.

9

5

Share

How to Use the Wiper on Geely Emgrand?

What is the relationship between Haima and Mazda?

How to Turn on the Air Conditioning Cooling in the Car?

Will crossing the line at traffic lights result in penalty points?

How to Solve Frost on the Car Windshield in Winter?

What are the four main components of a clutch?

Can You Shift to P Gear After the Engine Stalls?

What does the appearance of Oillife mean in Honda?

Is Left Foot Braking or Right Foot Braking Better?

Is there a big difference between Bosch motors and Jinyu motors?

What is the principle of vehicle anti-skid control?