How to Use the Seat Heating in Geely Vision X6?

How to Add Water to the Ford Mondeo Radiator?

Here is the method for adding water to the Ford Mondeo radiator: 1. Turn the pressure cap counterclockwise. If you hear a hissing sound, wait until the sound disappears before opening it. 2. Add an appropriate amount of coolant to the coolant expansion tank, ensuring the level is between the MAX and MIN marks on the tank. 3. With the coolant expansion tank cap open, start the engine. 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add more coolant to the expansion tank until the level reaches between the MAX and MIN marks again. 5. Reinstall the cap, ensuring the pressure cap is hand-tightened and fully seated.

18

0

Share

Should I reverse into the left or right side first in the Subject 2 parking test?

During the Subject 2 reverse parking test, the sequence for reverse parking is: right reverse parking—left exit—left reverse parking—right exit. Relevant information about Subject 2 is as follows: 1. Test scheduling: In April 2016, the "Decision on Amending the Provisions on the Application and Use of Motor Vehicle Driving Licenses" was officially implemented, allowing self-study for the direct test, and simultaneous scheduling of Subject 2 and Subject 3 for continuous testing. 2. Test content: According to Article 25 of the "Provisions on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123), the Subject 2 test includes: for large buses, tractors, city buses, medium-sized buses, and large trucks—pole test, hill start, parallel parking, single-plank bridge, curve driving, right-angle turn, narrow gate, continuous obstacles, bumpy road, narrow road U-turn, and simulations for highways, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling; for small cars, small automatic transmission cars, small automatic transmission cars for the disabled, and low-speed trucks—reverse parking, hill start (canceled from June 1, 2021), parallel parking, curve driving, right-angle turn; for three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles—pole test, hill start, single-plank bridge; for wheeled self-propelled machinery, trolleybuses, and trams—the test content is determined by the provincial traffic management department of the public security authority.

16

1

Share

Which Mazda model uses the SKYACTIV technology?

All Mazda vehicles utilize the SKYACTIV technology, which is not merely an engine technology but encompasses a comprehensive range of innovations. Mazda offers a variety of sedans and SUVs, including models such as the Axela (Mazda3), Atenza (Mazda6), and SUVs like the CX-30, CX-4, and CX-5. Taking the Mazda CX-5 as an example, its dimensions are 4555mm in length, 1842mm in width, and 1685mm in height, with a wheelbase of 2700mm. The CX-5 is equipped with the SKYACTIV engine technology, achieving a high compression ratio of 13:1. Under this high compression ratio condition, the CX-5 delivers superior fuel efficiency compared to other vehicles in its class.

12

0

Share

What does the steering wheel icon on the dashboard mean?

The appearance of a steering wheel icon on the dashboard indicates a power steering system malfunction. Normally, when the ignition switch is turned to ON, the computer performs a self-check and the warning light illuminates, then automatically turns off after ignition. If the warning light remains on after ignition, it signifies a fault in the power steering system. When this occurs while driving, it means the power steering system has failed. At this point, the power steering assistance may be weakened or completely lost, making the steering wheel significantly harder to turn than usual. This issue cannot be self-diagnosed or repaired, so it's recommended to drive to the nearest service station for professional repair. The power steering system assists drivers in adjusting the vehicle's direction by reducing the effort required to turn the steering wheel, and it also plays an important role in driving safety and fuel efficiency.

19

2

Share

What are the rules for clocking in for Subject 2?

Subject 2 study hours are divided into theoretical hours and practical operation hours. According to the "Motor Vehicle Driver Training Teaching and Examination Outline," for the commonly tested C1 and C2 driver's licenses, Subject 2 requires a total of 16 and 14 hours of clocking in, respectively. The following are precautions for novice drivers: 1. Adaptability: Adaptability depends not only on the sensitivity of reflex nerves but also on the ability to concentrate while driving. In addition to controlling the vehicle well in various environments, it is also necessary to avoid chatting or answering phone calls while driving to ensure safe driving. Once encountering a problem, do not panic; stay calm and recall the knowledge learned to handle the situation calmly. 2. Understand traffic regulations: "Traffic regulations" refer to the currently implemented traffic management laws and regulations in China. Understanding traffic regulations is a prerequisite and essential part of learning to drive. Through driving school training, individuals can gain an understanding of traffic laws, recognize traffic signs, know how to use turn signals, control speed, etc. Only after passing the Subject 1 exam can one have "close contact" with the car. 3. Passing intersections: This step is one of the contents of the Subject 3 exam. Through driving school training, one learns to slow down and observe at intersections, then analyze and judge whether to pass when there are traffic lights, when to pass when there are no traffic lights, and how to pass the intersection. This is very important for daily driving.

6

3

Share

Why Doesn't the Logo on Rolls-Royce's Wheel Hub Move?

The reason the logo on Rolls-Royce's wheel hub doesn't move is that Rolls-Royce has added an additional bearing and counterweight to the hub. This ensures that the logo on the hub remains stable and does not rotate with the wheel, appearing motionless visually no matter how fast the wheel spins. Taking the Rolls-Royce Dawn as an example, this car is a two-door, four-seat convertible sports car equipped with two engines: a high-power version 6.6-liter twin-turbocharged engine and a low-power version 6.6-liter twin-turbocharged engine. The high-power 6.6-liter twin-turbocharged engine delivers a maximum power of 442 kW and a maximum torque of 840 Nm, while the low-power version produces a maximum power of 420 kW and a maximum torque of 820 Nm. Both engines feature direct fuel injection technology and use aluminum alloy cylinder heads and blocks.

11

5

Share

How to Use the Seat Heating in Geely Vision X6?

How to Add Water to the Ford Mondeo Radiator?

Should I reverse into the left or right side first in the Subject 2 parking test?

Which Mazda model uses the SKYACTIV technology?

What does the steering wheel icon on the dashboard mean?

What are the rules for clocking in for Subject 2?

Why Doesn't the Logo on Rolls-Royce's Wheel Hub Move?

How to adjust the seats of Haval F7x?

How to Exit Navigation in Mercedes-Benz E300L?

Where are the rearview mirrors located?

Does the Passat have a hybrid model?