How to Use the Mechanical Key of Sagitar?

1 Answers
JanelleMarie
07/29/25 3:54pm
The method to use the mechanical key of Sagitar is as follows: 1. Insert the key into the ignition and turn it to the 'on' position; 2. Place the gear lever in the neutral position; 3. Press the clutch pedal all the way down and turn the key to the 'start' position. Taking the 2021 manual Fashion Smart Connection Edition Sagitar as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm, a fuel tank capacity of 50 liters, and a minimum ground clearance of 2731mm. The 2021 manual Fashion Smart Connection Edition Sagitar features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
Was this review help?
5
2
Share
More Forum Discussions

Differences between Dunlop VE302 and VE303

1. Comfort: The VE303 features a new tread pattern design, which provides a higher outer ground contact area ratio, enhancing stability and delivering excellent directional performance. The VE303 utilizes nylon belts with varying rigidity strengths, creating a hybrid belt that balances softness and high rigidity, effectively suppressing noise caused by driving vibrations. The VE302 incorporates improved cords that are thicker and more flexible, offering 1.3 times the strength of standard cords. This ensures smooth and stable driving even on rough roads, delivering a comfortable ride. 2. Performance: A notable feature of the VE303 is the 55% reduction in the volume of lateral grooves, which are a primary cause of tread noise. This significantly lowers tread noise, improving comfort and quietness. The VE302 is equipped with high-strength side belts on both sides of the tire. These belts help reduce road noise by wrapping around the steel belt edges, where vibrations are most intense, effectively dampening vibrations even on rough surfaces.
5
0
Share

What are the differences between the Vellfire, Alphard, and Vellfire?

Below are the specific differences between the Vellfire and Alphard: 1. Overall body dimensions: The Alphard is an MPV under Toyota, with dimensions of 4975(mm) x 1850(mm) x 1945(mm) and a wheelbase of 3000(mm); the Vellfire is also an MPV under Toyota, with dimensions of 4975(mm) x 1850(mm) x 1945(mm) and a wheelbase of 3000(mm). The body dimensions of the Alphard and Vellfire are identical. 2. Powertrain: The Alphard is equipped with a 2.5L naturally aspirated engine, producing a maximum horsepower of 117Ps, maximum power of 86kW, and maximum torque of 198N·m, paired with an E-CVT continuously variable transmission. It also features an electric motor with a maximum horsepower of 211Ps and maximum power of 155kW. The Vellfire is equipped with the same 2.5L naturally aspirated engine, producing a maximum horsepower of 117Ps, maximum power of 86kW, and maximum torque of 198N·m, paired with an E-CVT continuously variable transmission, and also features an electric motor with a maximum horsepower of 211Ps and maximum power of 155kW.
11
5
Share

How is the Mazda6 Atenza's engine?

The Mazda6 Atenza is equipped with the SKYACTIV engine. Here is an introduction to the SKYACTIV engine: 1. Engine classification: Gasoline engine and diesel engine. 2. Body structure: The SKYACTIV body achieves top-level collision safety performance. The new-generation lightweight and high-rigidity body better supports the pursuit of "driving pleasure." It combines the dual advantages of high rigidity and lightweight (8% weight reduction, 30% strength increase). The basic framework adopts a "straight structure" composed of straight lines as much as possible, and a "continuous structure" that coordinates connecting parts to maximize their effectiveness.
12
5
Share

How long should I warm up my car if it hasn't been driven for several days?

Cars that haven't been driven for a long time only need to be warmed up for 30 seconds to 1 minute. Here are the relevant details: 1. The method for warming up a car is as follows: (1) Start the vehicle with the air conditioning turned off. (2) Let the car idle for 1 minute to warm up. (3) Drive slowly after the engine runs smoothly. (4) Once the temperature gauge rises by 1 to 2 bars, you can drive normally and turn on the air conditioning. 2. The reasons for warming up a car are as follows: (1) After prolonged parking, the engine oil flows back into the oil pan. (2) Before the engine reaches its operating temperature, the fuel supply system cannot effectively vaporize gasoline completely due to lower temperatures. (3) When parked, the gear oil flows to the lower part of the transmission, leaving the upper part without lubrication during a cold start.
12
0
Share

How long is the Odyssey body?

The dimensions of the Odyssey are 4861mm in length, 1820mm in width, and 1712mm in height, which are official data. The length of the Odyssey refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane. The Odyssey's turbocharged engine has a maximum power of 107kW and a maximum torque of 175 Nm. This engine delivers a maximum horsepower of 146 and reaches its maximum torque at 3500 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an electronic continuously variable transmission. There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is designed to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that under national standards, the significance of vehicle width data is to ensure adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
1
5
Share

What Does the Sun Exclamation Mark on the Car Dashboard Represent?

Car dashboard sun exclamation mark represents automatic transmission failure. In such cases, the vehicle should be sent to a 4S shop or a professional auto repair shop for inspection and repair as soon as possible. Before driving, it is advisable to conduct a vehicle condition check. During driving, pay attention to any abnormal conditions of the vehicle and perform regular car maintenance to prevent driving hazards. The following is an introduction to car maintenance: 1. Definition of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the maintenance of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers to prevent failures, slow down the deterioration process, and extend the service life.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.