How to use the lights on Audi A3?
3 Answers
Audi A3 lights are used by: with the ignition switch turned on, move the control lever to the corresponding position to activate the respective lights. Car lights are icons that display the usage status of the car lights when they are turned on. The lights have the function of illumination, as well as the role of indication and warning. Taking the 2021 Audi A3 as an example, its body dimensions are: length 4351mm, width 1815mm, height 1458mm, with a wheelbase of 2630mm. The 2021 Audi A3 is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm, matched with a 7-speed dual-clutch transmission.
I remember when I first started driving the Audi A3, the light controls were a bit challenging, but I got the hang of it quickly. There's a control stalk on the left side of the steering wheel with a rotary knob. For everyday driving, you can set it to auto mode, and the lights will turn on and off automatically based on the daylight. Rotate the knob to the parking light position, and the front and rear lights will illuminate; turn it one more notch to turn on the low beams, which are essential at night or when entering tunnels. To activate the high beams, gently push the stalk forward—the high beam icon will light up to confirm it's on. In rainy or foggy conditions, pull the stalk down once for the front fog lights and twice for the rear fog lights. For turning signals, move the stalk up or down for left or right turns, respectively. In emergencies, press the triangular button to activate the hazard warning lights. I recommend that beginners familiarize themselves with these positions to avoid operational errors that could affect driving. The Audi A3's lighting system is designed to be user-friendly, but don't forget to regularly check the bulb conditions to ensure nighttime driving safety.
After getting used to the Audi A3, I find its lighting controls really handy. I usually locate the lighting stalk on the left side of the steering wheel and rotate the end knob to switch modes: AUTO is the most effortless, automatically turning on lights when it gets dark; manually switching to parking lights or low beams is also straightforward. Activating high beams just requires a gentle push of the stalk—a quick push flashes the lights temporarily, while holding it in position keeps them on continuously. In foggy conditions, pulling the stalk turns on the fog lights for better visibility. For turn signals, a simple flick in the desired direction does the trick, and in emergencies, pressing the central triangular button activates the hazard lights. For daily use, I highly recommend relying on the AUTO function—it minimizes manual adjustments and helps maintain focus. Here’s a handy tip: if you need to adjust the headlight height, you can do so via the instrument cluster menu. Don’t overlook maintenance—check that the lens covers are clean during each car wash to ensure optimal brightness. Safe driving relies on mastering these small details, and once you’re familiar, they become incredibly practical.
