How to Use the Screen Mirroring Function in BMW X1?

Is It Normal for Water to Leak Under the Car Chassis After Turning on the Air Conditioning?

It is normal for water to leak under the car chassis when the air conditioning is turned on. The refrigerant flows into the evaporator inside the car, where it absorbs heat from the cabin air through contact with the evaporator. It is then compressed and expanded again, repeating this cycle to gradually remove heat from the cabin air. Since the air contains a lot of water vapor, when it encounters the extremely cold evaporator, it condenses into water, which then flows out from under the car chassis. Here are some precautions for using the car air conditioning: First, turn on the external air circulation: It is recommended to fully lower the windows for ventilation. After a few minutes, when the engine warms up, close the windows and start driving. At this point, do not rush to close the windows. Instead, set the air conditioning to maximum airflow and drive with the windows open for two to three minutes to allow the hot air inside the car to dissipate. Then, press the cooling button, and the cooling effect will be much better. Avoid using the air conditioning for too long after parking: Some car owners, seeking coolness, tightly close the doors and windows and rest in the car with the air conditioning on. This can easily lead to a dangerous increase in carbon monoxide concentration inside the car, potentially causing poisoning.

11

2

Share

What causes the car to not accelerate when stepping on the gas pedal?

If it only happens briefly during ignition, it might be due to severe engine carbon deposits where the fuel is absorbed by impurities, making it feel like no fuel is being added and causing difficulty in ignition. If the issue persists, it could be caused by excessive gum deposits blocking the fuel line or a malfunctioning fuel pump. In severe cases, cleaning is necessary, and it is also recommended to use fuel additives like MAFRA Multiway Tablets to help dissolve fuel gum, clean the fuel system, and promote safe combustion by removing engine impurities. Here’s how to properly step on the gas pedal: When driving uphill or downhill: Do not press the gas pedal all the way when going uphill. When using a low gear, it’s generally best to press the pedal halfway. Similarly, avoid fully depressing the gas pedal when climbing a slope. If the engine does not respond with increased RPM even after pressing the gas pedal three-quarters of the way while driving, shift to a lower gear and then press the gas pedal to accelerate. When starting the car: Do not press the gas pedal all the way when starting the engine. It’s better to keep it slightly above idle throttle. When starting off, it’s advisable to apply a small amount of throttle just before the clutch engagement point, with the throttle opening at a moderate level. Releasing the clutch should be coordinated smoothly with pressing the gas pedal, ensuring quick and precise movements.

12

5

Share

Is the Mercedes-Benz GLC domestically produced?

Mercedes-Benz GLC has domestic models, and it is a mid-size SUV. The following is the extended content about Mercedes-Benz GLC: Mercedes-Benz GLC Exterior: The new GLC long-wheelbase version continues the current design, still adopting an interior design similar to the C-Class, featuring classic dual-barrel instrument dials with red pointers and target-ring patterns. The minimalist wood-grain lacquered center console is paired with a 3-color adjustable ambient lighting system for the entire vehicle, equipped with an 8.4-inch high-resolution color display and a 13.97 cm color multifunctional instrument screen. Mercedes-Benz GLC Engine: The domestically produced Mercedes-Benz GLC uses two engines in total, one is a low-power 2.0-liter turbocharged engine, and the other is a high-power 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine has a maximum power of 145 kW, with a maximum torque speed ranging from 1,650 to 4,000 rpm, and a maximum power speed of 6,100 rpm. The high-power 2.0-liter turbocharged engine has a maximum power of 190 kW, with a maximum torque speed ranging from 1,800 to 4,000 rpm, and a maximum power speed of 6,100 rpm.

9

2

Share

How to Connect Bluetooth to Play Music in an Audi Car?

Audi car connection Bluetooth to play music method is: 1. First, turn on the Bluetooth of the matching mobile phone; 2. Turn on the car Bluetooth, press the multifunction key until the indicator light emits blue light; 3. According to the operation method of the mobile phone manual, set the Bluetooth mobile phone to search for Bluetooth devices; 4. After connecting Bluetooth, enter the phone interface and press the right corner button to enter the settings; 5. After opening the Bluetooth audio player option, press MEDIA to enter the media option. Taking the Audi A6 as an example, its body length, width and height are 5012mm, 1855mm and 1485mm respectively, which is a luxury car produced by Audi.

16

1

Share

Do Sedans Need to Warm Up in Winter?

Sedans need to warm up in winter, requiring idling for one minute before driving slowly. The reason is that immediately after ignition, the upper part of the engine lacks lubrication as oil has not yet circulated. It takes about 30 seconds after starting the engine for the oil pump to deliver oil to critical components such as pistons, connecting rods, and the crankshaft. When the vehicle starts, lubrication is not yet fully supplied during idling, making it prone to wear. Most engine component wear occurs within the first three minutes of a cold start. After sitting overnight, the lubricating oil on friction surfaces has largely drained away, leaving them without protective oil film.

15

1

Share

How to remove the maintenance wrench indicator on JAC Refine S3?

The method to remove the maintenance wrench indicator on JAC Refine S3 is: 1. Turn off the ignition switch; 2. Press and hold the adjustment rod at the lower right of the instrument panel; 3. Turn the ignition switch to the ON position; 4. After approximately 5 seconds, the maintenance indicator light will turn off, at which point you can release the adjustment rod. The JAC Refine S3 is positioned as a compact SUV, with body dimensions of 4345mm in length, 1765mm in width, and 1640mm in height, and a wheelbase of 2560mm. In terms of exterior design, the Refine S3 adopts a new design language, giving it high recognition and a fashionable appearance.

10

5

Share

How to Use the Screen Mirroring Function in BMW X1?

Is It Normal for Water to Leak Under the Car Chassis After Turning on the Air Conditioning?

What causes the car to not accelerate when stepping on the gas pedal?

Is the Mercedes-Benz GLC domestically produced?

How to Connect Bluetooth to Play Music in an Audi Car?

Do Sedans Need to Warm Up in Winter?

How to remove the maintenance wrench indicator on JAC Refine S3?

How to Understand the Left Turn Waiting Gesture?

Can You Drive in Loafers?

Is it normal for the car hood to get very hot after driving for a while?

What is the lifespan of Bosch iridium spark plugs?