How to Use the Suspension Softness and Hardness Adjustment on the Mercedes-Benz S-Class?

1 Answers
OMadeline
07/24/25 11:13pm
Here is a detailed introduction to the suspension softness and hardness adjustment on the Mercedes-Benz S-Class: 1. The Mercedes-Benz GLC comes standard with the AGILITY-CONTROL suspension system, which mainly consists of steel springs and adjustable damping shock absorbers. 2. In the standard configuration, the Mercedes-Benz GLC suspension is set to comfort mode. However, after installing the AMG exterior package, the entire system will become stiffer to reduce cornering roll. As for the GLC350e and models equipped with the off-road package, the suspension system height is increased by 2 cm to provide higher ground clearance. 3. The Mercedes-Benz GLC offers the optional Air-Body-Control air suspension, which has five adjustable modes, including eco, comfort, sport, sport+, and custom mode. 4. In sport mode, the vehicle height can be lowered by 15mm, while in off-road mode, it can be raised by 15mm. If the off-road package is selected, the height can be further increased by 30mm or 50mm from the standard height. The suspension also uses glass fiber-reinforced materials to reduce weight while improving the response speed of the Mercedes-Benz GLC suspension.
Was this review help?
6
5
Share
More Forum Discussions

Where to Add Windshield Washer Fluid for Tiggo 5x?

Tiggo 5x's windshield washer fluid reservoir is located on the left side of the engine compartment, featuring a blue cap. Open it to fill with washer fluid, but avoid overfilling and ensure the level does not exceed the MAX mark. Here are some relevant details: 1. Tiggo 5x's windshield washer fluid is formulated with multiple surfactants and additives, providing functions such as wetting, penetration, and solubilization to effectively clean and remove dirt. It significantly lowers the freezing point of the liquid, offering antifreeze properties and quickly dissolving frost. It prevents fog droplet formation, ensuring clear visibility through the windshield. Additionally, it neutralizes static charges on the glass surface, providing anti-static properties, and acts as a lubricant to reduce friction between wipers and the glass, preventing scratches. 2. Generally, windshield washer fluids on the market fall into three main categories: (1) Summer-use formulas, which include insect-removing agents to quickly eliminate insect residues on the windshield and effectively clean insect marks on the front of the vehicle. (2) Antifreeze formulas specifically designed for winter use, ensuring the fluid does not freeze or damage car components even when temperatures drop below -20°C. (3) Special antifreeze formulas that remain unfrozen at temperatures as low as -40°C, suitable for extremely cold regions in the northernmost parts of the country.
8
4
Share

Which Toyota SUVs are purely imported?

Toyota's fully imported SUV models available in the domestic market mainly include the Toyota RAV4 Rongfang, Prado, Land Cruiser, Sequoia, Fortuner, FJ Cruiser, 4Runner, Venza, and others. Introduction to the TJ Cruiser: The TJ Cruiser features a multi-layered dashboard design with a relatively high central console. The top LCD display adopts a through-type design, which represents a future trend in automotive development. Despite having an upper display, an additional screen is added near the steering wheel, enhancing the strong sense of technology. The TJ Cruiser is undoubtedly distinctive. The steering wheel deviates from the traditional circular design, featuring flat bottoms both at the top and bottom, which also offers excellent practicality. Introduction to the Toyota 4Runner: The 4Runner is equipped with three different four-wheel-drive systems. The full-time four-wheel-drive system is used in the top-tier LTD model of the 4Runner, identical to that in the Land Cruiser. The part-time four-wheel-drive system is further divided into two types: one is the basic version, applied in the standard SR5 model, featuring a knob-style switch without a rear differential lock, similar to the domestic Prado 3.5. The other is the advanced version, used in the off-road TRD model, which employs a lever-style switch and includes a rear differential lock, akin to the FJ Cruiser.
2
4
Share

Do traffic police charge parking fees for impounded vehicles?

