How to Use Rearview Mirrors When Driving in an S-Curve?

How to Replace Coolant in the New Passat?

New Passat coolant replacement method: The front grille needs to be removed, which can be detached directly with a screwdriver. After removing the screws, pry it open by hand to reveal the drain port. Unscrew the drain plug with a screwdriver while opening the coolant filler cap. Wait until the colored coolant is mostly drained, then screw the drain plug back in and refill with new coolant. The Passat is a mid-size sedan brand designed by Volkswagen in Germany, with body dimensions of 4870mm in length, 1834mm in width, and 1472mm in height, and a wheelbase of 2803mm. In terms of appearance, the Passat PHEV is largely similar to the fuel version but features some PHEV-exclusive identity markers, such as exclusive body emblems. On the sides of the body, PHEV side badges are added to both front fenders, and the model adopts PHEV-exclusive low-drag wheels. The exclusive welcome step trim also highlights the hybrid model's identity.

1

4

Share

How to fold the rear seats of the Wuling Hongguang S?

Method for folding the rear seats of the Wuling Hongguang S: 1. Remove the seat belt buckle from the seat gap; 2. Lay the seat back flat. There is a button on the top of the seat back—press it to lower the backrest; 3. At the very bottom of the seat, there is a pull strap on each side. Gently pull them upward; 4. Lift the seat upward, fold it backward, and insert the pin to secure the seat. The Wuling Hongguang S is an MPV launched by SAIC-GM-Wuling, with dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, and a wheelbase of 2720mm. It is equipped with 1.2L and 1.5L naturally aspirated engines, paired with a 5-speed manual or 6-speed manual transmission.

5

Share

Are Car Wipers One Long and One Short?

Most vehicle models have one long and one short wiper, with the longer one on the driver's side and the shorter one on the passenger side. Wipers are tools installed on the front windshield of motor vehicles to simply clear away rainwater and other debris that may obstruct vision. During rainy weather, they sweep raindrops off the glass surface, ensuring clear and unobstructed visibility for the driver. Wiper Replacement Cycle: Wipers are generally replaced about once a year, but this mainly depends on the frequency of use. After each rain, remember to clean the wiper blades with a towel, which not only extends their lifespan but also protects the windshield. Precautions for Using Wipers: Always ensure the front windshield is wet before using the wipers. The wiping part of the wiper blades is made of natural rubber material. Wiping on a completely dry windshield can cause excessive friction, damaging the rubber surface and affecting wiping performance. Additionally, promptly remove any debris from the wiper rubber strips and the glass surface. These impurities can increase friction between the rubber strip and the glass during wiper operation, potentially damaging the rubber or scratching the glass surface, leading to unclear wiping.

16

5

Share

How often should a three-way catalytic converter be cleaned?

Generally, a three-way catalytic converter should be cleaned every 20,000 to 30,000 kilometers of normal driving, but vehicle owners should adjust the cleaning frequency based on actual usage conditions. If there are issues with exhaust emissions or if the vehicle still lacks power after cleaning the fuel injectors and throttle body, it may indicate a clogged three-way catalytic converter, requiring prompt inspection and cleaning. The three-way catalytic converter is an essential external purification device installed in the vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Known for its stable performance, reliable quality, and long lifespan, this product is widely compatible with models from Toyota, Honda, Buick, Audi, Volkswagen, Hyundai, Suzuki, Changhe, and more.

9

4

Share

How often should the brake pads on a Golf 6 be replaced?

Golf 6 brake pads should be replaced every 40,000 to 60,000 kilometers. Brake pads, also known as brake linings, consist of a steel plate, an adhesive heat insulation layer, and a friction block. The Golf 6 is a compact 5-door, 5-seat hatchback with body dimensions of 4199mm in length, 1786mm in width, 1479mm in height, and a wheelbase of 2578mm. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 77kW and a maximum torque of 155Nm. The car features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.

13

5

Share

What is the acceleration time of the Mazda 3 1.5?

The Mazda 3 1.5 accelerates from 0 to 100 km/h in approximately 12 seconds. The 0-100 km/h acceleration time is a direct reflection of a car's power. Taking the 2020 Mazda 3 as an example, its body dimensions are: length 4662mm, width 1797mm, height 1445mm, with a wheelbase of 2726mm and a fuel tank capacity of 50 liters. The 2020 Mazda 3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 86kW and a maximum torque of 148Nm, paired with a 6-speed manual transmission. It features a MacPherson strut front suspension and a torsion beam rear suspension.

20

5

Share

How to Use Rearview Mirrors When Driving in an S-Curve?

How to Replace Coolant in the New Passat?

How to fold the rear seats of the Wuling Hongguang S?

Are Car Wipers One Long and One Short?

How often should a three-way catalytic converter be cleaned?

How often should the brake pads on a Golf 6 be replaced?

What is the acceleration time of the Mazda 3 1.5?

What is a Full Body Kit for Sedans?

What is the reason why the car key cannot be pulled out and the engine cannot be turned off?

What does it mean when the car wiper shows a yellow light?

What Does Car Engine Torque Mean?