How to use the navigation on the Roewe RX3 screen?

2 Answers
HarrisonFitz
07/29/25 2:03am
The method to use navigation on the Roewe RX3 screen is: regularly upgrade the system, and after upgrading, directly enter the navigation interface. The Roewe RX3 is a compact SUV under SAIC Motor. Taking the Roewe RX3 2020 Manual Super Cool Edition as an example, its body dimensions are: length 4408mm, width 1804mm, height 1651mm, wheelbase 2625mm, fuel tank capacity 48 liters, and trunk capacity 485 to 1474 liters. The Roewe RX3 2020 Manual Super Cool Edition is equipped with a 1.6L naturally aspirated 4-cylinder engine, with a maximum power of 92 kW and a maximum power speed of 6000 rpm.
Was this review help?
3
3
Share
Lester
08/12/25 6:04am
When I usually drive my Roewe RX3, the navigation is particularly convenient. The large screen operates smoothly and intuitively. Just tap the navigation icon on the screen to enter the system, then use the virtual keyboard to input the destination or directly give a voice command to say where you want to go. It supports CarPlay, and I often connect my iPhone to sync Apple Maps, which also provides real-time traffic information to avoid congestion. The voice prompts for turns and speed limits while driving are super considerate, preventing distractions from constantly looking down at the screen. It’s best to regularly update the map data for free on the official website to ensure route accuracy. As a tech enthusiast, these integrated features make my trips incredibly hassle-free, especially during long journeys when the screen clearly displays route details, even including gas station recommendations.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What model is the Porsche 992?

Porsche 992 is a codename, representing the all-new Porsche 911. The initial release of the new 911 is the Carrera-S series models. Powertrain: Equipped with an upgraded 3.0-liter turbocharged horizontally opposed six-cylinder engine, delivering a maximum power output of 450 horsepower and peak torque of 530 Nm. The transmission system is paired with a new 8-speed PDK dual-clutch gearbox. Exterior design: Wider and larger dimensions with evolved exterior details, featuring standard wide-body styling for enhanced visual impact. The front section of the body is widened by 45mm; the base model achieves GTS-level aesthetics; the louver-style grilles on both sides of the front bumper are more streamlined; first-time implementation of electrically extending flush door handles; new LED matrix headlights; rear features a full-width LED light bar design; redesigned rear bumper; relocated exhaust pipes, license plate, and high-mounted stop lamp positions. Interior: Significantly upgraded technological interior, featuring Panamera-style digital instrument cluster; central tachometer retains traditional analog display; center console incorporates a 10.9-inch touchscreen; touch-sensitive controls below the center console; redesigned gear selector, among other improvements.
18
5
Share

How to Manually Start a BMW 5 Series with the Key?

BMW 5 Series features a keyless start system, so it cannot be manually started with the key. Here’s more information about starting a BMW 5 Series: 1. Unlock the Car: Since we’re discussing starting, let’s begin from the beginning. When the car is locked, first unlock it by pressing the top button on the key (a lock-open symbol). Once unlocked, place the key inside the car (preferably in the center console area), as it will still be needed for starting. 2. Press the Brake: Although starting a BMW doesn’t require inserting a key, you still need to press the brake pedal like in other cars. Then, press the start button located next to the steering wheel (a small round button on the right side). 3. Fasten Your Seatbelt: Once the car is started, it’s advisable to fasten your seatbelt immediately to avoid forgetting later. 4. Shift Gears: After starting, the car remains in Park (P). To shift gears, keep the brake pedal pressed, then use your left thumb to press the rectangular button on the left side of the gear lever and push it up or down to select the desired gear. 5. Depart: Before shifting out of Park (while still in P), step out and check for any obstacles around the car. Once you’ve shifted gears, you’re ready to go.
12
0
Share

How to Get a 128,000 Yuan Discount When Buying a NIO Car?