Traffic police do not require parking fees for impounded vehicles; these costs are covered by the public security authorities. For sealed premises, facilities, or property, the administrative agency may entrust a third party for safekeeping. The third party must not damage, transfer, or dispose of them without authorization. Relevant regulations are as follows: 1. Article 26 of the Administrative Compulsion Law states that administrative agencies shall properly keep sealed or seized premises, facilities, or property, and must not use or damage them. If losses occur, the agency shall bear compensation liability. 2. For sealed premises, facilities, or property, the administrative agency may entrust a third party for safekeeping. The third party must not damage, transfer, or dispose of them without authorization. If losses are caused by the third party, the administrative agency shall first compensate and then has the right to seek reimbursement from the third party.
14
0
Share

Does a new car need a paint protection film?

It is recommended to apply a paint protection film to a new car. Here are the reasons: 1. Excellent elasticity: The elasticity determines whether the paint protection film can perfectly fit the car body, as different parts of the car have varying curvatures. 2. Superb anti-yellowing properties: Over time, the car paint may appear old due to yellowing, which is irreversible and cannot be delayed. The film's strong anti-yellowing properties help maintain the car's fresh, new look for a long time, with a warranty period of up to 10 years. 3. Crystal-like transparency: Paint protection films are generally transparent, and their excellent transparency allows them to blend seamlessly with the car, not affecting the paint color while further enhancing the car's brightness.
9
1
Share

What oil filter does the Haval H6 use?

The Haval H6 uses a Pingyuan brand oil filter with the model number JLX-408. The method for replacing the Haval H6 oil filter is as follows: 1. Run the engine until it reaches operating temperature. Then use a jack to lift the vehicle, engage the handbrake, and secure the front wheels with wooden wedges. 2. Drain the oil. There is an oil drain plug underneath the vehicle; simply unscrew it to allow the oil to flow out. 3. Unscrew the oil filter. The oil flow will slow down, at which point you can remove the oil filter for secondary draining. Removing the oil filter can be somewhat challenging and requires a specialized filter wrench. Allow the remaining oil in the compartment to drain completely. 4. Once all the oil has been drained, you can proceed to replace the oil filter. Use the filter wrench to install the new filter, tighten it, then secure the drain plug and lower the vehicle. 5. Open the new oil filter and apply a small amount of new oil to the sealing ring. Use a clean cloth to wipe off any oil and debris from the filter's mating surface. Install the new filter and tighten it with an appropriate oil filter wrench using the correct torque. Wipe the exterior and mating surface of the new filter clean. 6. Reinstall the drain plug, lower the vehicle, and refill with new oil. Check the oil level, then start the engine and let it idle and run at medium speed for a while. During this time, observe whether the oil filter is leaking. Once everything is normal, the job is complete.
13
2
Share

What does PRND mean in an automatic transmission car?

PRND in an automatic transmission car represents the four gear positions. The four gear positions are: 1. P stands for Park. It is used for parking. It utilizes a mechanical device to lock the car's transmission system, preventing the vehicle from moving. When the car needs to stay in a fixed position for an extended period or before leaving the vehicle after parking, the handbrake should be engaged and the gear lever pushed into the "P" position. 2. R stands for Reverse. It is used for backing up the vehicle. Usually, the safety button on the gear lever must be pressed before the lever can be moved to the "R" position. 3. N stands for Neutral. When the gear lever is in the "N" position, the power between the engine and the transmission is cut off. For brief stops, the gear lever can be placed in this position with the handbrake engaged, allowing the right foot to move away from the brake pedal for a short rest. 4. D stands for Drive. It is used for normal road driving. Due to different designs in various countries' car models, the "D" position generally includes gears from 1st to high gear or 2nd to high gear, and it automatically shifts gears based on changes in speed and load. By placing the gear lever in the "D" position, the driver can control the speed simply by adjusting the accelerator pedal.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.