How to Turn on the Rear Fog Light of the Passat?

1 Answers
SanJameson
07/29/25 4:12pm
Method to turn on the rear fog light of the Passat: Rotate the headlight switch to the position of the small light or headlight, then pull the switch upward. Pulling one notch turns on the front fog light, and pulling two notches turns on both the front and rear fog lights. Below is relevant information about rear fog lights: Function of fog lights: 1. Fog lights generally refer to automotive fog lights, installed at the front and rear of the vehicle. 2. Because visibility is low in foggy conditions, the driver's line of sight is limited. 3. The lights can increase the running distance, especially the strong light penetration of yellow anti-fog lights, which can improve the visibility for the driver and surrounding traffic participants, allowing oncoming vehicles and pedestrians to spot each other from a greater distance.
Was this review help?
9
0
Share
More Forum Discussions

What is the fuel tank capacity of the Corolla 1.6 in liters?

The fuel tank capacity of the Corolla 1.6 varies between 43L and 50L depending on the configuration. The vehicle features a turbocharged intake system, a continuously variable transmission (CVT), a front McPherson independent suspension, and a rear E-type multi-link independent suspension. In the same vehicle class, the Volkswagen Bora has a fuel tank capacity of 50L, while the Honda Civic has a capacity of 47L. During the actual refueling process, the amount of fuel filled may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' (Empty) and 'F' (Full). When the needle is close to 'E', it indicates low fuel, and when it is near 'F', it means the tank is full.
5
0
Share

How many kilometers can WM's 400km range actually drive?

WM's 400km range version can actually drive 400km. WM's range versions: WM has three range versions: 300, 400, and 500, corresponding to NEDC ranges of 300km, 400km, and 460km, respectively. WM's configurations: The WM EX5 comes standard with a liquid-cooled battery and offers optional heating components. There are two types of heating components: one is the PTC electric heating system, and the other is the diesel extreme heating system. WM's official recommendation is that users south of the Qinling-Huaihe line do not need to install the electric heating system, while users north of the Qinling-Huaihe line, south of the middle and lower reaches of the Yellow River, and in the southern Xinjiang region should install the electric heating system. Users in Northeast China, Inner Mongolia, and northern Xinjiang are advised to install the diesel extreme heating system.
14
3
Share

What does EBD failure mean?

It indicates a problem with the Electronic Brakeforce Distribution control system. Here is relevant information about EBD: 1. Full name: The English full name of EBD is Electronic Brakeforce Distribution, meaning electronic brake force distribution. 2. EBD: EBD is an auxiliary function of ABS (Anti-lock Braking System) and can only be used in combination to simultaneously improve the safety factor of vehicle emergency braking. 3. Function of EBD: Vehicles equipped with the EBD system will automatically detect the adhesion condition between each wheel and the ground, and appropriately distribute the force generated by the braking system to the four wheels.
20
2
Share

How many days of study are required for Subject 2 before taking the test?

Subject 2 can be tested after 10 to 15 days of study. The theoretical study time is 2 hours, and the practical study time is 22 hours. The precautions for the Subject 2 test include: 1. Preparation stage: During the preparation for getting into the car, you must adjust the seat and fasten the seat belt before verifying the fingerprint. Wait for the instructions of the accompanying coach before operating. 2. Follow the test rules: Each test item in the test field is detected by GPS positioning. The control line (yellow dotted line) of each item represents the test area of that item. As long as the front of the vehicle passes the control line, it means the test has started, and the test must be completed according to the rules of the item, otherwise it will fail. 3. Confirm the progress of the vehicle in front: Before entering the next test item each time, confirm whether there are still vehicles taking the test in front. If there is a vehicle taking the test in the front item, you must stop and wait before the yellow line of the item and must not enter.
12
1
Share

Will You Fail the Driving Test if You Exceed the Time Limit for Reversing into the Garage in Subject Two?

The reversing into the garage test in Subject Two has a time limit of 3 minutes and 30 seconds. Failing to complete the test within this time will result in a failing score. Below is relevant information about reversing into the garage: 1. Overview: Reversing into the garage became a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to maneuver the vehicle within a designated area. Reversing into the garage is a key evaluation point in the driver's test, requiring the driver to correctly reverse the vehicle into the garage from both sides while in motion. 2. Evaluation Criteria: (1) Failing to follow the designated route or sequence results in failure. (2) If the vehicle body crosses the line or fails to enter the garage, it results in failure. (3) Exceeding 210 seconds without completing the reversing into the garage results in failure. (4) Stopping midway deducts 5 points each time.
12
5
Share

What to Do When a New Energy Vehicle Runs Out of Power on the Highway?

New energy vehicle runs out of power on the highway processing method: pull over, turn on the hazard lights, place a triangular safety warning sign 150 meters behind the vehicle, leave the vehicle and call the manufacturer's 400 customer service or 4S store for assistance. The following is an introduction to new energy vehicles: 1. Definition of new energy vehicles: Pure electric vehicles, plug-in (including range-extended) hybrid vehicles, and fuel cell vehicles that are licensed for sale in China. 2. Relevant standards for new energy vehicles: Meet the technical requirements for new energy vehicle products, pass the special inspection for new energy vehicles, and meet the special inspection standards for new energy vehicle products. 3. Relevant requirements for new energy vehicles: New energy vehicle manufacturers or importers must comply with relevant requirements in terms of product quality assurance, product consistency, after-sales service, safety monitoring, and power battery recycling.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.