Buy the car without purchasing the battery. Below is an introduction to the NIO ES6: 1. Exterior: The ES6 is a brand-new model, essentially a scaled-down version of the ES8. It features the same family-style front fascia, body side lines, floating roof design, and similar rear styling, all with split headlight clusters. However, there are some differences in details. For example, the ES6's front face eliminates the large chrome accents, adopts a single-side two-light cluster, and has a smaller grille. Despite these changes, the overall resemblance to the ES8 remains high, with a visually striking appearance, though the overall presence is slightly less imposing than the ES8. 2. Interior: The dashboard layout is similarly close, with over 90% similarity between the ES6 and ES8 interiors. The continuous air vents, 8.8-inch digital instrument cluster, and button layouts are very alike. However, the ES6's central touchscreen is upgraded from the ES8's 10.4 inches to 11.3 inches, giving it a more premium look. Other details, such as the air vent design, three-spoke steering wheel, and multifunction button layouts, differ slightly. Of course, the new car's dashboard is generously wrapped in soft materials, and all models come standard with leather seats, ensuring excellent quality. 3. Performance: The ES6 comes in a base version and a performance version. The ES6 is sold through a personalized customization and build-to-order model.
15
2
Share

What License is Required to Operate a Crawler Crane?

Operating a crawler crane requires applying for a Special Operations Permit. Below is relevant information about the Special Operations Permit: 1. Introduction: This is a certificate issued by the State Administration of Work Safety for special industries under an access filing system, certifying that the holder has undergone professional training in safety technology, laws and regulations, and professional ethics, and is registered with the local work safety supervision bureau. 2. Covered Personnel: Special operations personnel include: electrical workers, metal welding and cutting workers, lifting machinery operators, drivers of specialized motor vehicles within premises (factories), high-altitude erection workers, boiler operators (including water quality testing), pressure vessel operators, refrigeration workers, vertical transport machinery operators, installation and dismantling workers, lifting signalers, etc., as well as other operations proposed by provincial, autonomous region, or municipal work safety comprehensive management departments or industry authorities under the State Council and approved by the former State Economic and Trade Commission.
5
0
Share

What to Do When a Tire Gets a Cut?

If a tire gets a cut, it must be removed from the rim and inspected by a professional tire dealer to determine if it can be repaired. Below are specific details regarding tire cuts: Situations where the tire cannot be repaired: The sidewall cannot be repaired, as it flexes and deforms during driving, making it a deformation zone where repair materials can easily fall off, leading to air leakage; puncture holes in the tread exceeding 6 mm in diameter cannot be repaired; if there is bead damage or deformation, tread deformation, rubber corroded by chemicals, or damage from driving under-inflated; other abnormal conditions where the tire cannot be repaired, such as visible signs of under-inflation (e.g., sidewall scuffing, inner liner bubbling, etc.), as the tire structure may already be compromised and unsafe for further use.
17
2
Share

What are the reasons for the difficulty in starting a Land Rover Freelander 2 when it's hot?

Introduction to the reasons for the difficulty in starting a Land Rover Freelander 2 when it's hot: 1. Fuel injector leakage: The fuel injector sprays fuel normally, but leakage means additional fuel supply, so the more severe the fuel injector leakage, the richer the air-fuel mixture, leading to difficulty in starting when hot. 2. Damaged carbon canister solenoid valve: During hot starts, fuel atomization is normal and no additional fuel vapor is needed. If the carbon canister continues to supply fuel vapor to the intake tract, it will cause an overly rich air-fuel mixture, making it difficult to start. 3. Fuel quality: After the hot engine is turned off for a while, the engine compartment temperature remains high. If the fuel is highly volatile, it can form high vapor pressure in the fuel rail. When this pressure exceeds the fuel supply system's pressure, vapor lock occurs, causing the fuel injector to spray overly lean fuel vapor, leading to difficulty in starting. 4. Intake air temperature sensor: The intake air temperature sensor is similar to the coolant temperature sensor, both correcting the fuel injection amount. However, if the coolant temperature sensor fails, it causes difficulty in cold starts, while a faulty intake air temperature sensor leads to difficulty in hot starts. 5. Engine carbon deposits: Carbon deposits have a strong adsorption effect on gasoline. If there are significant carbon deposits on the intake valves, throttle, or pistons, they can adsorb some fuel, causing an overly lean air-fuel mixture and affecting starting. This issue can also occur during cold starts.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.