How to Use the Rear Seat Three-Person Seat Belt?

1 Answers
LydiaFitz
07/30/25 8:26am
The usage of the rear seat three-person seat belt is as follows: The left and right seats in the rear are equipped with three-point seat belts, while the middle seat has a two-point seat belt. The method of fastening the seat belts for the left and right seats is the same as that for the driver and front passenger seats. The person sitting in the middle can only use the seat belt to secure their abdomen. When fastening the middle seat belt, simply pull it from one side and insert the buckle into the other side to secure the abdomen. Precautions for using seat belts are as follows: 1. First, regularly check the technical condition of the seat belt. If it is damaged, replace it immediately. 2. Second, correctly fasten the three-point lap seat belt. The seat belt should be worn as low as possible, around the hips, not the waist; the shoulder belt should not be placed under the arm but should be worn diagonally across the chest. Seat belts are for single use only; sharing between two people is strictly prohibited. Do not twist the seat belt when using it. 3. Third, when using the seat belt, ensure it does not press against hard or fragile objects, such as mobile phones, glasses, or pens in pockets. 4. Fourth, do not recline the seat back too much, as this may prevent the seat belt from retracting properly and affect its effectiveness.
Was this review help?
18
2
Share
More Forum Discussions

What is the Vehicle Environmental Protection List?

Definition: The full name of the Environmental Protection List is the Vehicle Environmental Protection Information List. According to the requirements of the Ministry of Environmental Protection's 'Announcement on the Disclosure of Environmental Protection Information for Motor Vehicles and Non-Road Mobile Machinery', starting from January 1, 2017, motor vehicle manufacturers and importers must disclose key environmental protection information in the form of a 'Vehicle Environmental Protection Information List' before the product leaves the factory or the goods enter the country. Notes: All parallel imported vehicles with complete documentation will come with an Environmental Protection List. The Environmental Protection List may either be on the back of the conformity certificate or a separate document. Having an Environmental Protection List does not necessarily mean the vehicle is environmentally disclosed.
8
0
Share

How long after driving a cloned vehicle can a revoked driver's license be retaken?

Driver's licenses revoked due to vehicle cloning must wait two full years before reapplying. Regulations on driving cloned vehicles: There are no specific regulations requiring license revocation for driving cloned vehicles. Using another vehicle's motor vehicle registration certificate, license plate, vehicle license, inspection compliance mark, or insurance mark will result in confiscation by the traffic management department of the public security authority, along with impoundment of the vehicle. Retaking after revocation: If the revocation notice specifies three or five years, one must wait until that period ends before reapplying. If no time limit is specified, the revocation is immediate, allowing one to apply for a new driver's license after a few days.
9
1
Share

Will points be deducted for crossing the line after turning?

It depends. If you cross the line before the red light turns on, you will definitely be penalized with 6 points. However, if you cross the line after the red light turns on, no points will be deducted, but you must stop immediately. Penalty regulations: Vehicles that change lanes arbitrarily or cross solid lines at traffic light intersections can easily cause minor traffic accidents. If caught by "electronic police," a fine may be imposed along with a 3-point deduction. Additionally, if drivers fail to pay attention to road traffic markings and vehicles arbitrarily cross solid yellow lines to drive in the opposite direction, they may be fined and penalized with 3 points. Lane driving notes: If a vehicle does not drive in the designated lane—for example, if it is supposed to turn left in the left-turn lane but suddenly chooses to go straight—a fine and a 2-point deduction may also be imposed.
12
1
Share

What do the numbers on the barcode of a new car key represent?

This barcode is primarily used for key matching, essentially serving as a "plaintext" password-like data (or the vehicle's ID card). The purpose of the barcode: Individuals should keep it safe. If the car owner loses the key and needs to get a replacement, this barcode is required. The 4S store can use the barcode to retrieve some of the vehicle's password information, which is relatively straightforward. If this barcode is lost: It can be matched via another key (after-sales service); If all keys are lost (including the barcode), an application can be made through after-sales service (such as using a security code). Once the rematching is completed, the previously lost key will become invalid.
18
0
Share

Which Wheel Does Belt Slippage Start From?

Belt slippage starts from the smaller pulley (it mostly occurs on the smaller pulley) because the wrap angle of the smaller pulley is smaller than that of the larger pulley. The wrap angle refers to the arc length over which the belt rolls on the pulley. Introduction to elastic slip: Elastic slip is a normal and unavoidable phenomenon caused by the elastic deformation of the belt material, which leads to deformation under force. Slippage is a failure mode of belt transmission, reducing transmission efficiency. It occurs when the force exerted on the belt exceeds its ultimate tensile strength. Reasons for belt slippage in automobiles: Slippage occurs on the smaller pulley due to the calculation formula for the minimum initial tension. The formula shows that the smaller the wrap angle, the greater the required initial tension. Generally, the smaller pulley has a smaller wrap angle, so it requires a higher minimum initial tension. When the initial tension is less than this minimum, slippage occurs.
16
0
Share

What does the 'AT' warning light on a car indicate?

AT light indicates a transmission fault. Symptoms: Symptoms of transmission warning light activation include jerking, abnormal noises, slipping, and impact issues, which require immediate repair. Try turning off and restarting the engine to see if it returns to normal. If it does not return to normal or there is gear shifting impact, it is generally a real fault in the transmission system. Specific causes of transmission faults: Transmission oil leakage; engine stalling, no response, or impact when shifting into gear; engine stalling when shifting into D or R, possibly caused by a damaged lock-up solenoid valve or a stuck lock-up control valve; transmission slipping, lack of acceleration; transmission water ingress, etc.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.