How to Use the Cruise Control on Baojun 310?

1 Answers
Anne
07/24/25 2:52am
The method for using the cruise control on Baojun 310 is as follows: 1. Press the ON/OFF key to activate the system, at which point the cruise control indicator on the dashboard will light up. 2. Accelerate to the desired speed (above 40km/h), then press the SET key. At this point, you can release the accelerator with your right foot, and the speed will be set at the current speed. 3. Press "RES+" to increase the speed at the current setting, or press "SET-" to decrease the speed at the current setting. 4. There are three ways to deactivate the cruise control: press the brake, press the CANCEL key, or press the ON/OFF key. 5. If the cruise control is deactivated by pressing the brake or the CANCEL key, you can press the RES key to resume the previous cruise control speed.
Was this review help?
20
3
Share
More Forum Discussions

How to Use Mercedes-Benz Keyless Entry?

Mercedes-Benz keyless entry usage: After the system detects the key, the car system will automatically unlock within approximately 1.5 meters, allowing you to open the door and enter the vehicle. You can then directly start the car engine inside. Below is an introduction about Mercedes-Benz cars: 1. Introduction: Mercedes-Benz, a German luxury car brand, is the inventor of the automobile and is considered one of the most successful premium car brands in the world. 2. Brand: In October 2020, Interbrand ranked it eighth in the list of the world's top 100 brands.
13
4
Share

How Often Does the Luzun Need Maintenance?

The new Luzun vehicle requires its first maintenance within 6 months or 5,000 kilometers (whichever comes first), with the first service being free of charge. This includes changing the engine oil, oil filter, and transmission fluid, along with a comprehensive inspection of all vehicle components. Subsequent maintenance should be performed every 5,000 kilometers. Below is an introduction to the Luzun's maintenance schedule: 1. After driving 5,000 kilometers, the engine oil and oil filter need to be replaced; at 10,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter. 2. At 15,000 kilometers, replace the engine oil, oil filter, and cabin air filter; at 25,000 kilometers, replace the engine oil and oil filter. 3. At 20,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter; at 30,000 kilometers, replace the engine oil, oil filter, air filter, cabin air filter, and fuel filter. 4. At 35,000 kilometers, replace the engine oil and oil filter; at 40,000 kilometers, replace the engine oil, oil filter, air filter, fuel filter, brake fluid, and power steering fluid. 5. At 45,000 kilometers, replace the engine oil, oil filter, and cabin air filter; at 50,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter. 6. At 55,000 kilometers, replace the engine oil and oil filter; at 60,000 kilometers, replace the engine oil, oil filter, air filter, cabin air filter, and fuel filter. 7. The fuel filter and air filter should be replaced every 10,000 kilometers, and the cabin air filter should be replaced annually or approximately every 20,000 kilometers.
18
5
Share

What brand is the ltwoo transmission?

ltwoo transmission is a blueprint transmission, produced by Zhuhai Blueprint Controller Technology Co., Ltd. The relevant introduction is as follows: 1. Through continuous independent innovation, Blueprint has developed the AT1, AX, A7, A5, and A3 series of transmissions, with key products including 11-speed, 10-speed, 9-speed, 8-speed, 7-speed, and 6-speed kits. 2. Blueprint is dedicated to the research and production of mountain bike/civilian bicycle kits. Blueprint is gradually expanding its layout in high-end products and road bike products, focusing on Asian ergonomics during development to provide good feel and accuracy at a relatively low price.
19
5
Share

Principle of Silicone Oil Fan Clutch

The working principle of the silicone oil fan clutch is relatively simple. This type of clutch uses silicone oil as the medium. When the temperature is low, the silicone oil does not flow, and the fan clutch disengages. When the temperature is high, the viscosity of the silicone oil causes the fan clutch to engage, allowing the fan to rotate. Below is a related introduction to the silicone oil fan clutch: 1. When the engine load increases and the coolant temperature rises, the temperature of the airflow passing through the radiator core also increases. The high-temperature airflow blows on the bimetallic temperature sensor, causing the bimetallic strip to deform due to heat, which drives the valve plate transmission pin and control valve plate to deflect at an angle. 2. When the temperature of the airflow blowing on the bimetallic temperature sensor drops below 35°C due to reduced engine load or other reasons, the control valve plate closes the oil inlet hole, and silicone oil no longer enters the working chamber. The silicone oil originally in the working chamber continues to return to the oil storage chamber under centrifugal force until it is completely drained. At this point, the clutch is disengaged again, and the fan idles and slips.
9
0
Share

Why is there no environmental protection label after the vehicle inspection?

Environmental protection labels have been abolished, so there is no such label after the vehicle inspection. The details are as follows: 1. Introduction: According to the relevant regulations in the "Notice on Further Standardizing Emission Inspections and Strengthening Environmental Supervision and Management of Motor Vehicles" jointly issued by the Ministry of Public Security and the Ministry of Environmental Protection: Strictly implement the motor vehicle emission inspection system. Motor vehicle emission inspection agencies must strictly adhere to the emission inspection standards and upload the emission inspection data and electronic inspection reports to the environmental protection department, issuing a unified emission inspection report coded by the environmental protection department. 2. Explanation: The abolition of the motor vehicle environmental protection label does not mean that the periodic emission inspection results of motor vehicles are no longer valid. Motor vehicles must pass the emission inspection to obtain the safety inspection label. The new regulation essentially means that the environmental protection label and the safety inspection label have been merged into one.
14
4
Share

How to Deactivate a Car Anti-Theft System?

The steps to deactivate a car anti-theft system are as follows: 1. Locate the wiring distribution of the anti-theft system, which is usually found under the steering wheel or behind the A-pillar trim panel, then simply disconnect the input wire of the anti-theft device to deactivate it; 2. Some anti-theft devices have fuse protection, in which case you need to locate the corresponding fuse position and remove it to deactivate the car anti-theft system. A car anti-theft system is designed to prevent the theft of the vehicle itself or items inside the car. It consists of an electronically controlled remote or key, an electronic control circuit, an alarm device, and actuators.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.